On Wed, Mar 26, 2014 at 5:08 AM, Mark Rutland <mark.rutland@xxxxxxx> wrote:
> On Tue, Mar 25, 2014 at 06:19:24PM +0000, jon@xxxxxxxxxx wrote:
>> +- interrupt-parent: The phandle for the interrupt controller that
>> + services interrupts for this IC.
>> +- interrupts: Specifies the interrupt source of the parent interrupt
>> + controller. The format of the interrupt specifier depends on the
>> + parent interrupt controller.
>
> Just describe what the device-specific interrupt logically is, not what
> the interrupts property means in general.
>
Something like this ok?:
-interrupts: Should contain the UART interrupt
>> +- clocks: phandle to the IC source clock.
>
> Nit: clocks aren't just referred to with phandles; there's a clock
> specifier too.
>
> Either correct the type here or don't mention the type at all, given
> this is a common property.
>
I'm not sure what to do here. Many of the other
devicetree/bindings/serial/*.txt use phandle verbage and also the
devicetree/bindings/clock-bindings.txt documentation for clocks refers
the type as phandle too:
==Clock consumers==
Required properties:
clocks: List of phandle and clock specifier pairs, one pair
for each clock input to the device. Note: if the
clock provider specifies '0' for #clock-cells, then
only the phandle portion of the pair will appear.
Is something like this ok?:
clocks: reference to the source clock
Jon
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
