On 24/03/2014 09:27, Boris BREZILLON :
> Update main clk documentation to match main clk implementation rework.
>
> Signed-off-by: Boris BREZILLON <b.brezillon.dev@xxxxxxxxx>
> ---
> .../devicetree/bindings/clock/at91-clock.txt | 56 ++++++++++++++++----
> 1 file changed, 47 insertions(+), 9 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/clock/at91-clock.txt b/Documentation/devicetree/bindings/clock/at91-clock.txt
> index cd5e239..9a7025b 100644
> --- a/Documentation/devicetree/bindings/clock/at91-clock.txt
> +++ b/Documentation/devicetree/bindings/clock/at91-clock.txt
> @@ -15,8 +15,13 @@ Required properties:
> All at91 specific clocks (clocks defined below) must be child
> node of the PMC node.
>
> + "atmel,at91rm9200-clk-main-osc"
> + "atmel,at91sam9x5-clk-main-rc-osc"
> + at91 main clk sources
> +
> + "atmel,at91sam9x5-clk-main"
> "atmel,at91rm9200-clk-main":
> - at91 main oscillator
> + at91 main clock
>
> "atmel,at91rm9200-clk-master" or
> "atmel,at91sam9x5-clk-master":
> @@ -85,24 +90,57 @@ For example:
> /* put at91 clocks here */
> };
>
> +Required properties for main clock oscillator:
> +- interrupt-parent : must reference the PMC node.
> +- interrupts : shall be set to "<0>".
> +- clock-frequency : define the internal RC oscillator frequency.
> +
> +Optional properties:
> +- clock-accuracy : define the internal RC oscillator accuracy.
> +
> +For example:
> + main_rc_osc: main_rc_osc {
> + compatible = "atmel,at91sam9x5-clk-main-rc-osc";
> + interrupt-parent = <&pmc>;
> + interrupts = <0>;
> + clock-frequency = <12000000>;
> + clock-accuracy = <50000000>;
> + };
Don't you swapped this example above with the description below?
> +Required properties for main clock internal RC oscillator:
> +- interrupt-parent : must reference the PMC node.
> +- interrupts : shall be set to "<0>".
> +- #clock-cells : from common clock binding; shall be set to 0.
> +- clocks : shall encode the main osc source clk sources (see atmel datasheet).
> +
> +Optional properties:
> +- atmel,osc-bypass : boolean property. Specified if a clock signal is provided
> + on XIN.
> +
> + clock signal is directly provided on XIN pin.
> +
> +For example:
> + main_osc: main_osc {
> + compatible = "atmel,at91rm9200-clk-main-osc";
> + interrupt-parent = <&pmc>;
> + interrupts = <0>;
> + #clock-cells = <0>;
> + clocks = <&main_xtal>;
> + };
> +
> Required properties for main clock:
> - interrupt-parent : must reference the PMC node.
> - interrupts : shall be set to "<0>".
> - #clock-cells : from common clock binding; shall be set to 0.
> -- clocks (optional if clock-frequency is provided) : shall be the slow clock
> - phandle. This clock is used to calculate the main clock rate if
> - "clock-frequency" is not provided.
> -- clock-frequency : the main oscillator frequency.Prefer the use of
> - "clock-frequency" over automatic clock rate calculation.
> +- clocks : shall encode the main clk sources (see atmel datasheet).
>
> For example:
> main: mainck {
> - compatible = "atmel,at91rm9200-clk-main";
> + compatible = "atmel,at91sam9x5-clk-main";
> interrupt-parent = <&pmc>;
> interrupts = <0>;
> #clock-cells = <0>;
> - clocks = <&ck32k>;
> - clock-frequency = <18432000>;
> + clocks = <&main_rc_osc &main_osc>;
> };
>
> Required properties for master clock:
>
--
Nicolas Ferre
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
