[RFC PATCH v2 07/10] irqchip: atmel-aic: document new dt properties and children nodes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add irq muxing and irq-mapping dt bindings documentation.

Signed-off-by: Boris BREZILLON <b.brezillon.dev@xxxxxxxxx>
---
 .../bindings/interrupt-controller/atmel,aic.txt    |   42 +++++++++++++++++++-
 1 file changed, 41 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/interrupt-controller/atmel,aic.txt b/Documentation/devicetree/bindings/interrupt-controller/atmel,aic.txt
index 2742e9c..d46ec8e 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/atmel,aic.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/atmel,aic.txt
@@ -18,8 +18,33 @@ Required properties:
   The third cell is used to specify the irq priority from 0 (lowest) to 7
   (highest).
 - reg: Should contain AIC registers location and length
+- #address-cells: Shall be 2. The first cell encodes the irq line (or irq id).
+  The second cell encodes the register offset within the iomem range.
+- #size-cells: Shall be 1.
+- ranges: Defines the iomem ranges attached to a given irq line (e.i. irq
+  line 1 <=> SYSC range).
 - atmel,external-irqs: u32 array of external irqs.
 
+Optional properties:
+- atmel,irq-mapping: u32 mask array representing the available irqs:
+    e.i. : atmel,irq-mapping = <0xffff1fff> => irqs 13 to 15 are unavailables
+
+Optional children nodes:
+- muxed irq entries:
+  Required properties:
+   * compatible: Shall be
+     "atmel,aic-mux-1reg-irq": irq enable/disable/retrieve-status is done by
+     setting/clearing/reading flags in a specific register
+     or
+     "atmel,aic-mux-3reg-irq": irq enable/disable/retrieve-status is done
+     by writing/reading flags in specific enable/disable/mask registers
+   * reg: encode the interrupt control register.
+     The first cell encode the irq line.
+     The second cell encode the offset register within its iomem range
+     The last cell encode the iomem region size (should always be set to 0x4).
+   * atmel,aic-mux-reg-mask: define the mask used to disable the interrupts
+     generated by the muxed entry.
+
 Examples:
 	/*
 	 * AIC
@@ -29,11 +54,26 @@ Examples:
 		interrupt-controller;
 		interrupt-parent;
 		#interrupt-cells = <3>;
+		#address-cells = <2>;
+		#size-cells = <1>;
 		reg = <0xfffff000 0x200>;
+		ranges = <0x1 0x0 0xffffc000 0x4000>;
+
+		dbgu_irq: irq@1,320c {
+			compatible = "atmel,aic-mux-3reg-irq";
+			reg = <1 0x320c 0x4>;
+			atmel,aic-mux-reg-mask = <0xc0001afb>;
+		};
+
+		pmc_irq: irq@1,3c64 {
+			compatible = "atmel,aic-mux-3reg-irq";
+			reg = <1 0x3c64 0x4>;
+			atmel,aic-mux-reg-mask = <0xf0f>;
+		};
 	};
 
 	/*
-	 * An interrupt generating device that is wired to an AIC.
+	 * A device generating interrupts wired to the AIC.
 	 */
 	dma: dma-controller@ffffec00 {
 		compatible = "atmel,at91sam9g45-dma";
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux