On Tue, May 20, 2014 at 12:13:49PM -0700, Florian Fainelli wrote: > This patch adds the Device Tree binding document for the Broadcom > Set-top-box Level 2 interrupt controller hardware. > > Signed-off-by: Brian Norris <computersforpeace@xxxxxxxxx> > Signed-off-by: Florian Fainelli <f.fainelli@xxxxxxxxx> > --- > .../bindings/interrupt-controller/brcm,l2-intc.txt | 29 ++++++++++++++++++++++ > 1 file changed, 29 insertions(+) > create mode 100644 Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.txt > > diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.txt > new file mode 100644 > index 000000000000..448273a30a11 > --- /dev/null > +++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.txt > @@ -0,0 +1,29 @@ > +Broadcom Generic Level 2 Interrupt Controller > + > +Required properties: > + > +- compatible: should be "brcm,l2-intc" > +- reg: specifies the base physical address and size of the registers > +- interrupt-controller: identifies the node as an interrupt controller > +- #interrupt-cells: specifies the number of cells needed to encode an > + interrupt source. Should be 1. > +- interrupt-parent: specifies the phandle to the parent interrupt controller > + this controller is cacaded from > +- interrupts: specifies the interrupt line in the interrupt-parent irq space > + to be used for cascading > + > +Optional properties: > + > +- brcm,irq-can-wake: If present, this means the L2 controller can be used as a > + wakeup source for system suspend/resume. Do we need a vendor-specific property here? I'd much prefer to see a generic implementation. thx, Jason. -- To unsubscribe from this list: send the line "unsubscribe linux-doc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
