On 05/06/2014 04:56 PM, Sricharan R wrote: > Some socs have a large number of interrupts requests to service > the needs of its many peripherals and subsystems. All of the interrupt > requests lines from the subsystems are not needed at the same > time, so they have to be muxed to the controllers appropriately. > In such places a interrupt controllers are preceded by an > IRQ CROSSBAR that provides flexibility in muxing the device interrupt > requests to the controller inputs. > > The dts file update to support the crossbar device and convert > peripheral irq numbers to crossbar number are added here. > > This is a rebase of V4 series on top of 3.15-rc4 > > This series depends on crossbar-driver-fixes sent below > http://marc.info/?l=linux-omap&m=139929963420299&w=2 For USB and SATA Tested-by: Roger Quadros <rogerq@xxxxxx> NOTE: I've updated the USB and SATA patches on l-o list to work with this series. cheers, -roger > > Sricharan R (3): > arm: dts: dra7: Add crossbar device binding > arm: dts: dra7: Replace peripheral interrupt numbers with crossbar > inputs > arm: dts: dra7: Add routable-irqs property for gic node > > arch/arm/boot/dts/dra7.dtsi | 109 +++++++++++++++++++++++++------------------ > 1 file changed, 63 insertions(+), 46 deletions(-) > -- To unsubscribe from this list: send the line "unsubscribe linux-doc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
