Re: [PATCH v9 resend 1/3] mmc: omap_hsmmc: Enable SDIO interrupt

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

I've tested the branch omap_hsmmc_sdio_irq_devm_cleanup on custom OMAP5 based board.
We have mwifiex connected to MMC3.

I used two approaches:

* Using dat1 line as GPIO with dynamic remuxing
* Using separate GPIO connected to dat1 with static mux settings

Both works just fine. Thanks Andreas for a great solution.

I have just one issue - how to define GPIO IRQ using DT in OMAP5 case.
As a temporary hack for testing I used a fixed GPIO number and gpio_to_irq() call in omap_hsmmc_configure_wake_irq().

OMAP5 MMC3 has the following DT entry (omap5.dtsi):

                mmc3: mmc@480ad000 {
                        compatible = "ti,omap4-hsmmc";
                        reg = <0x480ad000 0x400>;
                        interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
                        ti,hwmods = "mmc3";
                        ti,needs-special-reset;
                        dmas = <&sdma 77>, <&sdma 78>;
                        dma-names = "tx", "rx";
                };

What should be by board MMC3 setup?

Something like this?

&mmc3 {
        pinctrl-names = "default", "active", "idle";
        pinctrl-0 = <&mmc3_pins>;
        pinctrl-1 = <&mmc3_pins>;
        pinctrl-2 = <&mmc3_cirq_pin>;

        interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
                            <????????>;

        vmmc-supply = <&ldo2_reg>;
        bus-width = <4>;
        ti,non-removable;
};

I tried to specify the second interrupt as (wlsdio_data1 / gpio5_131):

<&gpio5 3 IRQ_TYPE_NONE>

but it fails:

[    2.275777] ------------[ cut here ]------------
[ 2.280604] WARNING: CPU: 1 PID: 6 at /home/lifshitz/workroot/OMAP5-eewiki/omap5-kernel/kernel/irq/manage.c:1418 request_threaded_irq+0x11c/0x12c()
[    2.294414] Modules linked in:
[ 2.297611] CPU: 1 PID: 6 Comm: kworker/u4:0 Tainted: G W 3.14.0-rc4-cm-t54-test-suit+ #30
[    2.307165] Workqueue: deferwq deferred_probe_work_func
[ 2.312629] [<c001597c>] (unwind_backtrace) from [<c001283c>] (show_stack+0x10/0x14) [ 2.320739] [<c001283c>] (show_stack) from [<c06494dc>] (dump_stack+0x70/0x88) [ 2.328294] [<c06494dc>] (dump_stack) from [<c003a520>] (warn_slowpath_common+0x70/0x88) [ 2.336761] [<c003a520>] (warn_slowpath_common) from [<c003a554>] (warn_slowpath_null+0x1c/0x24) [ 2.345940] [<c003a554>] (warn_slowpath_null) from [<c0083ce4>] (request_threaded_irq+0x11c/0x12c) [ 2.355312] [<c0083ce4>] (request_threaded_irq) from [<c0085964>] (devm_request_threaded_irq+0x5c/0x90) [ 2.361973] mmc1: host does not support reading read-only switch. assuming write-enable.
[    2.362020] mmc1: new SDHC card at address e624
[    2.362331] mmcblk1: mmc1:e624 SU08G 7.40 GiB
[    2.368152]  mmcblk1: p1 p2
[ 2.385850] [<c0085964>] (devm_request_threaded_irq) from [<c047d958>] (omap_hsmmc_configure_wake_irq+0x7c/0xfc)
[    2.393150] usb 1-2: New USB device found, idVendor=0424, idProduct=3503
[ 2.393156] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.393674] hub 1-2:1.0: USB hub found
[    2.393769] hub 1-2:1.0: 3 ports detected
[ 2.419038] [<c047d958>] (omap_hsmmc_configure_wake_irq) from [<c047ea28>] (omap_hsmmc_probe+0x5b4/0x854) [ 2.429052] [<c047ea28>] (omap_hsmmc_probe) from [<c0359ec0>] (platform_drv_probe+0x18/0x48) [ 2.437879] [<c0359ec0>] (platform_drv_probe) from [<c03580c8>] (really_probe+0x80/0x208) [ 2.446427] [<c03580c8>] (really_probe) from [<c0358360>] (driver_probe_device+0x30/0x48) [ 2.454976] [<c0358360>] (driver_probe_device) from [<c0356a58>] (bus_for_each_drv+0x5c/0x88) [ 2.463891] [<c0356a58>] (bus_for_each_drv) from [<c03582f4>] (device_attach+0x80/0xa0) [ 2.472247] [<c03582f4>] (device_attach) from [<c03577b4>] (bus_probe_device+0x84/0xa8) [ 2.480617] [<c03577b4>] (bus_probe_device) from [<c0357bb8>] (deferred_probe_work_func+0x68/0x98) [ 2.489987] [<c0357bb8>] (deferred_probe_work_func) from [<c00533c0>] (process_one_work+0x150/0x41c) [ 2.499542] [<c00533c0>] (process_one_work) from [<c0053d10>] (worker_thread+0xf4/0x31c) [ 2.508011] [<c0053d10>] (worker_thread) from [<c0059994>] (kthread+0xd4/0xe8)
[    2.512785] usb 1-3: new high-speed USB device number 3 using ehci-omap
[ 2.522474] [<c0059994>] (kthread) from [<c000e878>] (ret_from_fork+0x14/0x3c)
[    2.530023] ---[ end trace 8d60f1d3adba88d7 ]---


Regards,

Dmitry

On 03/21/2014 06:10 PM, Balaji T K wrote:
On Friday 21 March 2014 05:50 PM, Andreas Fenkart wrote:

Thanks Andreas for the patch series

I rebased against latest mmc-next, made few changes to your patch.
I have hosted your series along with devm cleanups on a branch[1] for testing
[1]
git://git.ti.com/~balajitk/ti-linux-kernel/omap-hsmmc.git omap_hsmmc_sdio_irq_devm_cleanup

Can you please test on your platform and provide feedback.

Details about the changes below.

--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux