On Sat, May 03, 2014 at 02:21:06PM +0200, Carlo Caione wrote:
> On Sat, May 3, 2014 at 3:09 AM, Maxime Ripard
> <maxime.ripard@xxxxxxxxxxxxxxxxxx> wrote:
> > Hi,
> >
> > On Thu, May 01, 2014 at 02:29:34PM +0200, Carlo Caione wrote:
> >> Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
> >> Signed-off-by: Carlo Caione <carlo@xxxxxxxxxx>
> >> ---
> >> arch/arm/boot/dts/sun4i-a10-a1000.dts | 58 ++++++++++++++++++++++
> >> arch/arm/boot/dts/sun4i-a10-cubieboard.dts | 58 ++++++++++++++++++++++
> >> arch/arm/boot/dts/sun4i-a10-hackberry.dts | 64 ++++++++++++++++++++++++
> >> arch/arm/boot/dts/sun4i-a10-inet97fv2.dts | 58 ++++++++++++++++++++++
> >> arch/arm/boot/dts/sun4i-a10-mini-xplus.dts | 65 +++++++++++++++++++++++++
> >> arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts | 64 ++++++++++++++++++++++++
> >> arch/arm/boot/dts/sun4i-a10-pcduino.dts | 58 ++++++++++++++++++++++
> >> arch/arm/boot/dts/sun7i-a20-cubieboard2.dts | 59 ++++++++++++++++++++++
> >> arch/arm/boot/dts/sun7i-a20-cubietruck.dts | 59 ++++++++++++++++++++++
> >> arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts | 59 ++++++++++++++++++++++
> >> 10 files changed, 602 insertions(+)
> >>
> >> diff --git a/arch/arm/boot/dts/sun4i-a10-a1000.dts b/arch/arm/boot/dts/sun4i-a10-a1000.dts
> >> index fa746aea..57d3fb4 100644
> >> --- a/arch/arm/boot/dts/sun4i-a10-a1000.dts
> >> +++ b/arch/arm/boot/dts/sun4i-a10-a1000.dts
> >> @@ -88,6 +88,56 @@
> >> pinctrl-names = "default";
> >> pinctrl-0 = <&i2c0_pins_a>;
> >> status = "okay";
> >> +
> >> + axp209: pmic@34 {
> >> + compatible = "x-powers,axp209";
> >> + reg = <0x34>;
> >> + interrupts = <0>;
> >> +
> >> + interrupt-controller;
> >> + #interrupt-cells = <1>;
> >> +
> >> + acin-supply = <®_axp_ipsout>;
> >> + vin2-supply = <®_axp_ipsout>;
> >> + vin3-supply = <®_axp_ipsout>;
> >> + ldo24in-supply = <®_axp_ipsout>;
> >> + ldo3in-supply = <®_axp_ipsout>;
> >> + ldo5in-supply = <®_axp_ipsout>;
> >> +
> >> + regulators {
> >> + x-powers,dcdc-freq = <1500>;
> >> +
> >> + axp_vcore_reg: dcdc2 {
> >> + regulator-min-microvolt = <700000>;
> >> + regulator-max-microvolt = <2275000>;
> >> + regulator-always-on;
> >> + };
> >> +
> >> + axp_ddr_reg: dcdc3 {
> >> + regulator-always-on;
> >> + };
> >> +
> >> + axp_rtc_reg: ldo1 {
> >> + regulator-always-on;
> >> + };
> >> +
> >> + axp_analog_reg: ldo2 {
> >> + regulator-always-on;
> >> + };
> >> +
> >> + axp_pll_reg: ldo3 {
> >> + regulator-always-on;
> >> + };
> >> +
> >> + axp_hdmi_reg: ldo4 {
> >> + regulator-always-on;
> >> + };
> >> +
> >> + axp_mic_reg: ldo5 {
> >> + regulator-always-on;
> >
> > Do all these regulators need to be always on? It makes sense for the
> > pll and vcore, but I don't get why the mic and hdmi regulators need
> > this.
>
> I did this way because I don't have the schematics for all the board
> so I thought it was safer to leave all the regulators enabled
Well, we have the schematics for most of these boards (at least all
the cubie and olinuxinos).
As far as the other boards are concerned, if we don't have that
information, I'd say leave them alone until someone has access to
these informations.
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
Attachment:
signature.asc
Description: Digital signature
