On 04/05/2014 02:23 AM, Soren Brinkmann wrote:
> Add binding documentation for the Cadence UART.
>
> Signed-off-by: Soren Brinkmann <soren.brinkmann@xxxxxxxxxx>
> Acked-by: Peter Crosthwaite <peter.crosthwaite@xxxxxxxxxx>
> Acked-by: Rob Herring <robh@xxxxxxxxxx>
> Tested-by: Michal Simek <michal.simek@xxxxxxxxxx>
> ---
>
> Changes in v3: None
> Changes in v2: None
>
> .../devicetree/bindings/serial/cdns,uart.txt | 20 ++++++++++++++++++++
> 1 file changed, 20 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/serial/cdns,uart.txt
>
> diff --git a/Documentation/devicetree/bindings/serial/cdns,uart.txt b/Documentation/devicetree/bindings/serial/cdns,uart.txt
> new file mode 100644
> index 000000000000..a3eb154c32ca
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/serial/cdns,uart.txt
> @@ -0,0 +1,20 @@
> +Binding for Cadence UART Controller
> +
> +Required properties:
> +- compatible : should be "cdns,uart-r1p8", or "xlnx,xuartps"
> +- reg: Should contain UART controller registers location and length.
> +- interrupts: Should contain UART controller interrupts.
> +- clocks: Must contain phandles to the UART clocks
> + See ../clocks/clock-bindings.txt for details.
> +- clock-names: Tuple to identify input clocks, must contain "uart_clk" and "pclk"
> + See ../clocks/clock-bindings.txt for details.
> +
> +
> +Example:
> + uart@e0000000 {
> + compatible = "cdns,uart-r1p8";
> + clocks = <&clkc 23>, <&clkc 40>;
> + clock-names = "uart_clk", "pclk";
> + reg = <0xE0000000 0x1000>;
> + interrupts = <0 27 4>;
> + };
>
Applied to zynq/dt2 branch.
Thanks,
Michal
--
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/
Maintainer of Linux kernel - Xilinx Zynq ARM architecture
Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform
Attachment:
signature.asc
Description: OpenPGP digital signature
