Hi Lee Jones,
Thanks for the review.
On Tuesday 20 May 2014 07:28 PM, Lee Jones wrote:
The TPS65917 chip is a power management IC for Portable Navigation Systems
and Tablet Computing devices. It contains the following components:
- Regulators.
- Over Temperature warning and Shut down.
This patch adds support for tps65917 mfd device. At this time only
the regulator functionality is made available.
Signed-off-by: Keerthy <j-keerthy@xxxxxx>
---
Changes in V2:
Added volatile register check as some of the registers
in the set are volatile.
drivers/mfd/Kconfig | 12 +
drivers/mfd/Makefile | 1 +
drivers/mfd/tps65917.c | 573 ++++++++++++++++
We have quite the collection of tps* files now in MFD. How different
are they really? Is consolidation possible?
Unfortunately yes! This is pretty similar to Palmas. Register offsets
are completely different and i have already compensated TPS659038
which essentially had the same register set.
I am pretty much based on Palmas driver but most of the register offsets
are different and this is a much smaller and simpler PMIC. Hence
adding a new driver.
include/linux/mfd/tps65917.h | 1509 ++++++++++++++++++++++++++++++++++++++++++
4 files changed, 2095 insertions(+)
create mode 100644 drivers/mfd/tps65917.c
create mode 100644 include/linux/mfd/tps65917.h
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 3383412..ac73e58 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -925,6 +925,18 @@ config MFD_TPS65912_SPI
If you say yes here you get support for the TPS65912 series of
PM chips with SPI interface.
+config MFD_TPS65917
+ bool "TI TPS65917 series chips"
+ select MFD_CORE
+ select REGMAP_I2C
+ select REGMAP_IRQ
+ depends on I2C=y
+ help
+ If you say yes here you get support for the TPS65917
+ PMIC chips from Texas Instruments. The device provides
+ 5 confgurable SPMSs and 5 LDOs, thermal protection module,
+ GPADC.
+
config MFD_TPS80031
bool "TI TPS80031/TPS80032 Power Management chips"
depends on I2C=y
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 2851275..248a60b 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -69,6 +69,7 @@ tps65912-objs := tps65912-core.o tps65912-irq.o
obj-$(CONFIG_MFD_TPS65912) += tps65912.o
obj-$(CONFIG_MFD_TPS65912_I2C) += tps65912-i2c.o
obj-$(CONFIG_MFD_TPS65912_SPI) += tps65912-spi.o
+obj-$(CONFIG_MFD_TPS65917) += tps65917.o
obj-$(CONFIG_MFD_TPS80031) += tps80031.o
obj-$(CONFIG_MENELAUS) += menelaus.o
diff --git a/drivers/mfd/tps65917.c b/drivers/mfd/tps65917.c
new file mode 100644
index 0000000..dbd67c5
--- /dev/null
+++ b/drivers/mfd/tps65917.c
@@ -0,0 +1,573 @@
+/*
+ * TI TPS65917 Integrated power management chipsets
+ *
+ * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether expressed or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License version 2 for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/regmap.h>
+#include <linux/err.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/tps65917.h>
+#include <linux/of_device.h>
+
+#define TPS65917_EXT_REQ (TPS65917_EXT_CONTROL_ENABLE1 | \
+ TPS65917_EXT_CONTROL_ENABLE2 | \
+ TPS65917_EXT_CONTROL_NSLEEP)
+
+struct tps65917_sleep_requestor_info {
+ int id;
+ int reg_offset;
+ int bit_pos;
+};
+
+#define EXTERNAL_REQUESTOR(_id, _offset, _pos) \
+ [TPS65917_EXTERNAL_REQSTR_ID_##_id] = { \
+ .id = TPS65917_EXTERNAL_REQSTR_ID_##_id, \
+ .reg_offset = _offset, \
+ .bit_pos = _pos, \
+ }
+
+static struct tps65917_sleep_requestor_info sleep_req_info[] = {
+ EXTERNAL_REQUESTOR(REGEN1, 0, 0),
+ EXTERNAL_REQUESTOR(REGEN2, 0, 1),
+ EXTERNAL_REQUESTOR(REGEN3, 0, 6),
+ EXTERNAL_REQUESTOR(SMPS1, 1, 0),
+ EXTERNAL_REQUESTOR(SMPS2, 1, 1),
+ EXTERNAL_REQUESTOR(SMPS3, 1, 2),
+ EXTERNAL_REQUESTOR(SMPS4, 1, 3),
+ EXTERNAL_REQUESTOR(SMPS5, 1, 4),
+ EXTERNAL_REQUESTOR(LDO1, 2, 0),
+ EXTERNAL_REQUESTOR(LDO2, 2, 1),
+ EXTERNAL_REQUESTOR(LDO3, 2, 2),
+ EXTERNAL_REQUESTOR(LDO4, 2, 3),
+ EXTERNAL_REQUESTOR(LDO5, 2, 4),
+};
+
+static int tps65917_voltaile_regs[] = {
+ TPS65917_SMPS1_CTRL,
+ TPS65917_SMPS2_CTRL,
+ TPS65917_SMPS3_CTRL,
+ TPS65917_SMPS4_CTRL,
+ TPS65917_SMPS5_CTRL,
+ TPS65917_LDO1_CTRL,
+ TPS65917_LDO2_CTRL,
+ TPS65917_LDO3_CTRL,
+ TPS65917_LDO4_CTRL,
+ TPS65917_LDO5_CTRL,
+};
+
+static bool is_volatile_reg(struct device *dev, unsigned int reg)
+{
+ int i;
+
+ /*
+ * Caching all the required regulator registers.
+ */
+
+ for (i = 0; i < 11; i++)
Are you sure? Looks like 10 to me.
Use ARRAY_SIZE(tps65917_voltaile_regs) instead
I will use
ARRAY_SIZE(tps65917_voltaile_regs)
.
+ if (reg == tps65917_voltaile_regs[i])
+ return true;
+
+ return false;
+}
[...]
+int tps65917_ext_control_req_config(struct tps65917 *tps65917,
+ enum tps65917_external_requestor_id id,
+ int ext_ctrl, bool enable)
+{
+ int preq_mask_bit = 0;
+ int reg_add = 0;
+ int bit_pos;
+ int ret;
+
+ if (!(ext_ctrl & TPS65917_EXT_REQ))
+ return 0;
+
+ if (id >= TPS65917_EXTERNAL_REQSTR_ID_MAX)
+ return 0;
+
+ if (ext_ctrl & TPS65917_EXT_CONTROL_NSLEEP) {
+ reg_add = TPS65917_NSLEEP_RES_ASSIGN;
+ preq_mask_bit = 0;
+ } else if (ext_ctrl & TPS65917_EXT_CONTROL_ENABLE1) {
+ reg_add = TPS65917_ENABLE1_RES_ASSIGN;
+ preq_mask_bit = 1;
+ } else if (ext_ctrl & TPS65917_EXT_CONTROL_ENABLE2) {
+ reg_add = TPS65917_ENABLE2_RES_ASSIGN;
+ preq_mask_bit = 2;
+ }
+
+ bit_pos = sleep_req_info[id].bit_pos;
+ reg_add += sleep_req_info[id].reg_offset;
New line here.
Ok.
+ if (enable)
+ ret = tps65917_update_bits(tps65917, TPS65917_RESOURCE_BASE,
+ reg_add, BIT(bit_pos), BIT(bit_pos));
+ else
+ ret = tps65917_update_bits(tps65917, TPS65917_RESOURCE_BASE,
+ reg_add, BIT(bit_pos), 0);
Would prefer:
ret = tps65917_update_bits(tps65917, TPS65917_RESOURCE_BASE,
reg_add, BIT(bit_pos),
enable ? BIT(bit_pos) : 0);
Ok. I will do it this way.
+ if (ret < 0) {
+ dev_err(tps65917->dev, "Resource reg 0x%02x update failed %d\n",
+ reg_add, ret);
+ return ret;
+ }
+
+ /* Unmask the PREQ */
+ ret = tps65917_update_bits(tps65917, TPS65917_PMU_CONTROL_BASE,
+ TPS65917_POWER_CTRL, BIT(preq_mask_bit), 0);
+ if (ret < 0) {
+ dev_err(tps65917->dev, "POWER_CTRL register update failed %d\n",
+ ret);
+ return ret;
+ }
+ return ret;
Just display the error - the function returns 'ret' regardless.
Ok.
+}
+EXPORT_SYMBOL_GPL(tps65917_ext_control_req_config);
+
+static int tps65917_set_pdata_irq_flag(struct i2c_client *i2c,
+ struct tps65917_platform_data *pdata)
+{
+ struct irq_data *irq_data = irq_get_irq_data(i2c->irq);
New line here.
Ok
+ if (!irq_data) {
+ dev_err(&i2c->dev, "Invalid IRQ: %d\n", i2c->irq);
+ return -EINVAL;
+ }
+
+ pdata->irq_flags = irqd_get_trigger_type(irq_data);
+ dev_info(&i2c->dev, "Irq flag is 0x%08x\n", pdata->irq_flags);
Is this line really required?
New line here.
Yeah this is more dev_dbg. I will make it dev_dbg message.
+ return 0;
+}
+
+static void tps65917_dt_to_pdata(struct i2c_client *i2c,
+ struct tps65917_platform_data *pdata)
+{
+ struct device_node *node = i2c->dev.of_node;
What kind of node?
Personally, I'd prefer the use of 'np' as a variable name.
Ok.
+ int ret;
+ u32 prop;
+
+ ret = of_property_read_u32(node, "ti,mux-pad1", &prop);
+ if (!ret) {
+ pdata->mux_from_pdata = 1;
This should be a bool.
+ pdata->pad1 = prop;
+ }
+
+ ret = of_property_read_u32(node, "ti,mux-pad2", &prop);
+ if (!ret) {
+ pdata->mux_from_pdata = 1;
As above.
Ok.
+ pdata->pad2 = prop;
+ }
+
+ /* The default for this register is all masked */n
+ ret = of_property_read_u32(node, "ti,power-ctrl", &prop);
+ if (!ret)
+ pdata->power_ctrl = prop;
+ else
+ pdata->power_ctrl = TPS65917_POWER_CTRL_NSLEEP_MASK |
+ TPS65917_POWER_CTRL_ENABLE1_MASK |
+ TPS65917_POWER_CTRL_ENABLE2_MASK;
+ if (i2c->irq)
+ tps65917_set_pdata_irq_flag(i2c, pdata);
What's the point of tps65917_set_pdata_irq_flag() providing a return
value and then not checking it?
Yes. I will remove this check. Largely borrowed from Palmas driver.
+ pdata->pm_off = of_property_read_bool(node,
+ "ti,system-power-controller");
+}
+
+static struct tps65917 *tps65917_dev;
This is never used.
+static const struct of_device_id of_tps65917_match_tbl[] = {
+ {
+ .compatible = "ti,tps65917",
+ },
This can all sit on one line.
Ok.
+ { },
+};
+MODULE_DEVICE_TABLE(of, of_tps65917_match_tbl);
+
+static int tps65917_i2c_probe(struct i2c_client *i2c,
+ const struct i2c_device_id *id)
+{
+ struct tps65917 *tps65917;
+ struct tps65917_platform_data *pdata;
+ struct device_node *node = i2c->dev.of_node;
+ int ret = 0, i;
Break these into separate declarations.
Nit: Put them with the other int declaration(s).
Ok.
+ unsigned int reg, addr, *features;
+ int slave;
+ const struct of_device_id *match;
+
+ pdata = dev_get_platdata(&i2c->dev);
+
+ if (node && !pdata) {
+ pdata = devm_kzalloc(&i2c->dev, sizeof(*pdata), GFP_KERNEL);
+
Remove this line.
Ok.
+ if (!pdata)
+ return -ENOMEM;
+
+ tps65917_dt_to_pdata(i2c, pdata);
I'm sure we can fail here.
They are optional properties. Hence no check.
+ }
+
+ if (!pdata)
+ return -EINVAL;
+
+ tps65917 = devm_kzalloc(&i2c->dev, sizeof(struct tps65917), GFP_KERNEL);
+ if (tps65917 == NULL)
if (!tps65917)
Ok
+ return -ENOMEM;
+
+ i2c_set_clientdata(i2c, tps65917);
Do this at the end after a clean start-up.
+ tps65917->dev = &i2c->dev;
+ tps65917->irq = i2c->irq;
Or just save i2c.
+ match = of_match_device(of_tps65917_match_tbl, &i2c->dev);
+
Remove this line.
Ok
+ if (!match)
+ return -ENODATA;
+
+ features = (unsigned int *)match->data;
This will be NULL, please remove it.
In fact, why are you even checking for a match?
You only support one device.
Ok. Yes agreed.
+ for (i = 0; i < TPS65917_NUM_CLIENTS; i++) {
+ if (i == 0) {
+ tps65917->i2c_clients[i] = i2c;
+ } else {
+ tps65917->i2c_clients[i] =
+ i2c_new_dummy(i2c->adapter,
+ i2c->addr + i);
+ if (!tps65917->i2c_clients[i]) {
+ dev_err(tps65917->dev,
+ "can't attach client %d\n", i);
+ ret = -ENOMEM;
+ goto err_i2c;
+ }
+ tps65917->i2c_clients[i]->dev.of_node = of_node_get(node);
+ }
New line here.
Ok.
+ tps65917->regmap[i] = devm_regmap_init_i2c(tps65917->i2c_clients[i],
+ &tps65917_regmap_config[i]);
+ if (IS_ERR(tps65917->regmap[i])) {
+ ret = PTR_ERR(tps65917->regmap[i]);
+ dev_err(tps65917->dev,
+ "Failed to allocate regmap %d, err: %d\n",
+ i, ret);
+ goto err_i2c;
+ }
+ }
+
+ if (!tps65917->irq) {
+ dev_warn(tps65917->dev, "IRQ missing: skipping irq request\n");
+ goto no_irq;
+ }
+
+ /* Change interrupt line output polarity */
+ if (pdata->irq_flags & IRQ_TYPE_LEVEL_HIGH)
+ reg = TPS65917_POLARITY_CTRL_INT_POLARITY;
+ else
+ reg = 0;
+ ret = tps65917_update_bits(tps65917, TPS65917_PU_PD_OD_BASE,
+ TPS65917_POLARITY_CTRL,
+ TPS65917_POLARITY_CTRL_INT_POLARITY, reg);
Do you need to do this if reg == 0?
No. This can go under if.
+ if (ret < 0) {
+ dev_err(tps65917->dev, "POLARITY_CTRL updat failed: %d\n", ret);
+ goto err_i2c;
+ }
+
+ /* Change IRQ into clear on read mode for efficiency */
+ slave = TPS65917_BASE_TO_SLAVE(TPS65917_INTERRUPT_BASE);
+ addr = TPS65917_BASE_TO_REG(TPS65917_INTERRUPT_BASE, TPS65917_INT_CTRL);
+ reg = TPS65917_INT_CTRL_INT_CLEAR;
+
+ regmap_write(tps65917->regmap[slave], addr, reg);
+
+ ret = regmap_add_irq_chip(tps65917->regmap[slave], tps65917->irq,
+ IRQF_ONESHOT | pdata->irq_flags, 0,
+ &tps65917_irq_chip,
+ &tps65917->irq_data);
+ if (ret < 0)
+ goto err_i2c;
+
+no_irq:
+ slave = TPS65917_BASE_TO_SLAVE(TPS65917_PU_PD_OD_BASE);
+ addr = TPS65917_BASE_TO_REG(TPS65917_PU_PD_OD_BASE,
+ TPS65917_PRIMARY_SECONDARY_PAD1);
+
+ if (pdata->mux_from_pdata) {
+ reg = pdata->pad1;
+ ret = regmap_write(tps65917->regmap[slave], addr, reg);
+ if (ret)
+ goto err_irq;
+ } else {
+ ret = regmap_read(tps65917->regmap[slave], addr, ®);
+ if (ret)
+ goto err_irq;
+ }
Comment this to let us know what you're trying to do.
Ok.
+ addr = TPS65917_BASE_TO_REG(TPS65917_PU_PD_OD_BASE,
+ TPS65917_PRIMARY_SECONDARY_PAD2);
+
+ if (pdata->mux_from_pdata) {
+ reg = pdata->pad2;
+ ret = regmap_write(tps65917->regmap[slave], addr, reg);
+ if (ret)
+ goto err_irq;
+ } else {
+ ret = regmap_read(tps65917->regmap[slave], addr, ®);
+ if (ret)
+ goto err_irq;
+ }
Same here.
Ok.
+ reg = pdata->power_ctrl;
+
+ slave = TPS65917_BASE_TO_SLAVE(TPS65917_PMU_CONTROL_BASE);
+ addr = TPS65917_BASE_TO_REG(TPS65917_PMU_CONTROL_BASE,
+ TPS65917_POWER_CTRL);
+
+ ret = regmap_write(tps65917->regmap[slave], addr, reg);
+ if (ret)
+ goto err_irq;
And here.
+ /*
+ * If we are probing with DT do this the DT way and return here
+ * otherwise continue and add devices using mfd helpers.
MFD
Ok
+ */
+ if (node) {
+ ret = of_platform_populate(node, NULL, NULL, &i2c->dev);
What is it you're registering here? I don't see any child devices
anywhere.
+ if (ret < 0)
+ goto err_irq;
+ else if (pdata->pm_off && !pm_power_off)
No need for the else.
Ok
+ tps65917_dev = tps65917;
What does this do?
+ }
+
+ return ret;
Where does it continue and add devices using the MFD helpers?
I will remove this part.
+err_irq:
+ regmap_del_irq_chip(tps65917->irq, tps65917->irq_data);
+err_i2c:
+ for (i = 1; i < TPS65917_NUM_CLIENTS; i++) {
+ if (tps65917->i2c_clients[i])
+ i2c_unregister_device(tps65917->i2c_clients[i]);
+ }
New line here.
Ok.
+ return ret;
+}
+
+static int tps65917_i2c_remove(struct i2c_client *i2c)
+{
+ struct tps65917 *tps65917 = i2c_get_clientdata(i2c);
+ int i;
+
+ regmap_del_irq_chip(tps65917->irq, tps65917->irq_data);
+
+ for (i = 1; i < TPS65917_NUM_CLIENTS; i++) {
+ if (tps65917->i2c_clients[i])
+ i2c_unregister_device(tps65917->i2c_clients[i]);
+ }
+
+ return 0;
+}
+
+static const struct i2c_device_id tps65917_i2c_id[] = {
+ { "tps65917", },
+};
+MODULE_DEVICE_TABLE(i2c, tps65917_i2c_id);
+
+static struct i2c_driver tps65917_i2c_driver = {
+ .driver = {
+ .name = "tps65917",
+ .of_match_table = of_tps65917_match_tbl,
of_match_ptr()
Ok
+ .owner = THIS_MODULE,
+ },
+ .probe = tps65917_i2c_probe,
+ .remove = tps65917_i2c_remove,
+ .id_table = tps65917_i2c_id,
+};
+
+static int __init tps65917_i2c_init(void)
+{
+ return i2c_add_driver(&tps65917_i2c_driver);
+}
+/* init early so consumer devices can complete system boot */
Defer?
+subsys_initcall(tps65917_i2c_init);
+
+static void __exit tps65917_i2c_exit(void)
+{
+ i2c_del_driver(&tps65917_i2c_driver);
+}
+module_exit(tps65917_i2c_exit);
+
+MODULE_AUTHOR("J Keerthy <j-keerthy@xxxxxx>");
+MODULE_DESCRIPTION("TPS65917 chip family multi-function driver");
Multi-Function Driver
ok
+MODULE_LICENSE("GPL v2");
diff --git a/include/linux/mfd/tps65917.h b/include/linux/mfd/tps65917.h
new file mode 100644
index 0000000..8232e22
--- /dev/null
+++ b/include/linux/mfd/tps65917.h
@@ -0,0 +1,1509 @@
+/*
+ * TI TPS65917
+ *
+ * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether expressed or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License version 2 for more details.
+ */
+
+#ifndef __LINUX_MFD_TPS65917_H
+#define __LINUX_MFD_TPS65917_H
+
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+
+#define TPS65917_NUM_CLIENTS 3
+
+/* The ID_REVISION NUMBERS */
+#define TPS65917_CHIP_ID 0xC035
+#define TPS65917_RESERVED -1
Line up with tabs.
Ok
+struct tps65917 {
+ struct device *dev;
+
+ struct i2c_client *i2c_clients[TPS65917_NUM_CLIENTS];
+ struct regmap *regmap[TPS65917_NUM_CLIENTS];
+
+ /* Stored chip id */
+ int id;
Where is this used?
for this driver this seems redundant. I will remove this.
+ struct tps65917_pmic *pmic;
+
+ /* IRQ Data */
+ int irq;
+ u32 irq_mask;
+ /* mutext for irq */
+ struct mutex irq_lock;
+ struct regmap_irq_chip_data *irq_data;
+};
+
+struct tps65917_reg_init {
+ /* warm_rest controls the voltage levels after a warm reset
+ *
+ * 0: reload default values from OTP on warm reset
+ * 1: maintain voltage from VSEL on warm reset
+ */
Unusual looking comment, please correct.
+ int warm_reset;
Looks like a bool to me.
I will change it to bool
+ /* roof_floor controls whether the regulator uses the i2c style
+ * of DVS or uses the method where a GPIO or other control method is
+ * attached to the NSLEEP/ENABLE1/ENABLE2 pins
+ *
+ * For SMPS
+ *
+ * 0: i2c selection of voltage
+ * 1: pin selection of voltage.
+ *
+ * For LDO unused
+ */
Same here. Top line should not be populated.
Ok
+ int roof_floor;
Only two values is a bool.
ok
+ /* sleep_mode is the mode loaded to MODE_SLEEP bits as defined in
+ * the data sheet.
+ *
+ * For SMPS
+ *
+ * 0: Off
+ * 1: AUTO
+ * 2: ECO
+ * 3: Forced PWM
+ *
+ * For LDO
+ *
+ * 0: Off
+ * 1: On
+ */
+ int mode_sleep;
+
+ /* voltage_sel is the bitfield loaded onto the SMPSX_VOLTAGE
+ * register. Set this is the default voltage set in OTP needs
+ * to be overridden.
+ */
+ u8 vsel;
+};
+
+enum tps65917_regulators {
+ /* SMPS regulators */
+ TPS65917_REG_SMPS1,
+ TPS65917_REG_SMPS2,
+ TPS65917_REG_SMPS3,
+ TPS65917_REG_SMPS4,
+ TPS65917_REG_SMPS5,
+ /* LDO regulators */
+ TPS65917_REG_LDO1,
+ TPS65917_REG_LDO2,
+ TPS65917_REG_LDO3,
+ TPS65917_REG_LDO4,
+ TPS65917_REG_LDO5,
+ TPS65917_REG_REGEN1,
+ TPS65917_REG_REGEN2,
+ TPS65917_REG_REGEN3,
+
+ /* Total number of regulators */
+ TPS65917_NUM_REGS,
+};
+
+struct tps65917_pmic_platform_data {
+ /* An array of pointers to regulator init data indexed by regulator
+ * ID
+ */
Odd multi-line comments throughout.
oops. I will correct this.
+ struct regulator_init_data *reg_data[TPS65917_NUM_REGS];
+
+ /* An array of pointers to structures containing sleep mode and DVS
+ * configuration for regulators indexed by ID
+ */
+ struct tps65917_reg_init *reg_init[TPS65917_NUM_REGS];
+};
+
+
+struct tps65917_platform_data {
+ int irq_flags;
+ int gpio_base;
+
+ /* bit value to be loaded to the POWER_CTRL register */
+ u8 power_ctrl;
+
+ /*
+ * boolean to select if we want to configure muxing here
+ * then the two value to load into the registers if true
+ */
+ int mux_from_pdata;
+ u8 pad1, pad2;
+ bool pm_off;
+
+ struct tps65917_pmic_platform_data *pmic_pdata;
+};
+
+/* Define the tps65917 IRQ numbers */
+enum tps65917_irqs {
+ /* INT1 registers */
+ TPS65917_RESERVED1,
+ TPS65917_PWRON_IRQ,
+ TPS65917_LONG_PRESS_KEY_IRQ,
+ TPS65917_RESERVED2,
+ TPS65917_PWRDOWN_IRQ,
+ TPS65917_HOTDIE_IRQ,
+ TPS65917_VSYS_MON_IRQ,
+ TPS65917_RESERVED3,
+ /* INT2 registers */
+ TPS65917_RESERVED4,
+ TPS65917_OTP_ERROR_IRQ,
+ TPS65917_WDT_IRQ,
+ TPS65917_RESERVED5,
+ TPS65917_RESET_IN_IRQ,
+ TPS65917_FSD_IRQ,
+ TPS65917_SHORT_IRQ,
+ TPS65917_RESERVED6,
+ /* INT3 registers */
+ TPS65917_GPADC_AUTO_0_IRQ,
+ TPS65917_GPADC_AUTO_1_IRQ,
+ TPS65917_GPADC_EOC_SW_IRQ,
+ TPS65917_RESREVED6,
+ TPS65917_RESERVED7,
+ TPS65917_RESERVED8,
+ TPS65917_RESERVED9,
+ TPS65917_VBUS_IRQ,
+ /* INT4 registers */
+ TPS65917_GPIO_0_IRQ,
+ TPS65917_GPIO_1_IRQ,
+ TPS65917_GPIO_2_IRQ,
+ TPS65917_GPIO_3_IRQ,
+ TPS65917_GPIO_4_IRQ,
+ TPS65917_GPIO_5_IRQ,
+ TPS65917_GPIO_6_IRQ,
+ TPS65917_RESERVED10,
+ /* Total Number IRQs */
+ TPS65917_NUM_IRQ,
+};
+
+/* External controll signal name */
Spelling.
I will correct this.
+enum {
+ TPS65917_EXT_CONTROL_ENABLE1 = 0x1,
+ TPS65917_EXT_CONTROL_ENABLE2 = 0x2,
+ TPS65917_EXT_CONTROL_NSLEEP = 0x4,
+};
+
+/*
+ * TPS65917 device resources can be controlled externally for
+ * enabling/disabling it rather than register write through i2c.
+ * Add the external controlled requestor ID for different resources.
+ */
+enum tps65917_external_requestor_id {
+ TPS65917_EXTERNAL_REQSTR_ID_REGEN1,
+ TPS65917_EXTERNAL_REQSTR_ID_REGEN2,
+ TPS65917_EXTERNAL_REQSTR_ID_REGEN3,
+ TPS65917_EXTERNAL_REQSTR_ID_SMPS1,
+ TPS65917_EXTERNAL_REQSTR_ID_SMPS2,
+ TPS65917_EXTERNAL_REQSTR_ID_SMPS3,
+ TPS65917_EXTERNAL_REQSTR_ID_SMPS4,
+ TPS65917_EXTERNAL_REQSTR_ID_SMPS5,
+ TPS65917_EXTERNAL_REQSTR_ID_LDO1,
+ TPS65917_EXTERNAL_REQSTR_ID_LDO2,
+ TPS65917_EXTERNAL_REQSTR_ID_LDO3,
+ TPS65917_EXTERNAL_REQSTR_ID_LDO4,
+ TPS65917_EXTERNAL_REQSTR_ID_LDO5,
+ /* Last entry */
+ TPS65917_EXTERNAL_REQSTR_ID_MAX,
+};
+
+struct tps65917_pmic {
+ struct tps65917 *tps65917;
+ struct device *dev;
+ struct regulator_desc desc[TPS65917_NUM_REGS];
+ struct regulator_dev *rdev[TPS65917_NUM_REGS];
+ /* pmic mutex */
+ struct mutex mutex;
+ int smps12;
+ int range[TPS65917_REG_SMPS5];
+ unsigned int ramp_delay[TPS65917_REG_SMPS5];
+ unsigned int current_reg_mode[TPS65917_REG_SMPS5];
+};
+
+/* helper macro to get correct slave number */
+#define TPS65917_BASE_TO_SLAVE(x) ((x >> 8) - 1)
+#define TPS65917_BASE_TO_REG(x, y) ((x & 0xff) + y)
+
+/* Base addresses of IP blocks in TPS65917 */
+#define TPS65917_SMPS_DVS_BASE 0x20
+#define TPS65917_VALIDITY_BASE 0x118
+#define TPS65917_SMPS_BASE 0x120
+#define TPS65917_LDO_BASE 0x150
+#define TPS65917_DVFS_BASE 0x180
+#define TPS65917_PMU_CONTROL_BASE 0x1A0
+#define TPS65917_RESOURCE_BASE 0x1D4
+#define TPS65917_PU_PD_OD_BASE 0x1F0
+#define TPS65917_LED_BASE 0x200
+#define TPS65917_INTERRUPT_BASE 0x210
+#define TPS65917_GPIO_BASE 0x280
+#define TPS65917_GPADC_BASE 0x2C0
+#define TPS65917_TRIM_GPADC_BASE 0x3CD
+
+/* Registers for function BACKUP */
+#define TPS65917_BACKUP0 0x0
+#define TPS65917_BACKUP1 0x1
+#define TPS65917_BACKUP2 0x2
+#define TPS65917_BACKUP3 0x3
+#define TPS65917_BACKUP4 0x4
+#define TPS65917_BACKUP5 0x5
+#define TPS65917_BACKUP6 0x6
+#define TPS65917_BACKUP7 0x7
+
+/* Bit definitions for BACKUP0 */
+#define TPS65917_BACKUP0_BACKUP_MASK 0xff
+#define TPS65917_BACKUP0_BACKUP_SHIFT 0
+
+/* Bit definitions for BACKUP1 */
+#define TPS65917_BACKUP1_BACKUP_MASK 0xff
+#define TPS65917_BACKUP1_BACKUP_SHIFT 0
+
+/* Bit definitions for BACKUP2 */
+#define TPS65917_BACKUP2_BACKUP_MASK 0xff
+#define TPS65917_BACKUP2_BACKUP_SHIFT 0
+
+/* Bit definitions for BACKUP3 */
+#define TPS65917_BACKUP3_BACKUP_MASK 0xff
+#define TPS65917_BACKUP3_BACKUP_SHIFT 0
+
+/* Bit definitions for BACKUP4 */
+#define TPS65917_BACKUP4_BACKUP_MASK 0xff
+#define TPS65917_BACKUP4_BACKUP_SHIFT 0
+
+/* Bit definitions for BACKUP5 */
+#define TPS65917_BACKUP5_BACKUP_MASK 0xff
+#define TPS65917_BACKUP5_BACKUP_SHIFT 0
+
+/* Bit definitions for BACKUP6 */
+#define TPS65917_BACKUP6_BACKUP_MASK 0xff
+#define TPS65917_BACKUP6_BACKUP_SHIFT 0
+
+/* Bit definitions for BACKUP7 */
+#define TPS65917_BACKUP7_BACKUP_MASK 0xff
+#define TPS65917_BACKUP7_BACKUP_SHIFT 0
If they do not differ, remove the number and consolidate:
/* Bit definitions for BACKUP{0-7} */
#define TPS65917_BACKUP_BACKUP_MASK 0xff
#define TPS65917_BACKUP_BACKUP_SHIFT 0
Ok
+/* Registers for function SMPS */
+#define TPS65917_SMPS1_CTRL 0x0
+#define TPS65917_SMPS1_FORCE 0x2
+#define TPS65917_SMPS1_VOLTAGE 0x3
+#define TPS65917_SMPS2_CTRL 0x4
+#define TPS65917_SMPS2_FORCE 0x6
+#define TPS65917_SMPS2_VOLTAGE 0x7
+#define TPS65917_SMPS3_CTRL 0xC
+#define TPS65917_SMPS3_FORCE 0xE
+#define TPS65917_SMPS3_VOLTAGE 0xF
+#define TPS65917_SMPS4_CTRL 0x10
+#define TPS65917_SMPS4_VOLTAGE 0x13
+#define TPS65917_SMPS5_CTRL 0x18
+#define TPS65917_SMPS5_VOLTAGE 0x1B
+#define TPS65917_SMPS_CTRL 0x24
+#define TPS65917_SMPS_PD_CTRL 0x25
+#define TPS65917_SMPS_THERMAL_EN 0x27
+#define TPS65917_SMPS_THERMAL_STATUS 0x28
+#define TPS65917_SMPS_SHORT_STATUS 0x29
+#define TPS65917_SMPS_NEGATIVE_CURRENT_LIMIT_EN 0x2A
+#define TPS65917_SMPS_POWERGOOD_MASK1 0x2B
+#define TPS65917_SMPS_POWERGOOD_MASK2 0x2C
+
+/* Bit definitions for SMPS1_CTRL */
+#define TPS65917_SMPS1_CTRL_WR_S 0x80
+#define TPS65917_SMPS1_CTRL_WR_S_SHIFT 7
+#define TPS65917_SMPS1_CTRL_ROOF_FLOOR_EN 0x40
+#define TPS65917_SMPS1_CTRL_ROOF_FLOOR_EN_SHIFT 6
+#define TPS65917_SMPS1_CTRL_STATUS_MASK 0x30
+#define TPS65917_SMPS1_CTRL_STATUS_SHIFT 4
+#define TPS65917_SMPS1_CTRL_MODE_SLEEP_MASK 0x0c
+#define TPS65917_SMPS1_CTRL_MODE_SLEEP_SHIFT 2
+#define TPS65917_SMPS1_CTRL_MODE_ACTIVE_MASK 0x03
+#define TPS65917_SMPS1_CTRL_MODE_ACTIVE_SHIFT 0
Pick a base and stick with it. I suggest hex throughout.
Ok
[...]
+/* Bit definitions for SMPS_PLL_CTRL */
+
+#define TPS65917_SMPS_PLL_CTRL_PLL_EN_PLL_BYPASS_SHIFT 0x8
+#define TPS65917_SMPS_PLL_CTRL_PLL_PLL_EN_BYPASS 3
+#define TPS65917_SMPS_PLL_CTRL_PLL_PLL_BYPASS_CLK_SHIFT 0x4
+#define TPS65917_SMPS_PLL_CTRL_PLL_PLL_BYPASS_CLK 2
+
+
Remove this line.
Ok
+/* Registers for function LDO */
+#define TPS65917_LDO1_CTRL 0x0
+#define TPS65917_LDO1_VOLTAGE 0x1
+#define TPS65917_LDO2_CTRL 0x2
+#define TPS65917_LDO2_VOLTAGE 0x3
+#define TPS65917_LDO3_CTRL 0x4
+#define TPS65917_LDO3_VOLTAGE 0x5
+#define TPS65917_LDO4_CTRL 0xE
+#define TPS65917_LDO4_VOLTAGE 0xF
Also standardise the number of digits represented and either
Ok
capitalise none or all of the hex letters.
Ok
[...]
+static inline int tps65917_read(struct tps65917 *tps65917, unsigned int base,
+ unsigned int reg, unsigned int *val)
+{
+ unsigned int addr = TPS65917_BASE_TO_REG(base, reg);
Extra ' '.
I will remove.
+ int slave_id = TPS65917_BASE_TO_SLAVE(base);
+
+ return regmap_read(tps65917->regmap[slave_id], addr, val);
+}
+
+static inline int tps65917_write(struct tps65917 *tps65917, unsigned int base,
+ unsigned int reg, unsigned int value)
+{
+ unsigned int addr = TPS65917_BASE_TO_REG(base, reg);
+ int slave_id = TPS65917_BASE_TO_SLAVE(base);
+
+ return regmap_write(tps65917->regmap[slave_id], addr, value);
+}
+
+static inline int tps65917_bulk_write(struct tps65917 *tps65917,
+ unsigned int base,
+ unsigned int reg, const void *val,
+ size_t val_count)
+{
+ unsigned int addr = TPS65917_BASE_TO_REG(base, reg);
+ int slave_id = TPS65917_BASE_TO_SLAVE(base);
+
+ return regmap_bulk_write(tps65917->regmap[slave_id], addr,
+ val, val_count);
+}
+
+static inline int tps65917_bulk_read(struct tps65917 *tps65917,
+ unsigned int base,
+ unsigned int reg, void *val,
+ size_t val_count)
+{
+ unsigned int addr = TPS65917_BASE_TO_REG(base, reg);
+ int slave_id = TPS65917_BASE_TO_SLAVE(base);
+
+ return regmap_bulk_read(tps65917->regmap[slave_id], addr,
+ val, val_count);
+}
+
+static inline int tps65917_update_bits(struct tps65917 *tps65917,
+ unsigned int base, unsigned int reg,
+ unsigned int mask, unsigned int val)
+{
+ unsigned int addr = TPS65917_BASE_TO_REG(base, reg);
+ int slave_id = TPS65917_BASE_TO_SLAVE(base);
+
+ return regmap_update_bits(tps65917->regmap[slave_id], addr, mask, val);
+}
+
+static inline int tps65917_irq_get_virq(struct tps65917 *tps65917, int irq)
+{
+ return regmap_irq_get_virq(tps65917->irq_data, irq);
+}
This is quite a lot of overhead. Are you sure you require them?
I will relook at this.
+int tps65917_ext_control_req_config(struct tps65917 *tps65917,
+ enum tps65917_external_requestor_id ext_control_req_id,
+ int ext_ctrl, bool enable);
+
+#endif /* __LINUX_MFD_TPS65917_H */
Thanks,
Keerthy
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
