Re: [PATCHv2 1/1] mtd: gpmi: make blockmark swapping optional

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



于 2014年03月26日 16:51, Lothar Waßmann 写道:
I don't see why this should not be supported on i.MX28 (i.MX23 doesn't
do byteswapping anyway, so this wouldn't change anything for i.MX23).
The partitions used by Linux need not necessarily be accessible for the
Boot ROM code (and vice versa).
But the first partition used to store the u-boot is accessible for the ROM.

Please see "Figure 12-13" in the 12.12.1.12:
"In order to preserve the BI (bad block information), flash updater or gang programmer applications need to swap Bad Block Information (BI) data to byte 0 of metadata area for every page before programming NAND Flash. ROM when loading firmware, copies back the value at metadata[0] to BI offset in page data. The following figure shows how the
factory bad block marker is preserved."

So please the imx28 should _NOT_ support this feature.

thanks
Huang Shijie



--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux