On Mon, Feb 24, 2014 at 06:37:35PM +0800, Huang Shijie wrote: > This patch adds a new header :spi-nor.h, > and copies all the SPI NOR commands and relative macros into this new header. ... > diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h > new file mode 100644 > index 0000000..483fc2a > --- /dev/null > +++ b/include/linux/mtd/spi-nor.h > @@ -0,0 +1,55 @@ > +#ifndef __LINUX_MTD_SPI_NOR_H > +#define __LINUX_MTD_SPI_NOR_H > + You're missing a copyright and license header. Please submit one against l2-mtd.git/spinor, preferably after the patch series I just sent out that renames a few things here. Regarding copyright assignments (also an issue with spi-nor.c): please carry the original copyright from m25p80.c, and add your own or your employer's wherever your work was a significant addition. > +/* Flash opcodes. */ > +#define OPCODE_WREN 0x06 /* Write enable */ > +#define OPCODE_RDSR 0x05 /* Read status register */ > +#define OPCODE_WRSR 0x01 /* Write status register 1 byte */ > +#define OPCODE_NORM_READ 0x03 /* Read data bytes (low frequency) */ > +#define OPCODE_FAST_READ 0x0b /* Read data bytes (high frequency) */ > +#define OPCODE_DUAL_READ 0x3b /* Read data bytes (Dual SPI) */ > +#define OPCODE_QUAD_READ 0x6b /* Read data bytes (Quad SPI) */ > +#define OPCODE_PP 0x02 /* Page program (up to 256 bytes) */ > +#define OPCODE_BE_4K 0x20 /* Erase 4KiB block */ > +#define OPCODE_BE_4K_PMC 0xd7 /* Erase 4KiB block on PMC chips */ > +#define OPCODE_BE_32K 0x52 /* Erase 32KiB block */ > +#define OPCODE_CHIP_ERASE 0xc7 /* Erase whole flash chip */ > +#define OPCODE_SE 0xd8 /* Sector erase (usually 64KiB) */ > +#define OPCODE_RDID 0x9f /* Read JEDEC ID */ > +#define OPCODE_RDCR 0x35 /* Read configuration register */ > + > +/* 4-byte address opcodes - used on Spansion and some Macronix flashes. */ > +#define OPCODE_NORM_READ_4B 0x13 /* Read data bytes (low frequency) */ > +#define OPCODE_FAST_READ_4B 0x0c /* Read data bytes (high frequency) */ > +#define OPCODE_DUAL_READ_4B 0x3c /* Read data bytes (Dual SPI) */ > +#define OPCODE_QUAD_READ_4B 0x6c /* Read data bytes (Quad SPI) */ > +#define OPCODE_PP_4B 0x12 /* Page program (up to 256 bytes) */ > +#define OPCODE_SE_4B 0xdc /* Sector erase (usually 64KiB) */ > + > +/* Used for SST flashes only. */ > +#define OPCODE_BP 0x02 /* Byte program */ > +#define OPCODE_WRDI 0x04 /* Write disable */ > +#define OPCODE_AAI_WP 0xad /* Auto address increment word program */ > + > +/* Used for Macronix and Winbond flashes. */ > +#define OPCODE_EN4B 0xb7 /* Enter 4-byte mode */ > +#define OPCODE_EX4B 0xe9 /* Exit 4-byte mode */ > + > +/* Used for Spansion flashes only. */ > +#define OPCODE_BRWR 0x17 /* Bank register write */ > + > +/* Status Register bits. */ > +#define SR_WIP 1 /* Write in progress */ > +#define SR_WEL 2 /* Write enable latch */ > +/* meaning of other SR_* bits may differ between vendors */ > +#define SR_BP0 4 /* Block protect 0 */ > +#define SR_BP1 8 /* Block protect 1 */ > +#define SR_BP2 0x10 /* Block protect 2 */ > +#define SR_SRWD 0x80 /* SR write protect */ > + > +#define SR_QUAD_EN_MX 0x40 /* Macronix Quad I/O */ > + > +/* Configuration Register bits. */ > +#define CR_QUAD_EN_SPAN 0x2 /* Spansion Quad I/O */ > + > +#endif Brian -- To unsubscribe from this list: send the line "unsubscribe linux-doc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
