On Thu, Mar 27, 2014 at 10:29:22PM +0100, Carlo Caione wrote:
> Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
> Signed-off-by: Carlo Caione <carlo@xxxxxxxxxx>
> ---
> arch/arm/boot/dts/sun4i-a10-a1000.dts | 13 +++++++++++++
> arch/arm/boot/dts/sun4i-a10-cubieboard.dts | 13 +++++++++++++
> arch/arm/boot/dts/sun4i-a10-hackberry.dts | 19 +++++++++++++++++++
> arch/arm/boot/dts/sun4i-a10-inet97fv2.dts | 13 +++++++++++++
> arch/arm/boot/dts/sun4i-a10-mini-xplus.dts | 19 +++++++++++++++++++
> arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts | 19 +++++++++++++++++++
> arch/arm/boot/dts/sun4i-a10-pcduino.dts | 13 +++++++++++++
> arch/arm/boot/dts/sun7i-a20-cubieboard2.dts | 14 ++++++++++++++
> arch/arm/boot/dts/sun7i-a20-cubietruck.dts | 15 +++++++++++++++
> arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts | 14 ++++++++++++++
> 10 files changed, 152 insertions(+)
>
> diff --git a/arch/arm/boot/dts/sun4i-a10-a1000.dts b/arch/arm/boot/dts/sun4i-a10-a1000.dts
> index fa746aea..cf18c4d 100644
> --- a/arch/arm/boot/dts/sun4i-a10-a1000.dts
> +++ b/arch/arm/boot/dts/sun4i-a10-a1000.dts
> @@ -88,6 +88,19 @@
> pinctrl-names = "default";
> pinctrl-0 = <&i2c0_pins_a>;
> status = "okay";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + axp: axp20x@34 {
> + reg = <0x34>;
> + interrupts = <0>;
> +
> + compatible = "x-powers,axp209";
> + interrupt-controller;
> + #interrupt-cells = <1>;
> +
> + /include/ "x-powers-axp209.dtsi"
> + };
> };
> };
Actually, you can make the whole thing much more robust by using the
&label syntax.
Here, you would just include the dtsi at the top of the file, and in
the DTSI, you would have something like:
&axp209 {
regulators {
...
}
}
(Given that the node in your DTS is axp209: pmic@something like
Chen-Yu suggested)
You don't rely any more on the position of the include, and you use a
standard DT syntax.
--
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
Attachment:
signature.asc
Description: Digital signature
