Re: [PATCH 2/8] clk: berlin: add clock binding docs for Marvell Berlin2 SoCs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

Not much to say,

On 11/05/2014 at 22:24:35 +0200, Sebastian Hesselbarth wrote :
> +* Single-register clock dividers
> +
> +Single-register clock dividers are complex divider cells, allowing
> +to divide a reference clock with a set of fixed dividers. Also they
> +comprise and input clock mux with bypass and an ouput clock gate.
typo here-----^

> +
> +Required properties:
> +- compatible: shall be "marvell,berlin2-clk-div"
> +- reg: address and length of the corresponding DIV registers
> +- #clock-cells: shall be set to 0
> +- clocks: clock specifiers referencing the DIV input clocks
> +- clock-names: array of strings describing the clock specifiers above.
> +    Allowed clock-names are "mux_bypass" for the clock mux bypass selection
> +    and "muxN" (N=0..7) for each of the 8 possible clock mux inputs.
> +

-- 
Alexandre Belloni, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux