Re: [rfc]pwm: add xilinx pwm driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 05/15/2014 01:30 PM, Bart Tanghe wrote:
> 
> 
> On 05/15/2014 12:33 PM, Michal Simek wrote:
>> On 05/15/2014 10:50 AM, Bart Tanghe wrote:
>>> On 05/15/2014 09:23 AM, Arnd Bergmann wrote:
>>>> On Wednesday 14 May 2014 13:26:13 Bart Tanghe wrote:
>>>>> @@ -0,0 +1,20 @@
>>>>> +Xilinx PWM controller
>>>>> +
>>>>> +Required properties:
>>>>> +- compatible: should be "xlnx,pwm-xlnx"
>>>>> +- add a clock source to the description
>>>>> +
>>>>> +Examples:
>>>>> +
>>>>> +               axi_timer_0: timer@42800000 {
>>>>> +                       clock-frequency = <100000000>;
>>>>> +                       clocks = <&clkc 15>;
>>>>> +                       compatible = "xlnx,xlnx-pwm";
>>>>> +                       reg = <0x42800000 0x10000>;
>>>>> +                       xlnx,count-width = <0x20>;
>>>>> +                       xlnx,gen0-assert = <0x1>;
>>>>> +                       xlnx,gen1-assert = <0x1>;
>>>>> +                       xlnx,one-timer-only = <0x0>;
>>>>> +                       xlnx,trig0-assert = <0x1>;
>>>>> +                       xlnx,trig1-assert = <0x1>;
>>>>> +               } ;
>>>>>
>>>>
>>>> It seems you are missing a mandatory "#pwm-cells" property.
>>>> How is anybody supposed to use this?
>>>>
>>>>      Arnd
>>>>
>>>
>>> I've added some additional information in the documentation
>>>
>>>
>>>
>>> Xilinx PWM controller
>>>
>>> This driver works together with the Xilinx Axi timer hardware core.
>>> The core is available for the microblaze, powerpc and arm based Xilinx
>>> platforms.
>>>
>>> The axi timer core is implemented in the pl (programmable logic) of the
>>> fpga. The amount is user defined. Each core has two timers and one pwm output.
>>
>> For PWM you have to have 2 timers but core itself can be configured
>> to any configuration and I expect that any output has to be used.
>>
>> Can you describe me your testing enviroment with zedboard?
>> Do you use any additional hw or are using just leds or any device
>> on zedboard?
>>
>> Thanks,
>> Michal
>>
>>
> 
> I'm using the 2 internal timers of the axi_timer core. I've attached the pwm output of the timer core to one of the leds. The generate out0 and generate out1 signals aren't attached.
> I've added 4 axi timers to the design, so I can use the 4 leds of zedboard to visualize and measure the pwm signal.

ok, that's configuration what I expected.
Can you add or just send me this hw design? I can create it myself but
no reason to spend time on it when you have it.

Thanks,
Michal



-- 
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/
Maintainer of Linux kernel - Xilinx Zynq ARM architecture
Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform


Attachment: signature.asc
Description: OpenPGP digital signature


[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux