Re: [PATCH v10 2/3] clk: exynos5410: register clocks using common clock framework

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Quoting Tarek Dakhran (2014-05-23 03:35:42)
> The EXYNOS5410 clocks are statically listed and registered
> using the Samsung specific common clock helper functions.
> 
> Signed-off-by: Tarek Dakhran <t.dakhran@xxxxxxxxxxx>
> Signed-off-by: Vyacheslav Tyrtov <v.tyrtov@xxxxxxxxxxx>

Quick glance over it. Looks good to me.

Regards,
Mike

> ---
>  .../devicetree/bindings/clock/exynos5410-clock.txt |   51 +++++
>  drivers/clk/samsung/Makefile                       |    1 +
>  drivers/clk/samsung/clk-exynos5410.c               |  209 ++++++++++++++++++++
>  include/dt-bindings/clock/exynos5410.h             |   33 ++++
>  4 files changed, 294 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/clock/exynos5410-clock.txt
>  create mode 100644 drivers/clk/samsung/clk-exynos5410.c
>  create mode 100644 include/dt-bindings/clock/exynos5410.h
> 
> diff --git a/Documentation/devicetree/bindings/clock/exynos5410-clock.txt b/Documentation/devicetree/bindings/clock/exynos5410-clock.txt
> new file mode 100644
> index 0000000..82337c4
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/exynos5410-clock.txt
> @@ -0,0 +1,51 @@
> +* Samsung Exynos5410 Clock Controller
> +
> +The Exynos5410 clock controller generates and supplies clock to various
> +controllers within the Exynos5410 SoC.
> +
> +Required Properties:
> +
> +- compatible: should be "samsung,exynos5410-clock"
> +
> +- reg: physical base address of the controller and length of memory mapped
> +  region.
> +
> +- #clock-cells: should be 1.
> +
> +All available clocks are defined as preprocessor macros in
> +dt-bindings/clock/exynos5410.h header and can be used in device
> +tree sources.
> +
> +External clock:
> +There is clock that is generated outside the SoC. It is expected
> +that it is defined using standard clock bindings with following
> + - compatible: should be "samsung,exynos5410-oscclk"
> +
> +Example 1: An example of a clock controller node is listed below.
> +
> +       clock: clock-controller@0x10010000 {
> +               compatible = "samsung,exynos5410-clock";
> +               reg = <0x10010000 0x30000>;
> +               #clock-cells = <1>;
> +       };
> +
> +Example 2: Required external clock.
> +
> +       fixed-rate-clocks {
> +               oscclk {
> +                       compatible = "samsung,exynos5410-oscclk";
> +                       clock-frequency = <24000000>;
> +               };
> +       };
> +
> +Example 3: UART controller node that consumes the clock generated by the clock
> +          controller. Refer to the standard clock bindings for information
> +          about 'clocks' and 'clock-names' property.
> +
> +       serial@12C20000 {
> +               compatible = "samsung,exynos4210-uart";
> +               reg = <0x12C00000 0x100>;
> +               interrupts = <0 51 0>;
> +               clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
> +               clock-names = "uart", "clk_uart_baud0";
> +       };
> diff --git a/drivers/clk/samsung/Makefile b/drivers/clk/samsung/Makefile
> index 25646c6..69e8177 100644
> --- a/drivers/clk/samsung/Makefile
> +++ b/drivers/clk/samsung/Makefile
> @@ -7,6 +7,7 @@ obj-$(CONFIG_SOC_EXYNOS3250)    += clk-exynos3250.o
>  obj-$(CONFIG_ARCH_EXYNOS4)     += clk-exynos4.o
>  obj-$(CONFIG_SOC_EXYNOS5250)   += clk-exynos5250.o
>  obj-$(CONFIG_SOC_EXYNOS5260)   += clk-exynos5260.o
> +obj-$(CONFIG_SOC_EXYNOS5410)   += clk-exynos5410.o
>  obj-$(CONFIG_SOC_EXYNOS5420)   += clk-exynos5420.o
>  obj-$(CONFIG_SOC_EXYNOS5440)   += clk-exynos5440.o
>  obj-$(CONFIG_ARCH_EXYNOS)      += clk-exynos-audss.o
> diff --git a/drivers/clk/samsung/clk-exynos5410.c b/drivers/clk/samsung/clk-exynos5410.c
> new file mode 100644
> index 0000000..c9505ab
> --- /dev/null
> +++ b/drivers/clk/samsung/clk-exynos5410.c
> @@ -0,0 +1,209 @@
> +/*
> + * Copyright (c) 2013 Samsung Electronics Co., Ltd.
> + * Author: Tarek Dakhran <t.dakhran@xxxxxxxxxxx>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * Common Clock Framework support for Exynos5410 SoC.
> +*/
> +
> +#include <dt-bindings/clock/exynos5410.h>
> +
> +#include <linux/clk.h>
> +#include <linux/clkdev.h>
> +#include <linux/clk-provider.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +
> +#include "clk.h"
> +
> +#define APLL_LOCK               0x0
> +#define APLL_CON0               0x100
> +#define CPLL_LOCK               0x10020
> +#define CPLL_CON0               0x10120
> +#define MPLL_LOCK               0x4000
> +#define MPLL_CON0               0x4100
> +#define BPLL_LOCK               0x20010
> +#define BPLL_CON0               0x20110
> +#define KPLL_LOCK               0x28000
> +#define KPLL_CON0               0x28100
> +
> +#define SRC_CPU                        0x200
> +#define DIV_CPU0               0x500
> +#define SRC_CPERI1             0x4204
> +#define DIV_TOP0               0x10510
> +#define DIV_TOP1               0x10514
> +#define DIV_FSYS1              0x1054c
> +#define DIV_FSYS2              0x10550
> +#define DIV_PERIC0             0x10558
> +#define SRC_TOP0               0x10210
> +#define SRC_TOP1               0x10214
> +#define SRC_TOP2               0x10218
> +#define SRC_FSYS               0x10244
> +#define SRC_PERIC0             0x10250
> +#define SRC_MASK_FSYS          0x10340
> +#define SRC_MASK_PERIC0                0x10350
> +#define GATE_BUS_FSYS0         0x10740
> +#define GATE_IP_FSYS           0x10944
> +#define GATE_IP_PERIC          0x10950
> +#define GATE_IP_PERIS          0x10960
> +#define SRC_CDREX              0x20200
> +#define SRC_KFC                        0x28200
> +#define DIV_KFC0               0x28500
> +
> +/* list of PLLs */
> +enum exynos5410_plls {
> +       apll, cpll, mpll,
> +       bpll, kpll,
> +       nr_plls                 /* number of PLLs */
> +};
> +
> +/* list of all parent clocks */
> +PNAME(apll_p)          = { "fin_pll", "fout_apll", };
> +PNAME(bpll_p)          = { "fin_pll", "fout_bpll", };
> +PNAME(cpll_p)          = { "fin_pll", "fout_cpll" };
> +PNAME(mpll_p)          = { "fin_pll", "fout_mpll", };
> +PNAME(kpll_p)          = { "fin_pll", "fout_kpll", };
> +
> +PNAME(mout_cpu_p)      = { "mout_apll", "sclk_mpll", };
> +PNAME(mout_kfc_p)      = { "mout_kpll", "sclk_mpll", };
> +
> +PNAME(mpll_user_p)     = { "fin_pll", "sclk_mpll", };
> +PNAME(bpll_user_p)     = { "fin_pll", "sclk_bpll", };
> +PNAME(mpll_bpll_p)     = { "sclk_mpll_muxed", "sclk_bpll_muxed", };
> +
> +PNAME(group2_p)                = { "fin_pll", "fin_pll", "none", "none",
> +                       "none", "none", "sclk_mpll_bpll",
> +                        "none", "none", "sclk_cpll" };
> +
> +static struct samsung_mux_clock exynos5410_mux_clks[] __initdata = {
> +       MUX(0, "mout_apll", apll_p, SRC_CPU, 0, 1),
> +       MUX(0, "mout_cpu", mout_cpu_p, SRC_CPU, 16, 1),
> +
> +       MUX(0, "mout_kpll", kpll_p, SRC_KFC, 0, 1),
> +       MUX(0, "mout_kfc", mout_kfc_p, SRC_KFC, 16, 1),
> +
> +       MUX(0, "sclk_mpll", mpll_p, SRC_CPERI1, 8, 1),
> +       MUX(0, "sclk_mpll_muxed", mpll_user_p, SRC_TOP2, 20, 1),
> +
> +       MUX(0, "sclk_bpll", bpll_p, SRC_CDREX, 0, 1),
> +       MUX(0, "sclk_bpll_muxed", bpll_user_p, SRC_TOP2, 24, 1),
> +
> +       MUX(0, "sclk_cpll", cpll_p, SRC_TOP2, 8, 1),
> +
> +       MUX(0, "sclk_mpll_bpll", mpll_bpll_p, SRC_TOP1, 20, 1),
> +
> +       MUX(0, "mout_mmc0", group2_p, SRC_FSYS, 0, 4),
> +       MUX(0, "mout_mmc1", group2_p, SRC_FSYS, 4, 4),
> +       MUX(0, "mout_mmc2", group2_p, SRC_FSYS, 8, 4),
> +
> +       MUX(0, "mout_uart0", group2_p, SRC_PERIC0, 0, 4),
> +       MUX(0, "mout_uart1", group2_p, SRC_PERIC0, 4, 4),
> +       MUX(0, "mout_uart2", group2_p, SRC_PERIC0, 8, 4),
> +
> +       MUX(0, "mout_aclk200", mpll_bpll_p, SRC_TOP0, 12, 1),
> +       MUX(0, "mout_aclk400", mpll_bpll_p, SRC_TOP0, 20, 1),
> +};
> +
> +static struct samsung_div_clock exynos5410_div_clks[] __initdata = {
> +       DIV(0, "div_arm", "mout_cpu", DIV_CPU0, 0, 3),
> +       DIV(0, "div_arm2", "div_arm", DIV_CPU0, 28, 3),
> +
> +       DIV(0, "div_acp", "div_arm2", DIV_CPU0, 8, 3),
> +       DIV(0, "div_cpud", "div_arm2", DIV_CPU0, 4, 3),
> +       DIV(0, "div_atb", "div_arm2", DIV_CPU0, 16, 3),
> +       DIV(0, "pclk_dbg", "div_arm2", DIV_CPU0, 20, 3),
> +
> +       DIV(0, "div_kfc", "mout_kfc", DIV_KFC0, 0, 3),
> +       DIV(0, "div_aclk", "div_kfc", DIV_KFC0, 4, 3),
> +       DIV(0, "div_pclk", "div_kfc", DIV_KFC0, 20, 3),
> +
> +       DIV(0, "aclk66_pre", "sclk_mpll_muxed", DIV_TOP1, 24, 3),
> +       DIV(0, "aclk66", "aclk66_pre", DIV_TOP0, 0, 3),
> +
> +       DIV(0, "div_mmc0", "mout_mmc0", DIV_FSYS1, 0, 4),
> +       DIV(0, "div_mmc1", "mout_mmc1", DIV_FSYS1, 16, 4),
> +       DIV(0, "div_mmc2", "mout_mmc2", DIV_FSYS2, 0, 4),
> +
> +       DIV_F(0, "div_mmc_pre0", "div_mmc0",
> +                       DIV_FSYS1, 8, 8, CLK_SET_RATE_PARENT, 0),
> +       DIV_F(0, "div_mmc_pre1", "div_mmc1",
> +                       DIV_FSYS1, 24, 8, CLK_SET_RATE_PARENT, 0),
> +       DIV_F(0, "div_mmc_pre2", "div_mmc2",
> +                       DIV_FSYS2, 8, 8, CLK_SET_RATE_PARENT, 0),
> +
> +       DIV(0, "div_uart0", "mout_uart0", DIV_PERIC0, 0, 4),
> +       DIV(0, "div_uart1", "mout_uart1", DIV_PERIC0, 4, 4),
> +       DIV(0, "div_uart2", "mout_uart2", DIV_PERIC0, 8, 4),
> +       DIV(0, "div_uart3", "mout_uart3", DIV_PERIC0, 12, 4),
> +
> +       DIV(0, "aclk200", "mout_aclk200", DIV_TOP0, 12, 3),
> +       DIV(0, "aclk400", "mout_aclk400", DIV_TOP0, 24, 3),
> +};
> +
> +static struct samsung_gate_clock exynos5410_gate_clks[] __initdata = {
> +       GATE(CLK_MCT, "mct", "aclk66", GATE_IP_PERIS, 18, 0, 0),
> +
> +       GATE(CLK_SCLK_MMC0, "sclk_mmc0", "div_mmc_pre0",
> +                       SRC_MASK_FSYS, 0, CLK_SET_RATE_PARENT, 0),
> +       GATE(CLK_SCLK_MMC1, "sclk_mmc1", "div_mmc_pre1",
> +                       SRC_MASK_FSYS, 4, CLK_SET_RATE_PARENT, 0),
> +       GATE(CLK_SCLK_MMC2, "sclk_mmc2", "div_mmc_pre2",
> +                       SRC_MASK_FSYS, 8, CLK_SET_RATE_PARENT, 0),
> +
> +       GATE(CLK_MMC0, "sdmmc0", "aclk200", GATE_BUS_FSYS0, 12, 0, 0),
> +       GATE(CLK_MMC1, "sdmmc1", "aclk200", GATE_BUS_FSYS0, 13, 0, 0),
> +       GATE(CLK_MMC2, "sdmmc2", "aclk200", GATE_BUS_FSYS0, 14, 0, 0),
> +
> +       GATE(CLK_UART0, "uart0", "aclk66", GATE_IP_PERIC, 0, 0, 0),
> +       GATE(CLK_UART1, "uart1", "aclk66", GATE_IP_PERIC, 1, 0, 0),
> +       GATE(CLK_UART2, "uart2", "aclk66", GATE_IP_PERIC, 2, 0, 0),
> +
> +       GATE(CLK_SCLK_UART0, "sclk_uart0", "div_uart0",
> +                       SRC_MASK_PERIC0, 0, CLK_SET_RATE_PARENT, 0),
> +       GATE(CLK_SCLK_UART1, "sclk_uart1", "div_uart1",
> +                       SRC_MASK_PERIC0, 4, CLK_SET_RATE_PARENT, 0),
> +       GATE(CLK_SCLK_UART2, "sclk_uart2", "div_uart2",
> +                       SRC_MASK_PERIC0, 8, CLK_SET_RATE_PARENT, 0),
> +};
> +
> +static struct samsung_pll_clock exynos5410_plls[nr_plls] __initdata = {
> +       [apll] = PLL(pll_35xx, CLK_FOUT_APLL, "fout_apll", "fin_pll", APLL_LOCK,
> +               APLL_CON0, NULL),
> +       [cpll] = PLL(pll_35xx, CLK_FOUT_CPLL, "fout_cpll", "fin_pll", CPLL_LOCK,
> +               CPLL_CON0, NULL),
> +       [mpll] = PLL(pll_35xx, CLK_FOUT_MPLL, "fout_mpll", "fin_pll", MPLL_LOCK,
> +               MPLL_CON0, NULL),
> +       [bpll] = PLL(pll_35xx, CLK_FOUT_BPLL, "fout_bpll", "fin_pll", BPLL_LOCK,
> +               BPLL_CON0, NULL),
> +       [kpll] = PLL(pll_35xx, CLK_FOUT_KPLL, "fout_kpll", "fin_pll", KPLL_LOCK,
> +               KPLL_CON0, NULL),
> +};
> +
> +/* register exynos5410 clocks */
> +static void __init exynos5410_clk_init(struct device_node *np)
> +{
> +       struct samsung_clk_provider *ctx;
> +       void __iomem *reg_base;
> +
> +       reg_base = of_iomap(np, 0);
> +       if (!reg_base)
> +               panic("%s: failed to map registers\n", __func__);
> +
> +       ctx = samsung_clk_init(np, reg_base, CLK_NR_CLKS);
> +
> +       samsung_clk_register_pll(ctx, exynos5410_plls,
> +                       ARRAY_SIZE(exynos5410_plls), reg_base);
> +
> +       samsung_clk_register_mux(ctx, exynos5410_mux_clks,
> +                       ARRAY_SIZE(exynos5410_mux_clks));
> +       samsung_clk_register_div(ctx, exynos5410_div_clks,
> +                       ARRAY_SIZE(exynos5410_div_clks));
> +       samsung_clk_register_gate(ctx, exynos5410_gate_clks,
> +                       ARRAY_SIZE(exynos5410_gate_clks));
> +
> +       pr_debug("Exynos5410: clock setup completed.\n");
> +}
> +CLK_OF_DECLARE(exynos5410_clk, "samsung,exynos5410-clock", exynos5410_clk_init);
> diff --git a/include/dt-bindings/clock/exynos5410.h b/include/dt-bindings/clock/exynos5410.h
> new file mode 100644
> index 0000000..9b180f0
> --- /dev/null
> +++ b/include/dt-bindings/clock/exynos5410.h
> @@ -0,0 +1,33 @@
> +#ifndef _DT_BINDINGS_CLOCK_EXYNOS_5410_H
> +#define _DT_BINDINGS_CLOCK_EXYNOS_5410_H
> +
> +/* core clocks */
> +#define CLK_FIN_PLL 1
> +#define CLK_FOUT_APLL 2
> +#define CLK_FOUT_CPLL 3
> +#define CLK_FOUT_MPLL 4
> +#define CLK_FOUT_BPLL 5
> +#define CLK_FOUT_KPLL 6
> +
> +/* gate for special clocks (sclk) */
> +#define CLK_SCLK_UART0 128
> +#define CLK_SCLK_UART1 129
> +#define CLK_SCLK_UART2 130
> +#define CLK_SCLK_UART3 131
> +#define CLK_SCLK_MMC0 132
> +#define CLK_SCLK_MMC1 133
> +#define CLK_SCLK_MMC2 134
> +
> +/* gate clocks */
> +#define CLK_UART0 257
> +#define CLK_UART1 258
> +#define CLK_UART2 259
> +#define CLK_UART3 260
> +#define CLK_MCT 315
> +#define CLK_MMC0 351
> +#define CLK_MMC1 352
> +#define CLK_MMC2 353
> +
> +#define CLK_NR_CLKS 512
> +
> +#endif /* _DT_BINDINGS_CLOCK_EXYNOS_5410_H */
> -- 
> 1.7.9.5
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux