On 29/04/2014 01:40, Maxime Ripard wrote:
> On Mon, Apr 28, 2014 at 04:58:48PM +0200, Boris BREZILLON wrote:
>> The PRCM (Power/Reset/Clock Management) unit provides several clock
>> devices:
>> - AR100 clk: used to clock the Power Management co-processor
>> - AHB0 clk: used to clock the AHB0 bus
>> - APB0 clk and gates: used to clk
> Used to clk?
"Used to clk peripherals connected on the APB0 bus"
I'll add the missing words in the next version :-).
>
[...]
> Ditto.
>
> And you'll probably want to use devm_ioremap_resource when you'll have
> a single clock for the AR100.
Absolutely.
>
>> +
>> + clk_parent = of_clk_get_parent_name(np, 0);
>> + if (!clk_parent)
>> + return -EINVAL;
[...]
>> +
>> +static struct platform_driver sun6i_a31_prcm_clk_driver = {
>> + .driver = {
>> + .name = "sun6i-a31-prcm-clk",
>> + .owner = THIS_MODULE,
>> + .of_match_table = sun6i_a31_prcm_clk_dt_ids,
>> + },
>> + .probe = sun6i_a31_prcm_clk_probe,
> You're not calling the of_clk_del_provider, and you should probably
> unregister your clocks too.
This driver cannot be compiled as a module, and as a result the probed
clks will never be removed.
Do you really want to support clk removal for this HW block ?
Best Regards,
Boris
--
Boris Brezillon, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
