Hi, On Wed, Apr 9, 2014 at 12:45 PM, Matthias Brugger <matthias.bgg@xxxxxxxxx> wrote: > This patch adds a clock source and clock event for the timer found > on the Mediatek SoCs. > > The Mediatek General Porpose Timer block provides five 32 bit timers and > one 64 bit timer. > > Two 32 bit timers are used: > TIMER1: clock events supporting periodic and oneshot events > TIMER2: clock source configured as a free running counter > > The General Porpose Timer block can be run with two clocks. A 13 MHz system > clock and the RTC clock running at 32 KHz. This implementation uses the system > clock. Hm, are you planning on using these on the Cortex-A7-based and newer SoCs? On those, the arm generic timers should be available, and you might be better off just using those there. Of course, you'll still need these for the A9-based platforms, so the driver might very well be needed anyway. Some of the earlier patches seem to be for A7-based systems so I'm not sure what you're primarily working on here. :) -Olof -- To unsubscribe from this list: send the line "unsubscribe linux-doc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
