Hi Balaji, Tony, all
v12
- drop !CONFIG_OF compile break only exists when
#undef CONFIG_OF after include headers 1/7(Sebastian Reichel)
- do not emit "falling back to polling" if wake_irq not specified
since MMC does not need it, and it might confuse users
only emit if pinmux default/idle is not present or claiming
the irq failed 2/7(Balaji)
- dropped out-of-tree patches 6/7(Balaji)
- mention "ti,am33xx-hsmmc" compatible section in bindings
documentation 1/5
v11
- split !CONFIG_OF compile break into separate patch
- enable IWE/CLKEXTFREE in CON/HCTL register needed for omap4
- '&' vs '&&' in omap_hsmmc_resume, 1/5 (Andreas Müller)
- #define DLEV_DAT instead of BIT(21) 2/5 (Balaji)
- pinctrl_pm_select_default_state() removed, 4/5 (Balaji)
- drop _irqsave/_irqrestore from omap_hsmmc_wake_irq handler since it
can't be preempted by same priority omap_hsmmc_irq handler 1/5(Joel Fernandes)
- replace devres_open_group by explicit devm_free calls 1/5 (Balaji)
- disable_irq_nosync wake_irq since we handle it thread safe 1/5 (Balaji)
- drop 'gpio_dat1' pinctrl states and rework documentation 5/5 (Balaji)
v10
- bug fix on multi-core, untested
- incorporated changes from Balaji
- use devres / RAII mechanism to configure wake_up /
sdio irq capabilities
- drop pinctrl state 'active'
rely on driver-model states 'default', 'idle'
- add specific 'gpio_dat1' state for am335x SWAKEUP hack
- reorganized patches; +1 patch multi-core bugfix / +1 for pinctrl
- rebased 455c6fdbd21916 / cherry-picks from mmc-next
v9
- extended comment about why wake-irq is needed
- drop double '(' ')' around card_detect_irq
- drop final '.' in in subject line of patch
v8
- rebased on top of Tony Lindgren<tony@xxxxxxxxxxx> changes
- improved changelog describing the earlier work
- improved wakeup irq setup
- works for am3730 es platform now
- my changes on top:
- compile tested with #undef CONFIG_OF
- disable wake_irq in handler to prevent infinite loop
- fixed typo and added comment about wake-irq
v7
- rebase on 3.14.0-rc3-49726-g77e15ec
- split omap_hsmmc_pin_init due to regression on omap-3730 platform
v6
- rebase on Linux 3.13-rc3
- reformatting debugfs
v5
- fix compile error introduced by last minute one line fix
v4:
- switch to interrupts-extended format
- drop ti,swakeup-missing flag convert to comaptible section
v3:
- removed gpio_irq from platform_data
v2:
- incorparated changes as suggested by reviewers
- simplified workaround for am335x, gpio will now only wake
the module from runtime suspend, not handle the sdio irq
itself
Andreas Fenkart (6):
mmc: omap_hsmmc: Enable SDIO interrupt
mmc: omap_hsmmc: enable wakeup event for sdio OMAP4
mmc: omap_hsmmc: Extend debugfs by SDIO IRQ handling, runtime state
mmc: omap_hsmmc: abort runtime suspend if pending sdio irq detected
mmc: omap_hsmmc: switch default/idle pinctrl states in runtime hooks
mmc: omap_hsmmc: Pin remux workaround to support SDIO interrupt on
AM335x
.../devicetree/bindings/mmc/ti-omap-hsmmc.txt | 54 ++++
drivers/mmc/host/omap_hsmmc.c | 280 ++++++++++++++++++--
include/linux/platform_data/mmc-omap.h | 1 +
3 files changed, 314 insertions(+), 21 deletions(-)
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
