Export an API to be called by PIPE3 PHY to enable external clock for
PCIE PHY. Added a new compatible for PCIE in omap-control in order to
enable it.
Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx>
---
Documentation/devicetree/bindings/phy/ti-phy.txt | 9 ++--
drivers/phy/phy-omap-control.c | 51 +++++++++++++++++++++-
include/linux/phy/omap_control_phy.h | 14 ++++++
3 files changed, 70 insertions(+), 4 deletions(-)
diff --git a/Documentation/devicetree/bindings/phy/ti-phy.txt b/Documentation/devicetree/bindings/phy/ti-phy.txt
index cf3de7e..bc9afb5 100644
--- a/Documentation/devicetree/bindings/phy/ti-phy.txt
+++ b/Documentation/devicetree/bindings/phy/ti-phy.txt
@@ -9,15 +9,18 @@ Required properties:
e.g. USB2_PHY on OMAP5.
"ti,control-phy-pipe3" - if it has DPLL and individual Rx & Tx power control
e.g. USB3 PHY and SATA PHY on OMAP5.
+ "ti,control-phy-pcie" - for pcie to support external clock for pcie and to
+ set PCS delay value.
+ e.g. PCIE PHY in DRA7x
"ti,control-phy-usb2-dra7" - if it has power down register like USB2 PHY on
DRA7 platform.
"ti,control-phy-usb2-am437" - if it has power down register like USB2 PHY on
AM437 platform.
- reg : Address and length of the register set for the device. It contains
the address of "otghs_control" for control-phy-otghs or "power" register
- for other types.
- - reg-names: should be "otghs_control" control-phy-otghs and "power" for
- other types.
+ for other types and "control_sma" for control-phy-pcie
+ - reg-names: should be "otghs_control" for control-phy-otghs,
+ "control_sma" for control-phy-pcie and "power" for other types.
omap_control_usb: omap-control-usb@4a002300 {
compatible = "ti,control-phy-otghs";
diff --git a/drivers/phy/phy-omap-control.c b/drivers/phy/phy-omap-control.c
index 311b4f9..47a1b6c 100644
--- a/drivers/phy/phy-omap-control.c
+++ b/drivers/phy/phy-omap-control.c
@@ -27,6 +27,40 @@
#include <linux/phy/omap_control_phy.h>
/**
+ * omap_control_pcie_tx_rx_control - PCIe RX and TX control of ACSPCIe
+ * @dev: the control module device
+ * @ctrl: 1, 2 or 3 based on controlling either RX or TX or both of ACSPCIe
+ */
+void omap_control_pcie_tx_rx_control(struct device *dev, u8 ctrl)
+{
+ u32 val;
+ struct omap_control_phy *control_phy;
+
+ if (IS_ERR(dev) || !dev) {
+ pr_err("%s: invalid device\n", __func__);
+ return;
+ }
+
+ control_phy = dev_get_drvdata(dev);
+ if (!control_phy) {
+ dev_err(dev, "%s: invalid control phy device\n", __func__);
+ return;
+ }
+
+ if (control_phy->type != OMAP_CTRL_TYPE_PCIE) {
+ dev_err(dev, "%s: unsupported operation\n", __func__);
+ return;
+ }
+
+ val = readl(control_phy->ctrl_sma);
+ val &= ~(OMAP_CTRL_PCIE_TX_RX_CONTROL_MASK <<
+ OMAP_CTRL_PCIE_TX_RX_CONTROL_SHIFT);
+ val |= ctrl << OMAP_CTRL_PCIE_TX_RX_CONTROL_SHIFT;
+ writel(val, control_phy->ctrl_sma);
+}
+EXPORT_SYMBOL_GPL(omap_control_pcie_tx_rx_control);
+
+/**
* omap_control_phy_power - power on/off the phy using control module reg
* @dev: the control module device
* @on: 0 or 1, based on powering on or off the PHY
@@ -61,6 +95,7 @@ void omap_control_phy_power(struct device *dev, int on)
val |= OMAP_CTRL_DEV_PHY_PD;
break;
+ case OMAP_CTRL_TYPE_PCIE:
case OMAP_CTRL_TYPE_PIPE3:
rate = clk_get_rate(control_phy->sys_clk);
rate = rate/1000000;
@@ -211,6 +246,7 @@ EXPORT_SYMBOL_GPL(omap_control_usb_set_mode);
static const enum omap_control_phy_type otghs_data = OMAP_CTRL_TYPE_OTGHS;
static const enum omap_control_phy_type usb2_data = OMAP_CTRL_TYPE_USB2;
static const enum omap_control_phy_type pipe3_data = OMAP_CTRL_TYPE_PIPE3;
+static const enum omap_control_phy_type pcie_data = OMAP_CTRL_TYPE_PCIE;
static const enum omap_control_phy_type dra7usb2_data = OMAP_CTRL_TYPE_DRA7USB2;
static const enum omap_control_phy_type am437usb2_data = OMAP_CTRL_TYPE_AM437USB2;
@@ -228,6 +264,10 @@ static const struct of_device_id omap_control_phy_id_table[] = {
.data = &pipe3_data,
},
{
+ .compatible = "ti,control-phy-pcie",
+ .data = &pcie_data,
+ },
+ {
.compatible = "ti,control-phy-usb2-dra7",
.data = &dra7usb2_data,
},
@@ -279,7 +319,8 @@ static int omap_control_phy_probe(struct platform_device *pdev)
}
}
- if (control_phy->type == OMAP_CTRL_TYPE_PIPE3) {
+ if (control_phy->type == OMAP_CTRL_TYPE_PIPE3 ||
+ control_phy->type == OMAP_CTRL_TYPE_PCIE) {
control_phy->sys_clk = devm_clk_get(control_phy->dev,
"sys_clkin");
if (IS_ERR(control_phy->sys_clk)) {
@@ -288,6 +329,14 @@ static int omap_control_phy_probe(struct platform_device *pdev)
}
}
+ if (control_phy->type == OMAP_CTRL_TYPE_PCIE) {
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+ "control_sma");
+ control_phy->ctrl_sma = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(control_phy->ctrl_sma))
+ return PTR_ERR(control_phy->ctrl_sma);
+ }
+
dev_set_drvdata(control_phy->dev, control_phy);
return 0;
diff --git a/include/linux/phy/omap_control_phy.h b/include/linux/phy/omap_control_phy.h
index 5450403..15cfbfe 100644
--- a/include/linux/phy/omap_control_phy.h
+++ b/include/linux/phy/omap_control_phy.h
@@ -23,6 +23,7 @@ enum omap_control_phy_type {
OMAP_CTRL_TYPE_OTGHS = 1, /* Mailbox OTGHS_CONTROL */
OMAP_CTRL_TYPE_USB2, /* USB2_PHY, power down in CONTROL_DEV_CONF */
OMAP_CTRL_TYPE_PIPE3, /* PIPE3 PHY, DPLL & seperate Rx/Tx power */
+ OMAP_CTRL_TYPE_PCIE, /* RX TX control of ACSPCIE */
OMAP_CTRL_TYPE_DRA7USB2, /* USB2 PHY, power and power_aux e.g. DRA7 */
OMAP_CTRL_TYPE_AM437USB2, /* USB2 PHY, power e.g. AM437x */
};
@@ -33,6 +34,7 @@ struct omap_control_phy {
u32 __iomem *otghs_control;
u32 __iomem *power;
u32 __iomem *power_aux;
+ u32 __iomem *ctrl_sma;
struct clk *sys_clk;
@@ -63,6 +65,13 @@ enum omap_control_usb_mode {
#define OMAP_CTRL_PIPE3_PHY_TX_RX_POWERON 0x3
#define OMAP_CTRL_PIPE3_PHY_TX_RX_POWEROFF 0x0
+#define OMAP_CTRL_PCIE_TX_RX_CONTROL_SHIFT 0x10
+#define OMAP_CTRL_PCIE_TX_RX_CONTROL_MASK 0x3
+
+#define OMAP_CTRL_PCIE_PHY_TX_ACSPCIE 0x1
+#define OMAP_CTRL_PCIE_PHY_RX_ACSPCIE 0x2
+#define OMAP_CTRL_PCIE_PHY_TX_RX_ACSPCIE 0x3
+
#define OMAP_CTRL_USB2_PHY_PD BIT(28)
#define AM437X_CTRL_USB2_PHY_PD BIT(0)
@@ -74,6 +83,7 @@ enum omap_control_usb_mode {
void omap_control_phy_power(struct device *dev, int on);
void omap_control_usb_set_mode(struct device *dev,
enum omap_control_usb_mode mode);
+void omap_control_pcie_tx_rx_control(struct device *dev, u8 ctrl);
#else
static inline void omap_control_phy_power(struct device *dev, int on)
@@ -84,6 +94,10 @@ static inline void omap_control_usb_set_mode(struct device *dev,
enum omap_control_usb_mode mode)
{
}
+
+static inline void omap_control_pcie_tx_rx_control(struct device *dev, u8 ctrl)
+{
+}
#endif
#endif /* __OMAP_CONTROL_PHY_H__ */
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
