Re: [PATCH 06/17] pci: host: pcie-designware: Use *base-mask* for configuring the iATU

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tuesday 13 May 2014 18:56:23 Kishon Vijay Abraham I wrote:
> > If you have a case where the outbound translation is a 256MB (i.e. 28bit)
> > section of the CPU address space, that could be represented as
> > 
> >       ranges = <0x82000000 0 0  0xb0000000  0 0x10000000>;
> > 
> > or 
> > 
> >       ranges = <0x82000000 0 0xb0000000  0xb0000000  0 0x10000000>;
> > 
> > depending on whether you want the BARs to be programmed using a low
> > address 0x0-0x0fffffff or an address matching the window
> > 0xb0000000-0xbfffffff.
> 
> The problem is, for configuring the window starting at 0xb0000000, the ATU
> should be programmed 0x0000000 (the cpu address for it will be 0xb0000000 though).
> 

Then use the first of the two?

	Arnd
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux