The A31 SoC control its PL pins using a different memory, and needs both a
new gate clk and a reset line to enable these PL port.
Signed-off-by: Boris BREZILLON <boris.brezillon@xxxxxxxxxxxxxxxxxx>
---
arch/arm/boot/dts/sun6i-a31.dtsi | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi
index ed9c2c1..90b3a25 100644
--- a/arch/arm/boot/dts/sun6i-a31.dtsi
+++ b/arch/arm/boot/dts/sun6i-a31.dtsi
@@ -210,13 +210,17 @@
pio: pinctrl@01c20800 {
compatible = "allwinner,sun6i-a31-pinctrl";
- reg = <0x01c20800 0x400>;
+ reg = <0x01c20800 0x400>,
+ <0x01f02c00 0x400>;
interrupts = <0 11 4>,
<0 15 4>,
<0 16 4>,
<0 17 4>;
- clocks = <&apb1_gates 5>;
- clock-names = "pio_clk";
+ clocks = <&apb1_gates 5>,
+ <&apb0_gates 0>;
+ clock-names = "pio_clk", "pioL_clk";
+ resets = <&apb0_rst 0>;
+
gpio-controller;
interrupt-controller;
#address-cells = <1>;
--
1.8.3.2
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
