[RFC PATCH] pcie-designware: DT documentation update to clarify DT properties

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Current documentation is not clear enough about the mandatory bindings
to be present in the device node of a snps,dw-pcie compatible pcie
controller. In some cases the property is not present in all drivers.
For example pcie_bus is specified as a clock, but only one of the driver
uses it. This patch attempts to make the documentation consistent with
current implementation so that it is clear enough for anyone who develops
a dw-pcie compatible pcie driver.

CC: Mohit Kumar <mohit.kumar@xxxxxx>
CC: Jingoo Han <jg1.han@xxxxxxxxxxx>
CC: Pratyush Anand <pratyush.anand@xxxxxx>
CC: Richard Zhu <r65037@xxxxxxxxxxxxx>
CC: Kishon Vijay Abraham I <kishon@xxxxxx>
CC: Marek Vasut <marex@xxxxxxx>

Signed-off-by: Murali Karicheri <m-karicheri2@xxxxxx>
---
 .../devicetree/bindings/pci/designware-pcie.txt    |   10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/Documentation/devicetree/bindings/pci/designware-pcie.txt b/Documentation/devicetree/bindings/pci/designware-pcie.txt
index d6fae13..8b9dc52 100644
--- a/Documentation/devicetree/bindings/pci/designware-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/designware-pcie.txt
@@ -4,12 +4,14 @@ Required properties:
 - compatible: should contain "snps,dw-pcie" to identify the
 	core, plus an identifier for the specific instance, such
 	as "samsung,exynos5440-pcie" or "fsl,imx6q-pcie".
-- reg: base addresses and lengths of the pcie controller,
-	the phy controller, additional register for the phy controller.
+- reg: base addresses and lengths of the pcie controller.
+    index 0 - base address and length of RC's config space.
+    index 1 and above: additional registers for the PCI controller
+    that are specific to an implementation.
 - interrupts: interrupt values for level interrupt,
 	pulse interrupt, special interrupt.
-- clocks: from common clock binding: handle to pci clock.
-- clock-names: from common clock binding: should be "pcie" and "pcie_bus".
+- clocks: from common clock binding: handle to list of pci clock.
+- clock-names: from common clock binding: pci clock names: "pcie"
 - #address-cells: set to <3>
 - #size-cells: set to <2>
 - device_type: set to "pci"
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux