On March 31, 2014 5:47:08 PM GMT+01:00, Kevin Tsai <ktsai@xxxxxxxxxxxxxxxx> wrote:
>Hi Jonathan,
>
>I will separate device driver and resubmit.
>
>For the SMBus alert, is it possible to use the change address way for
>the
>temporary solution?
Not if there is any hope of getting a better solution. In place. As the merge window has
just opened (and the IIO one closed a while back) there is no hurry. I appreciate this stuff
can be annoying but better to get it right than add some hard to find bugs such as the
address switch would introduce if there are multiple smbus alert devices present.
If we get a simple agreed solution I will pitch to apply it in the stable trees for existing
drivers that do the address switching.
J
>
>Thanks.
>
>Kevin Tsai
>03/31/14
>
>----- Original Message -----
>From: "Jonathan Cameron" <jic23@xxxxxxxxxx>
>To: "Kevin Tsai" <ktsai@xxxxxxxxxxxxxxxx>; "Rob Herring"
><robh+dt@xxxxxxxxxx>; "Pawel Moll" <pawel.moll@xxxxxxx>; "Mark Rutland"
>
><mark.rutland@xxxxxxx>; "Ian Campbell" <ijc+devicetree@xxxxxxxxxxxxxx>;
>
>"Kumar Gala" <galak@xxxxxxxxxxxxxx>; "Rob Landley" <rob@xxxxxxxxxxx>;
>"Grant
>Likely" <grant.likely@xxxxxxxxxx>; "Peter Huewe"
><peter.huewe@xxxxxxxxxxxx>;
>"Arnaud Ebalard" <arno@xxxxxxxxxxxx>; "Jason Gunthorpe"
><jgunthorpe@xxxxxxxxxxxxxxxxxxxx>; "Guenter Roeck"
><linux@xxxxxxxxxxxx>;
>"Mark Brown" <broonie@xxxxxxxxxx>; "Peter Meerwald"
><pmeerw@xxxxxxxxxx>;
>"Lars-Peter Clausen" <lars@xxxxxxxxxx>; "Oleksandr Kravchenko"
><o.v.kravchenko@xxxxxxxxxxxxxxx>; "Jacek Anaszewski"
><j.anaszewski@xxxxxxxxxxx>; "Beomho Seo" <beomho.seo@xxxxxxxxxxx>
>Cc: <devicetree@xxxxxxxxxxxxxxx>; <linux-doc@xxxxxxxxxxxxxxx>;
><linux-iio@xxxxxxxxxxxxxxx>
>Sent: Saturday, March 29, 2014 03:37
>Subject: Re: [PATCH V4 1/1] iio: add Capella cm3218x ambient light
>sensor
>driver.
>
>
>> On 26/03/14 22:43, Kevin Tsai wrote:
>>> Add Capella Microsystem CM3218X family Ambient Light Sensor IIO
>driver.
>>> This driver will convert raw data to lux value. Default parameters
>are
>>> for reference only. It will detect ACPI table to load per-system
>>> manufacturing
>>> parameters.
>>>
>>> V2: Follow Jonathan Cameron's advise to separate device id.
>>> Also, follow Peter Meerwald's advise to correct whitespace, prefix,
>and,
>>> comments.
>>>
>>> V3: Follow Peter Meerwald's advise to create a separated i2c_client
>>> handler to
>>> access SMBus ARA register.
>>>
>>> V4: Follow Srinivas Pandruvada and Peter Meerwald advise. Use
>>> i2c_transfer() to
>>> access SMBus ARA register.
>>>
>>
>> Hi Kevin,
>>
>> I've left the smbus Alert stuff for the outcome of Srinvas' patch
>series.
>> I'm not going to take this driver until that is sorted (plenty of
>time
>> given
>> a cycle is just starting), but in the mean time the following is a
>review
>> of the rest of the code. Various trivial bits and bobs. I'd also
>like
>> you to rename everything to get rid of the wild cards. Pick a part.
>> If you want a good illustration of why we don't use wild cards see
>for
>> example drivers/iio/adc/max1363 for an example of how the parts
>supported
>> by a given driver can expand. Could have started that one with
>max136x :)
>>
>> Jonathan
>>> Signed-off-by: Kevin Tsai <ktsai@xxxxxxxxxxxxxxxx>
>>> ---
>>> .../devicetree/bindings/i2c/trivial-devices.txt | 1 +
>>> drivers/iio/light/Kconfig | 11 +
>>> drivers/iio/light/Makefile | 1 +
>>> drivers/iio/light/cm3218x.c | 797
>>> +++++++++++++++++++++
>>> 4 files changed, 810 insertions(+)
>>> create mode 100644 drivers/iio/light/cm3218x.c
>>>
>>> diff --git
>a/Documentation/devicetree/bindings/i2c/trivial-devices.txt
>>> b/Documentation/devicetree/bindings/i2c/trivial-devices.txt
>>> index 1a1ac2e..c3c869b 100644
>>> --- a/Documentation/devicetree/bindings/i2c/trivial-devices.txt
>>> +++ b/Documentation/devicetree/bindings/i2c/trivial-devices.txt
>>> @@ -17,6 +17,7 @@ at,24c08 i2c serial eeprom (24cxx)
>>> atmel,24c02 i2c serial eeprom (24cxx)
>>> atmel,at97sc3204t i2c trusted platform module (TPM)
>>> capella,cm32181 CM32181: Ambient Light Sensor
>>> +capella,cm3218x CM3218X: Ambient Light Sensor
>>> catalyst,24c32 i2c serial eeprom
>>> dallas,ds1307 64 x 8, Serial, I2C Real-Time Clock
>>> dallas,ds1338 I2C RTC with 56-Byte NV RAM
>>> diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig
>>> index d12b2a0..97a341a 100644
>>> --- a/drivers/iio/light/Kconfig
>>> +++ b/drivers/iio/light/Kconfig
>>> @@ -38,6 +38,17 @@ config CM32181
>>> To compile this driver as a module, choose M here:
>>> the module will be called cm32181.
>>>
>>> +config CM3218X
>>> + depends on I2C
>>> + tristate "CM3218X driver"
>>> + help
>>> + Say Y here if you use cm3218x.
>>> + This option enables ambient light sensor using
>>> + Capella cm3218x device driver.
>>> +
>>> + To compile this driver as a module, choose M here:
>>> + the module will be called cm3218x.
>>> +
>>> config CM36651
>>> depends on I2C
>>> tristate "CM36651 driver"
>>> diff --git a/drivers/iio/light/Makefile b/drivers/iio/light/Makefile
>>> index 60e35ac..a506c23 100644
>>> --- a/drivers/iio/light/Makefile
>>> +++ b/drivers/iio/light/Makefile
>>> @@ -6,6 +6,7 @@
>>> obj-$(CONFIG_ADJD_S311) += adjd_s311.o
>>> obj-$(CONFIG_APDS9300) += apds9300.o
>>> obj-$(CONFIG_CM32181) += cm32181.o
>> We still have a wild card in the filename and some of the definitions
>
>> below.
>> Whilst not as important as the for the device ids it ids prefered to
>just
>> pick an appropriate device and use that name for all of it. That way
>> there is no issue if additional parts are supported in future that
>don't
>> agree with the naming scheme.
>>
>> So please convert all CM3218X to one of the parts. (quick find and
>replace
>> job :)
>>> +obj-$(CONFIG_CM3218X) += cm3218x.o
>>> obj-$(CONFIG_CM36651) += cm36651.o
>>> obj-$(CONFIG_GP2AP020A00F) += gp2ap020a00f.o
>>> obj-$(CONFIG_HID_SENSOR_ALS) += hid-sensor-als.o
>>> diff --git a/drivers/iio/light/cm3218x.c
>b/drivers/iio/light/cm3218x.c
>>> new file mode 100644
>>> index 0000000..fa2fa6d
>>> --- /dev/null
>>> +++ b/drivers/iio/light/cm3218x.c
>>> @@ -0,0 +1,797 @@
>>> +/*
>>> + * Copyright (C) 2014 Capella Microsystems Inc.
>>> + * Author: Kevin Tsai <ktsai@xxxxxxxxxxxxxxxx>
>>> + *
>>> + * This program is free software; you can redistribute it and/or
>modify
>>> it
>>> + * under the terms of the GNU General Public License version 2, as
>>> published
>>> + * by the Free Software Foundation.
>>> + *
>>> + * Special thanks Srinivas Pandruvada
>>> <srinivas.pandruvada@xxxxxxxxxxxxxxx>
>>> + * help to add ACPI support.
>>> + *
>>> + */
>>> +
>>> +#include <linux/delay.h>
>>> +#include <linux/err.h>
>>> +#include <linux/i2c.h>
>>> +#include <linux/mutex.h>
>>> +#include <linux/module.h>
>>> +#include <linux/interrupt.h>
>>> +#include <linux/regulator/consumer.h>
>>> +#include <linux/iio/iio.h>
>>> +#include <linux/iio/sysfs.h>
>>> +#include <linux/iio/events.h>
>>> +#include <linux/init.h>
>>> +
>>> +#ifdef CONFIG_ACPI
>>> +#include <linux/acpi.h>
>>> +#endif /* CONFIG_ACPI */
>>> +
>>> +/* Registers Address */
>>> +#define CM3218X_REG_ADDR_CMD 0x00
>>> +#define CM3218X_REG_ADDR_WH 0x01
>>> +#define CM3218X_REG_ADDR_WL 0x02
>>> +#define CM3218X_REG_ADDR_TEST 0x03
>>> +#define CM3218X_REG_ADDR_ALS 0x04
>>> +#define CM3218X_REG_ADDR_STATUS 0x06
>>> +#define CM3218X_REG_ADDR_ID 0x07
>>> +
>>> +/* Number of Configurable Registers */
>>> +#define CM3218X_CONF_REG_NUM 16
>>> +
>>> +/* CMD register */
>>> +#define CM3218X_CMD_ALS_DISABLE BIT(0)
>>> +#define CM3218X_CMD_ALS_INT_EN BIT(1)
>>> +#define CM3218X_CMD_ALS_THRES_WINDOW BIT(2)
>>> +
>>> +#define CM3218X_CMD_ALS_PERS_SHIFT 4
>>> +#define CM3218X_CMD_ALS_PERS_MASK (0x03 <<
>CM3218X_CMD_ALS_PERS_SHIFT)
>>> +#define CM3218X_CMD_ALS_PERS_DEFAULT (0x01 <<
>>> CM3218X_CMD_ALS_PERS_SHIFT)
>>> +
>>> +#define CM3218X_CMD_ALS_IT_SHIFT 6
>>> +#define CM3218X_CMD_ALS_IT_MASK (0x0F << CM3218X_CMD_ALS_IT_SHIFT)
>>> +#define CM3218X_CMD_ALS_IT_DEFAULT (0x01 <<
>CM3218X_CMD_ALS_IT_SHIFT)
>>> +
>>> +#define CM3218X_CMD_ALS_HS_SHIFT 11
>>> +#define CM3218X_CMD_ALS_HS_MASK (0x01 << CM3218X_CMD_ALS_HS_SHIFT)
>>> +#define CM3218X_CMD_ALS_HS_DEFAULT (0x00 <<
>CM3218X_CMD_ALS_HS_SHIFT)
>>> +
>>> +#define CM3218X_CMD_DEFAULT (CM3218X_CMD_ALS_THRES_WINDOW |\
>>> + CM3218X_CMD_ALS_PERS_DEFAULT |\
>>> + CM3218X_CMD_ALS_IT_DEFAULT |\
>>> + CM3218X_CMD_ALS_HS_DEFAULT)
>>> +
>>> +#define CM3218X_WH_DEFAULT 0xFFFF
>>> +#define CM3218X_WL_DEFAULT 0x0000
>>> +
>>> +#define CM3218X_CALIBSCALE_DEFAULT 100000
>>> +#define CM3218X_CALIBSCALE_RESOLUTION 100000
>>> +#define CM3218X_MLUX_PER_LUX 1000
>>> +#define CM3218X_THRESHOLD_PERCENT 10 /* 10 percent */
>>> +
>>> +#define CM3218X_ARA 0x0C
>>> +
>>> +/* CM3218X family */
>>> +enum {
>>> + cm3218,
>>> + cm32181,
>>> + cm32182
>>> +};
>>> +
>>> +/* CM3218 Family */
>>> +#define CM3218_MLUX_PER_BIT_DEFAULT 5 /* Depend on system */
>>> +#define CM3218_MLUX_PER_BIT_BASE_IT 800000
>>> +static const int CM3218_als_it_bits[] = {0, 1, 2, 3};
>>> +static const int CM3218_als_it_values[] = {100000, 200000, 400000,
>>> 800000};
>>> +
>>> +/* CM32181 Family */
>>> +#define CM32181_MLUX_PER_BIT_DEFAULT 5
>>> +#define CM32181_MLUX_PER_BIT_BASE_IT 800000
>>> +static const int CM32181_als_it_bits[] = {12, 8, 0, 1, 2, 3};
>>> +static const int CM32181_als_it_values[] = {
>>> + 25000, 50000, 100000, 200000, 400000, 800000};
>>> +
>>> +struct cm3218x_als_info {
>>> + u32 id;
>>> + int int_type;
>> slightly nicer to do this as an enum but doesn't really matter.
>>> +#define CM3218X_INT_TYPE_SMBUS 0
>>> +#define CM3218X_INT_TYPE_I2C 1
>>> + int regs_bmp;
>>> + int calibscale;
>>> + int mlux_per_bit;
>>> + int mlux_per_bit_base_it;
>>> + const int *als_it_bits;
>>> + const int *als_it_values;
>>> + const int num_als_it;
>>> + int als_raw;
>>> +};
>>> +
>>> +static struct cm3218x_als_info cm3218_info = {
>>> + .id = 3218,
>>> + .int_type = CM3218X_INT_TYPE_SMBUS,
>>> + .regs_bmp = 0x0F,
>>> + .calibscale = CM3218X_CALIBSCALE_DEFAULT,
>>> + .mlux_per_bit = CM3218_MLUX_PER_BIT_DEFAULT,
>>> + .mlux_per_bit_base_it = CM3218_MLUX_PER_BIT_BASE_IT,
>>> + .als_it_bits = CM3218_als_it_bits,
>>> + .als_it_values = CM3218_als_it_values,
>>> + .num_als_it = ARRAY_SIZE(CM3218_als_it_bits),
>>> +};
>>> +
>>> +static struct cm3218x_als_info cm32181_info = {
>>> + .id = 32181,
>>> + .int_type = CM3218X_INT_TYPE_I2C,
>>> + .regs_bmp = 0x0F,
>>> + .calibscale = CM3218X_CALIBSCALE_DEFAULT,
>>> + .mlux_per_bit = CM32181_MLUX_PER_BIT_DEFAULT,
>>> + .mlux_per_bit_base_it = CM32181_MLUX_PER_BIT_BASE_IT,
>>> + .als_it_bits = CM32181_als_it_bits,
>>> + .als_it_values = CM32181_als_it_values,
>>> + .num_als_it = ARRAY_SIZE(CM32181_als_it_bits),
>>> +};
>>> +
>>> +static struct cm3218x_als_info cm32182_info = {
>>> + .id = 32182,
>>> + .int_type = CM3218X_INT_TYPE_I2C,
>>> + .regs_bmp = 0x0F,
>>> + .calibscale = CM3218X_CALIBSCALE_DEFAULT,
>>> + .mlux_per_bit = CM32181_MLUX_PER_BIT_DEFAULT,
>>> + .mlux_per_bit_base_it = CM32181_MLUX_PER_BIT_BASE_IT,
>>> + .als_it_bits = CM32181_als_it_bits,
>>> + .als_it_values = CM32181_als_it_values,
>>> + .num_als_it = ARRAY_SIZE(CM32181_als_it_bits),
>>> +};
>>> +
>>> +struct cm3218x_chip {
>>> + struct i2c_client *client;
>>> + struct mutex lock;
>>> + u16 conf_regs[CM3218X_CONF_REG_NUM];
>>> + struct cm3218x_als_info *als_info;
>>> +};
>>> +
>>
>> Don't need these next 3 that I can see..
>>> +static int cm3218x_get_lux(struct cm3218x_chip *chip);
>>> +static int cm3218x_threshold_update(struct cm3218x_chip *chip, int
>>> percent);
>>> +static int cm3218x_read_als_it(struct cm3218x_chip *chip, int
>*val2);
>>> +
>> I've left this for now, but we need a proper solution for this.
>> (I'd missed other cases of this hack sneaking in :()
>>> +/**
>>> + * cm3218x_read_ara() - Read ARA register
>>> + * @chip: pointer of struct cm3218x.
>>> + *
>>> + * Read SMBus ARA register.
>>> + *
>>> + * Return: -ENODEV for failed. Otherwise return the register
>value.
>>> + */
>>> +static int cm3218x_read_ara(struct cm3218x_chip *chip)
>>> +{
>>> + unsigned char rxdata;
>>> + struct i2c_msg msgs[] = {
>>> + {
>>> + .addr = CM3218X_ARA,
>>> + .flags = I2C_M_RD,
>>> + .len = 1,
>>> + .buf = &rxdata,
>>> + },
>>> + };
>>> +
>>> + if (i2c_transfer(chip->client->adapter, msgs, 1) < 0)
>>> + return -ENODEV;
>>> + return rxdata;
>>> +}
>>> +
>>> +/**
>>> + * cm3218x_interrupt_config() - Enable/Disable CM3218X interrupt
>>> + * @chip: pointer of struct cm3218x.
>>> + * @enable: 0 to disable; otherwise to enable
>>> + *
>>> + * Config CM3218X interrupt control bit.
>>> + *
>>> + * Return: 0 for success; otherwise for error code.
>>> + */
>>> +static int cm3218x_interrupt_config(struct cm3218x_chip *chip, int
>>> enable)
>>> +{
>>> + struct i2c_client *client = chip->client;
>>> + struct cm3218x_als_info *als_info = chip->als_info;
>>> + int status;
>>> +
>>> + if (!als_info)
>>> + return -ENODEV;
>>> +
>>> + /* Force to clean interrupt */
>>> + if (als_info->int_type == CM3218X_INT_TYPE_I2C) {
>>> + status = i2c_smbus_read_word_data(client,
>>> + CM3218X_REG_ADDR_STATUS);
>>> + if (status < 0)
>>> + als_info->int_type = CM3218X_INT_TYPE_SMBUS;
>>> + }
>>> + if (als_info->int_type == CM3218X_INT_TYPE_SMBUS)
>>> + cm3218x_read_ara(chip);
>>> +
>>> + if (enable)
>>> + chip->conf_regs[CM3218X_REG_ADDR_CMD] |=
>>> + CM3218X_CMD_ALS_INT_EN;
>>> + else
>>> + chip->conf_regs[CM3218X_REG_ADDR_CMD] &=
>>> + ~CM3218X_CMD_ALS_INT_EN;
>>> +
>>> + status = i2c_smbus_write_word_data(client, CM3218X_REG_ADDR_CMD,
>>> + chip->conf_regs[CM3218X_REG_ADDR_CMD]);
>>> +
>>> + if (status < 0)
>>> + return -ENODEV;
>>> +
>>> + return status;
>>> +}
>>> +
>>> +#ifdef CONFIG_ACPI
>>> +/**
>>> + * cm3218x_acpi_get_cpm_info() - Get CPM object from ACPI
>>> + * @client pointer of struct i2c_client.
>>> + * @obj_name pointer of ACPI object name.
>>> + * @count maximum size of return array.
>>> + * @vals pointer of array for return elements.
>>> + *
>>> + * Convert ACPI CPM table to array. Special thanks Srinivas
>Pandruvada's
>>> + * help to implement this routine.
>>> + *
>>> + * Return: -ENODEV for fail. Otherwise is number of elements.
>>> + */
>>> +static int cm3218x_acpi_get_cpm_info(struct i2c_client *client,
>char
>>> *obj_name,
>>> + int count, u64 *vals)
>>> +{
>>> + acpi_handle handle;
>>> + struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL};
>>> + int i;
>>> + acpi_status status;
>>> + union acpi_object *cpm;
>>> +
>>> + handle = ACPI_HANDLE(&client->dev);
>>> + if (!handle)
>>> + return -ENODEV;
>>> +
>>> + status = acpi_evaluate_object(handle, obj_name, NULL, &buffer);
>>> + if (ACPI_FAILURE(status)) {
>>> + dev_err(&client->dev, "object %s not found\n", obj_name);
>>> + return -ENODEV;
>>> + }
>>> +
>>> + cpm = buffer.pointer;
>>> + for (i = 0; i < cpm->package.count && i < count; ++i) {
>>> + union acpi_object *elem;
>>> + elem = &(cpm->package.elements[i]);
>>> + vals[i] = elem->integer.value;
>>> + }
>>> +
>>> + kfree(buffer.pointer);
>>> +
>>> + return cpm->package.count;
>>> +}
>>> +#endif /* CONFIG_ACPI */
>>> +
>>> +/**
>>> + * cm3218x_reg_init() - Initialize CM3218X registers
>>> + * @chip: pointer of struct cm3218x.
>>> + *
>>> + * Initialize CM3218X ambient light sensor register to default
>values.
>>> + *
>>> + Return: 0 for success; otherwise for error code.
>>> + */
>>> +static int cm3218x_reg_init(struct cm3218x_chip *chip)
>>> +{
>>> + struct i2c_client *client = chip->client;
>>> + int i;
>>> + s32 ret;
>>> + struct cm3218x_als_info *als_info;
>>
>> I wonder if it would be cleaner to pull the acpi stuff out
>> to a function call rather than doing the #define stuff
>> inline.
>>
>>> +#ifdef CONFIG_ACPI
>>> + int cpm_elem_count;
>>> + u64 cpm_elems[20];
>>> +#endif /* CONFIG_ACPI */
>>> +
>>> + /* Default device */
>>> + chip->als_info = &cm3218_info;
>>> + chip->conf_regs[CM3218X_REG_ADDR_CMD] = CM3218X_CMD_DEFAULT;
>>> + chip->conf_regs[CM3218X_REG_ADDR_WH] = CM3218X_WH_DEFAULT;
>>> + chip->conf_regs[CM3218X_REG_ADDR_WL] = CM3218X_WL_DEFAULT;
>>> +
>>> + /* Disable interrupt */
>>> + cm3218x_interrupt_config(chip, 0);
>>> +
>>> + /* Disable Test Mode */
>>> + i2c_smbus_write_word_data(client, CM3218X_REG_ADDR_TEST, 0x0000);
>>> +
>>> + /* Disable device */
>>> + i2c_smbus_write_word_data(client, CM3218X_REG_ADDR_CMD,
>>> + CM3218X_CMD_ALS_DISABLE);
>>> +
>>> + /* Identify device */
>>> + ret = i2c_smbus_read_word_data(client, CM3218X_REG_ADDR_ID);
>>> + if (ret < 0)
>>> + return ret;
>>> + switch (ret & 0xFF) {
>>> + case 0x18:
>>> + als_info = chip->als_info = &cm3218_info;
>>> + if (ret & 0x0800)
>>> + als_info->int_type = CM3218X_INT_TYPE_I2C;
>>> + else
>>> + als_info->int_type = CM3218X_INT_TYPE_SMBUS;
>>> + break;
>>> + case 0x81:
>>> + als_info = chip->als_info = &cm32181_info;
>>> + break;
>>> + case 0x82:
>>> + als_info = chip->als_info = &cm32182_info;
>>> + break;
>>> + default:
>>> + return -ENODEV;
>>> + }
>>> +
>>> +#ifdef CONFIG_ACPI
>>> + if (ACPI_HANDLE(&client->dev)) {
>>> + /* Load from ACPI */
>>> + cpm_elem_count = cm3218x_acpi_get_cpm_info(client, "CPM0",
>>> + ARRAY_SIZE(cpm_elems),
>>> + cpm_elems);
>>> + if (cpm_elem_count > 0) {
>>> + int header_num = 3;
>>> + int reg_num = cpm_elem_count - header_num;
>>> +
>>> + als_info->id = cpm_elems[0];
>>> + als_info->regs_bmp = cpm_elems[2];
>>> + for (i = 0; i < reg_num; i++)
>>> + if (als_info->regs_bmp & (1<<i))
>>> + chip->conf_regs[i] =
>>> + cpm_elems[header_num+i];
>>> + }
>>> +
>>> + cpm_elem_count = cm3218x_acpi_get_cpm_info(client, "CPM1",
>>> + ARRAY_SIZE(cpm_elems),
>>> + cpm_elems);
>>> + if (cpm_elem_count > 0) {
>>> + als_info->mlux_per_bit = (int)cpm_elems[0] / 100;
>>> + als_info->calibscale = (int)cpm_elems[1];
>>> + }
>>> + }
>>> +#endif /* CONFIG_ACPI */
>>> +
>>> + /* Force to disable interrupt */
>>> + chip->conf_regs[CM3218X_REG_ADDR_CMD] &= ~CM3218X_CMD_ALS_INT_EN;
>>> +
>>> + /* Initialize registers */
>>> + for (i = 0; i < CM3218X_CONF_REG_NUM; i++) {
>>> + if (als_info->regs_bmp & (1<<i)) {
>>> + ret = i2c_smbus_write_word_data(client, i,
>>> + chip->conf_regs[i]);
>>> + if (ret < 0)
>>> + return ret;
>>> + }
>>> + }
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +/**
>>> + * cm3218x_read_als_it() - Get sensor integration time (ms)
>>> + * @chip: pointer of struct cm3218x
>>> + * @val2: pointer of int to load the als_it value.
>>> + *
>>> + * Report the current integration time in milliseconds.
>>> + *
>>> + * Return: IIO_VAL_INT_PLUS_MICRO for success, otherwise -EINVAL.
>>> + */
>>> +static int cm3218x_read_als_it(struct cm3218x_chip *chip, int
>*val2)
>>> +{
>>> + struct cm3218x_als_info *als_info = chip->als_info;
>>> + u16 als_it;
>>> + int i;
>>> +
>>> + als_it = chip->conf_regs[CM3218X_REG_ADDR_CMD];
>>> + als_it &= CM3218X_CMD_ALS_IT_MASK;
>>> + als_it >>= CM3218X_CMD_ALS_IT_SHIFT;
>>> + for (i = 0; i < als_info->num_als_it; i++) {
>>> + if (als_it == als_info->als_it_bits[i]) {
>>> + *val2 = als_info->als_it_values[i];
>>> + return IIO_VAL_INT_PLUS_MICRO;
>>> + }
>>> + }
>>> +
>>> + return -EINVAL;
>>> +}
>>> +
>>> +/**
>>> + * cm3218x_write_als_it() - Write sensor integration time
>>> + * @chip: pointer of struct cm3218x.
>>> + * @val: integration time in milliseconds.
>>> + *
>>> + * Convert integration time (ms) to sensor value.
>>> + *
>>> + * Return: i2c_smbus_write_word_data command return value.
>>> + */
>>> +static int cm3218x_write_als_it(struct cm3218x_chip *chip, int val)
>>> +{
>>> + struct i2c_client *client = chip->client;
>>> + struct cm3218x_als_info *als_info = chip->als_info;
>>> + u16 als_it;
>>> + int ret, i;
>>> +
>>> + for (i = 0; i < als_info->num_als_it; i++)
>>> + if (val <= als_info->als_it_values[i])
>>> + break;
>>> + if (i >= als_info->num_als_it)
>>> + i = als_info->num_als_it - 1;
>>> +
>>> + als_it = als_info->als_it_bits[i];
>>> + als_it <<= CM3218X_CMD_ALS_IT_SHIFT;
>>> +
>>> + mutex_lock(&chip->lock);
>>> + chip->conf_regs[CM3218X_REG_ADDR_CMD] &=
>>> + ~CM3218X_CMD_ALS_IT_MASK;
>>> + chip->conf_regs[CM3218X_REG_ADDR_CMD] |=
>>> + als_it;
>>> + ret = i2c_smbus_write_word_data(client, CM3218X_REG_ADDR_CMD,
>>> + chip->conf_regs[CM3218X_REG_ADDR_CMD]);
>>> + mutex_unlock(&chip->lock);
>>> +
>>> + return ret;
>>> +}
>>> +
>>> +/**
>>> + * cm3218x_get_lux() - report current lux value
>>> + * @chip: pointer of struct cm3218x.
>>> + *
>>> + * Convert sensor raw data to lux. It depends on integration
>>> + * time and calibscale variable.
>>> + *
>>> + * Return: Positive value is lux, otherwise is error code.
>>> + */
>>> +static int cm3218x_get_lux(struct cm3218x_chip *chip)
>>> +{
>>> + struct i2c_client *client = chip->client;
>>> + struct cm3218x_als_info *als_info = chip->als_info;
>>> + int ret;
>>> + int als_it;
>>> + u64 tmp;
>>> +
>>> + /* Calculate mlux per bit based on als_it */
>>> + ret = cm3218x_read_als_it(chip, &als_it);
>>> + if (ret < 0)
>>> + return -EINVAL;
>>> + tmp = (__force u64)als_info->mlux_per_bit;
>>> + tmp *= als_info->mlux_per_bit_base_it;
>>> + tmp = div_u64(tmp, als_it);
>>> +
>>> + /* Get als_raw */
>>> + if (!(chip->conf_regs[CM3218X_REG_ADDR_CMD] &
>CM3218X_CMD_ALS_INT_EN))
>>> + als_info->als_raw = i2c_smbus_read_word_data(
>>> + client,
>>> + CM3218X_REG_ADDR_ALS);
>>> + if (als_info->als_raw < 0)
>>> + return als_info->als_raw;
>>> +
>>> + tmp *= als_info->als_raw;
>>> + tmp *= als_info->calibscale;
>>> + tmp = div_u64(tmp, CM3218X_CALIBSCALE_RESOLUTION);
>>> + tmp = div_u64(tmp, CM3218X_MLUX_PER_LUX);
>>> +
>>> + if (tmp > 0xFFFF)
>>> + tmp = 0xFFFF;
>>> +
>>> + return (int)tmp;
>>> +}
>>> +
>>> +static int cm3218x_read_raw(struct iio_dev *indio_dev,
>>> + struct iio_chan_spec const *chan,
>>> + int *val, int *val2, long mask)
>>> +{
>>> + struct cm3218x_chip *chip = iio_priv(indio_dev);
>>> + struct cm3218x_als_info *als_info = chip->als_info;
>>> + int ret;
>>> +
>>> + switch (mask) {
>>> + case IIO_CHAN_INFO_PROCESSED:
>>> + ret = cm3218x_get_lux(chip);
>>> + if (ret < 0)
>>> + return ret;
>>> + *val = ret;
>>> + return IIO_VAL_INT;
>>> + case IIO_CHAN_INFO_CALIBSCALE:
>>> + *val = als_info->calibscale;
>>> + return IIO_VAL_INT;
>>> + case IIO_CHAN_INFO_INT_TIME:
>>> + *val = 0;
>>> + ret = cm3218x_read_als_it(chip, val2);
>>> + return ret;
>>> + }
>>> +
>>> + return -EINVAL;
>>> +}
>>> +
>>> +static int cm3218x_write_raw(struct iio_dev *indio_dev,
>>> + struct iio_chan_spec const *chan,
>>> + int val, int val2, long mask)
>>> +{
>>> + struct cm3218x_chip *chip = iio_priv(indio_dev);
>>> + struct cm3218x_als_info *als_info = chip->als_info;
>>> + long ms;
>>> +
>>> + switch (mask) {
>>> + case IIO_CHAN_INFO_CALIBSCALE:
>>> + als_info->calibscale = val;
>>> + return val;
>>> + case IIO_CHAN_INFO_INT_TIME:
>>> + ms = val * 1000000 + val2;
>>> + return cm3218x_write_als_it(chip, (int)ms);
>>> + }
>>> +
>>> + return -EINVAL;
>>> +}
>>> +
>>> +/**
>>> + * cm3218x_get_it_available() - Get available ALS IT value
>>> + * @dev: pointer of struct device.
>>> + * @attr: pointer of struct device_attribute.
>>> + * @buf: pointer of return string buffer.
>>> + *
>>> + * Display the available integration time in milliseconds.
>>> + *
>>> + * Return: string length.
>>> + */
>>> +static ssize_t cm3218x_get_it_available(struct device *dev,
>>> + struct device_attribute *attr, char *buf)
>>> +{
>>> + struct cm3218x_chip *chip = iio_priv(dev_to_iio_dev(dev));
>>> + struct cm3218x_als_info *als_info = chip->als_info;
>>> + int i, len;
>>> +
>>> + for (i = 0, len = 0; i < als_info->num_als_it; i++)
>>> + len += scnprintf(buf + len, PAGE_SIZE - len, "%u.%06u ",
>>
>> It's trivial but should be spaces around the operators under the
>kernel
>> coding style.
>>> + als_info->als_it_values[i]/1000000,
>>> + als_info->als_it_values[i]%1000000);
>>> + return len + scnprintf(buf + len, PAGE_SIZE - len, "\n");
>>> +}
>>> +
>>> +/**
>>> + * cm3218x_threshold_update() - Update the threshold registers.
>>> + * @chip: pointer of struct cm3218x_chip.
>>> + * @percent: +/- percent.
>>> + *
>>> + * Based on the current ALS value, update the hi and low threshold
>>> registers.
>>> + *
>>> + * Return: 0 for success; otherwise for error code.
>> otherwise an error code.
>>> + */
>>> +static int cm3218x_threshold_update(struct cm3218x_chip *chip, int
>>> percent)
>>> +{
>>> + struct i2c_client *client = chip->client;
>>> + struct cm3218x_als_info *als_info = chip->als_info;
>>> + int ret;
>>> + int wh, wl;
>>> +
>>> + ret = als_info->als_raw = i2c_smbus_read_word_data(client,
>>> + CM3218X_REG_ADDR_ALS);
>>> + if (ret < 0)
>>> + return ret;
>>> +
>>> + wh = wl = ret;
>>> + ret *= percent;
>>> + ret /= 100;
>>> + if (ret < 1)
>>> + ret = 1;
>>> + wh += ret;
>>> + wl -= ret;
>>> + if (wh > 65535)
>>> + wh = 65535;
>>> + if (wl < 0)
>>> + wl = 0;
>>> +
>>> + chip->conf_regs[CM3218X_REG_ADDR_WH] = wh;
>>> + ret = i2c_smbus_write_word_data(
>>> + client,
>>> + CM3218X_REG_ADDR_WH,
>>> + chip->conf_regs[CM3218X_REG_ADDR_WH]);
>>> + if (ret < 0)
>>> + return ret;
>>> +
>>> + chip->conf_regs[CM3218X_REG_ADDR_WL] = wl;
>>> + ret = i2c_smbus_write_word_data(
>>> + client,
>>> + CM3218X_REG_ADDR_WL,
>>> + chip->conf_regs[CM3218X_REG_ADDR_WL]);
>>> +
>>> + return ret;
>>> +}
>>> +
>>> +/**
>>> + * cm3218x_event_handler() - Interrupt handling routine.
>>> + * @irq: irq number.
>>> + * @private: pointer of void.
>>> + *
>>> + * Clean interrupt and reset threshold registers.
>>> + *
>>> + * Return: IRQ_HANDLED.
>>> + */
>>> +static irqreturn_t cm3218x_event_handler(int irq, void *private)
>>> +{
>>> + struct iio_dev *dev_info = private;
>>> + struct cm3218x_chip *chip = iio_priv(dev_info);
>>> + int ret;
>>> +
>>> + mutex_lock(&chip->lock);
>>> +
>>> + /* Disable interrupt */
>>> + ret = cm3218x_interrupt_config(chip, 0);
>>> + if (ret < 0)
>>> + goto error_handler_unlock;
>>> +
>>> + /* Update Hi/Lo windows */
>>> + ret = cm3218x_threshold_update(chip, CM3218X_THRESHOLD_PERCENT);
>>> + if (ret < 0)
>>> + goto error_handler_unlock;
>>> +
>>> + /* Enable interrupt */
>>> + cm3218x_interrupt_config(chip, 1);
>>> +
>>> +error_handler_unlock:
>>> + mutex_unlock(&chip->lock);
>> blank line here.
>>> + return IRQ_HANDLED;
>>> +}
>>> +
>>> +static const struct iio_chan_spec cm3218x_channels[] = {
>>> + {
>>> + .type = IIO_LIGHT,
>>> + .info_mask_separate =
>>> + BIT(IIO_CHAN_INFO_PROCESSED) |
>>> + BIT(IIO_CHAN_INFO_CALIBSCALE) |
>>> + BIT(IIO_CHAN_INFO_INT_TIME),
>>> + }
>>> +};
>>> +
>>> +static IIO_DEVICE_ATTR(in_illuminance_integration_time_available,
>>> + S_IRUGO, cm3218x_get_it_available, NULL, 0);
>>> +
>>> +static struct attribute *cm3218x_attributes[] = {
>>> +
>&iio_dev_attr_in_illuminance_integration_time_available.dev_attr.attr,
>>> + NULL,
>>> +};
>>> +
>>> +static const struct attribute_group cm3218x_attribute_group = {
>>> + .attrs = cm3218x_attributes
>>> +};
>>> +
>>> +static const struct iio_info cm3218x_info = {
>>> + .driver_module = THIS_MODULE,
>>> + .read_raw = &cm3218x_read_raw,
>>> + .write_raw = &cm3218x_write_raw,
>>> + .attrs = &cm3218x_attribute_group,
>>> +};
>>> +
>>> +static int cm3218x_probe(struct i2c_client *client,
>>> + const struct i2c_device_id *id)
>>> +{
>>> + struct cm3218x_chip *chip;
>>> + struct iio_dev *indio_dev;
>>> + int ret;
>>> +
>>> + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*chip));
>>> + if (!indio_dev) {
>>> + dev_err(&client->dev, "devm_iio_device_alloc failed\n");
>>> + return -ENOMEM;
>>> + }
>>> +
>>> + chip = iio_priv(indio_dev);
>>> + i2c_set_clientdata(client, indio_dev);
>>> + chip->client = client;
>>> +
>>> + mutex_init(&chip->lock);
>>> + indio_dev->dev.parent = &client->dev;
>>> + indio_dev->channels = cm3218x_channels;
>>> + indio_dev->num_channels = ARRAY_SIZE(cm3218x_channels);
>>> + indio_dev->info = &cm3218x_info;
>>> + if (id && id->name)
>>> + indio_dev->name = id->name;
>>> + else
>>> + indio_dev->name = (char *)dev_name(&client->dev);
>>> + indio_dev->modes = INDIO_DIRECT_MODE;
>>> +
>>> + ret = cm3218x_reg_init(chip);
>>> + if (ret) {
>>> + dev_err(&client->dev,
>>> + "%s: register init failed\n",
>>> + __func__);
>>> + return ret;
>>> + }
>>> +
>>> + if (client->irq) {
>>> + ret = request_threaded_irq(client->irq,
>>> + NULL,
>>> + cm3218x_event_handler,
>>> + IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
>>> + "cm3218x_event",
>>> + indio_dev);
>>> +
>>> + if (ret < 0) {
>>> + dev_err(&client->dev, "irq request error %d\n",
>>> + -ret);
>>> + goto error_disable_int;
>>> + }
>>> + }
>>> +
>>> + ret = iio_device_register(indio_dev);
>>> + if (ret < 0) {
>>> + dev_err(&client->dev,
>>> + "%s: regist device failed\n",
>>> + __func__);
>>> + goto error_free_irq;
>>> + }
>>> +
>>> + if (client->irq) {
>>> + ret = cm3218x_threshold_update(chip, CM3218X_THRESHOLD_PERCENT);
>>> + if (ret < 0)
>>> + goto error_free_irq;
>>> +
>>> + ret = cm3218x_interrupt_config(chip, 1);
>>> + if (ret < 0)
>>> + goto error_free_irq;
>>> + }
>>> +
>>> + return 0;
>>> +
>>> +error_free_irq:
>>> + if (client->irq)
>>> + free_irq(client->irq, indio_dev);
>>> +error_disable_int:
>>> + cm3218x_interrupt_config(chip, 0);
>>> + return ret;
>>> +}
>>> +
>>> +static int cm3218x_remove(struct i2c_client *client)
>>> +{
>>> + struct iio_dev *indio_dev = i2c_get_clientdata(client);
>>> + struct cm3218x_chip *chip = iio_priv(indio_dev);
>>> +
>>> + cm3218x_interrupt_config(chip, 0);
>>> + if (client->irq)
>>> + free_irq(client->irq, indio_dev);
>>> + iio_device_unregister(indio_dev);
>> blank line here.
>>> + return 0;
>>> +}
>>> +
>>> +static const struct i2c_device_id cm3218x_id[] = {
>>> + { "cm3218", cm3218},
>>> + { "cm32181", cm32181},
>>> + { "cm32182", cm32182},
>>> + { }
>>> +};
>>> +
>>> +MODULE_DEVICE_TABLE(i2c, cm3218x_id);
>>> +
>>> +static const struct of_device_id cm3218x_of_match[] = {
>>> + { .compatible = "capella,cm3218" },
>>> + { }
>>> +};
>>> +
>>> +#ifdef CONFIG_ACPI
>>> +static const struct acpi_device_id cm3218x_acpi_match[] = {
>>> + { "CPLM3218", 0},
>>> + {},
>>> +};
>>> +
>>> +MODULE_DEVICE_TABLE(acpi, cm3218x_acpi_match);
>>> +#endif /* CONFIG_ACPI */
>>> +
>>> +static struct i2c_driver cm3218x_driver = {
>>> + .driver = {
>>> + .name = "cm3218x",
>>> +#ifdef CONFIG_ACPI
>>> + .acpi_match_table = ACPI_PTR(cm3218x_acpi_match),
>>> +#endif /* CONFIG_ACPI */
>>> + .of_match_table = of_match_ptr(cm3218x_of_match),
>>> + .owner = THIS_MODULE,
>>> + },
>>> + .id_table = cm3218x_id,
>>> + .probe = cm3218x_probe,
>>> + .remove = cm3218x_remove,
>>> +};
>>> +
>>> +module_i2c_driver(cm3218x_driver);
>>> +
>>> +MODULE_AUTHOR("Kevin Tsai <ktsai@xxxxxxxxxxxxxxxx>");
>>> +MODULE_DESCRIPTION("CM3218X ambient light sensor driver");
>>> +MODULE_LICENSE("GPL");
>>>
>>
>
>--
>To unsubscribe from this list: send the line "unsubscribe linux-iio" in
>the body of a message to majordomo@xxxxxxxxxxxxxxx
>More majordomo info at http://vger.kernel.org/majordomo-info.html
--
Sent from my Android phone with K-9 Mail. Please excuse my brevity.
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
