Add Capella Microsystem cm3218x Ambient Light Sensor IIO driver.
This driver will convert raw data to lux value. Default parameters are
for reference only. It will detect ACPI table to load per-system manufacturing
parameters.
V2: Follow Jonathan Cameron's advise to separate device id.
Also, follow Peter Meerwald's advise to correct whitespace, prefix, comments, etc.
Signed-off-by: Kevin Tsai <ktsai@xxxxxxxxxxxxxxxx>
---
.../devicetree/bindings/i2c/trivial-devices.txt | 1 +
drivers/iio/light/Kconfig | 11 +
drivers/iio/light/Makefile | 1 +
drivers/iio/light/cm3218x.c | 766 +++++++++++++++++++++
4 files changed, 779 insertions(+)
create mode 100644 drivers/iio/light/cm3218x.c
diff --git a/Documentation/devicetree/bindings/i2c/trivial-devices.txt b/Documentation/devicetree/bindings/i2c/trivial-devices.txt
index 1a1ac2e..6b4428d 100644
--- a/Documentation/devicetree/bindings/i2c/trivial-devices.txt
+++ b/Documentation/devicetree/bindings/i2c/trivial-devices.txt
@@ -16,6 +16,7 @@ adt7461 +/-1C TDM Extended Temp Range I.C
at,24c08 i2c serial eeprom (24cxx)
atmel,24c02 i2c serial eeprom (24cxx)
atmel,at97sc3204t i2c trusted platform module (TPM)
+capella,cm3218 CM3218X family: Ambient Light Sensor
capella,cm32181 CM32181: Ambient Light Sensor
catalyst,24c32 i2c serial eeprom
dallas,ds1307 64 x 8, Serial, I2C Real-Time Clock
diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig
index d12b2a0..9886491 100644
--- a/drivers/iio/light/Kconfig
+++ b/drivers/iio/light/Kconfig
@@ -38,6 +38,17 @@ config CM32181
To compile this driver as a module, choose M here:
the module will be called cm32181.
+config CM3218X
+ depends on I2C
+ tristate "CM3218X driver"
+ help
+ Say Y here if you use cm32181x.
+ This option enables ambient light sensor using
+ Capella cm3218x device driver.
+
+ To compile this driver as a module, choose M here:
+ the module will be called cm3218x.
+
config CM36651
depends on I2C
tristate "CM36651 driver"
diff --git a/drivers/iio/light/Makefile b/drivers/iio/light/Makefile
index 60e35ac..a506c23 100644
--- a/drivers/iio/light/Makefile
+++ b/drivers/iio/light/Makefile
@@ -6,6 +6,7 @@
obj-$(CONFIG_ADJD_S311) += adjd_s311.o
obj-$(CONFIG_APDS9300) += apds9300.o
obj-$(CONFIG_CM32181) += cm32181.o
+obj-$(CONFIG_CM3218X) += cm3218x.o
obj-$(CONFIG_CM36651) += cm36651.o
obj-$(CONFIG_GP2AP020A00F) += gp2ap020a00f.o
obj-$(CONFIG_HID_SENSOR_ALS) += hid-sensor-als.o
diff --git a/drivers/iio/light/cm3218x.c b/drivers/iio/light/cm3218x.c
new file mode 100644
index 0000000..49f2ef9
--- /dev/null
+++ b/drivers/iio/light/cm3218x.c
@@ -0,0 +1,766 @@
+/*
+ * Copyright (C) 2014 Capella Microsystems Inc.
+ * Author: Kevin Tsai <ktsai@xxxxxxxxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2, as published
+ * by the Free Software Foundation.
+ *
+ * Special thanks Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
+ * help to add ACPI support.
+ *
+ */
+
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/mutex.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/regulator/consumer.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/events.h>
+#include <linux/init.h>
+#include <linux/acpi.h>
+
+/* Registers Address */
+#define CM3218X_REG_ADDR_CMD 0x00
+#define CM3218X_REG_ADDR_WH 0x01
+#define CM3218X_REG_ADDR_WL 0x02
+#define CM3218X_REG_ADDR_TEST 0x03
+#define CM3218X_REG_ADDR_ALS 0x04
+#define CM3218X_REG_ADDR_STATUS 0x06
+#define CM3218X_REG_ADDR_ID 0x07
+
+/* Number of Configurable Registers */
+#define CM3218X_CONF_REG_NUM 16
+
+/* CMD register */
+#define CM3218X_CMD_ALS_DISABLE BIT(0)
+#define CM3218X_CMD_ALS_INT_EN BIT(1)
+#define CM3218X_CMD_ALS_THRES_WINDOW BIT(2)
+
+#define CM3218X_CMD_ALS_PERS_SHIFT 4
+#define CM3218X_CMD_ALS_PERS_MASK (0x03 << CM3218X_CMD_ALS_PERS_SHIFT)
+#define CM3218X_CMD_ALS_PERS_DEFAULT (0x01 << CM3218X_CMD_ALS_PERS_SHIFT)
+
+#define CM3218X_CMD_ALS_IT_SHIFT 6
+#define CM3218X_CMD_ALS_IT_MASK (0x0F << CM3218X_CMD_ALS_IT_SHIFT)
+#define CM3218X_CMD_ALS_IT_DEFAULT (0x01 << CM3218X_CMD_ALS_IT_SHIFT)
+
+#define CM3218X_CMD_ALS_HS_SHIFT 11
+#define CM3218X_CMD_ALS_HS_MASK (0x01 << CM3218X_CMD_ALS_HS_SHIFT)
+#define CM3218X_CMD_ALS_HS_DEFAULT (0x00 << CM3218X_CMD_ALS_HS_SHIFT)
+
+#define CM3218X_CMD_DEFAULT (CM3218X_CMD_ALS_THRES_WINDOW |\
+ CM3218X_CMD_ALS_PERS_DEFAULT |\
+ CM3218X_CMD_ALS_IT_DEFAULT |\
+ CM3218X_CMD_ALS_HS_DEFAULT)
+
+#define CM3218X_WH_DEFAULT 0xFFFF
+#define CM3218X_WL_DEFAULT 0x0000
+
+#define CM3218X_CALIBSCALE_DEFAULT 100000
+#define CM3218X_CALIBSCALE_RESOLUTION 100000
+#define CM3218X_MLUX_PER_LUX 1000
+#define CM3218X_THRESHOLD_PERCENT 10 /* 10 percent */
+
+/* CM3218X family */
+enum {
+ cm3218,
+ cm32181,
+ cm32182
+};
+
+/* CM3218 Family */
+#define CM3218_MLUX_PER_BIT_DEFAULT 5 /* Depend on system */
+#define CM3218_MLUX_PER_BIT_BASE_IT 800000
+static const int CM3218_als_it_bits[] = {0, 1, 2, 3};
+static const int CM3218_als_it_values[] = {100000, 200000, 400000, 800000};
+
+/* CM32181 Family */
+#define CM32181_MLUX_PER_BIT_DEFAULT 5
+#define CM32181_MLUX_PER_BIT_BASE_IT 800000
+static const int CM32181_als_it_bits[] = {12, 8, 0, 1, 2, 3};
+static const int CM32181_als_it_values[] = {
+ 25000, 50000, 100000, 200000, 400000, 800000};
+
+struct cm3218x_als_info {
+ u32 id;
+ int int_type;
+#define CM3218X_INT_TYPE_SMBUS 0
+#define CM3218X_INT_TYPE_I2C 1
+ int regs_bmp;
+ int calibscale;
+ int mlux_per_bit;
+ int mlux_per_bit_base_it;
+ const int *als_it_bits;
+ const int *als_it_values;
+ int num_als_it;
+ int als_raw;
+};
+
+static struct cm3218x_als_info cm3218_info = {
+ 3218, CM3218X_INT_TYPE_SMBUS, 0x0F, CM3218X_CALIBSCALE_DEFAULT,
+ CM3218_MLUX_PER_BIT_DEFAULT, CM3218_MLUX_PER_BIT_BASE_IT,
+ CM3218_als_it_bits, CM3218_als_it_values,
+ ARRAY_SIZE(CM3218_als_it_bits), 0};
+
+static struct cm3218x_als_info cm32181_info = {
+ 32181, CM3218X_INT_TYPE_I2C, 0x0F, CM3218X_CALIBSCALE_DEFAULT,
+ CM32181_MLUX_PER_BIT_DEFAULT, CM32181_MLUX_PER_BIT_BASE_IT,
+ CM32181_als_it_bits, CM32181_als_it_values,
+ ARRAY_SIZE(CM32181_als_it_bits), 0};
+
+static struct cm3218x_als_info cm32182_info = {
+ 32182, CM3218X_INT_TYPE_I2C, 0x0F, CM3218X_CALIBSCALE_DEFAULT,
+ CM32181_MLUX_PER_BIT_DEFAULT, CM32181_MLUX_PER_BIT_BASE_IT,
+ CM32181_als_it_bits, CM32181_als_it_values,
+ ARRAY_SIZE(CM32181_als_it_bits), 0};
+
+struct cm3218x_chip {
+ struct i2c_client *client;
+ struct mutex lock;
+ u16 conf_regs[CM3218X_CONF_REG_NUM];
+ struct cm3218x_als_info *als_info;
+};
+
+static int cm3218x_get_lux(struct cm3218x_chip *chip);
+static int cm3218x_threshold_update(struct cm3218x_chip *chip, int percent);
+static int cm3218x_read_als_it(struct cm3218x_chip *chip, int *val2);
+
+/**
+ * cm3218x_read_ara() - Read ARA register
+ * @chip: pointer of struct cm3218x.
+ *
+ * Following SMBus protocol, ARA register is available only when interrupt
+ * event happened. Read it to clean interrupt event. Otherwise, other
+ * device address/registers will be blocked during interrupt event.
+ *
+ * Return: 0 for success; otherwise for error code.
+ */
+static int cm3218x_read_ara(struct cm3218x_chip *chip)
+{
+ struct i2c_client *client = chip->client;
+ int status;
+ unsigned short addr;
+
+ addr = client->addr;
+ client->addr = 0x0C;
+ status = i2c_smbus_read_byte(client);
+ client->addr = addr;
+
+ if (status < 0)
+ return -ENODEV;
+
+ return status;
+}
+
+/**
+ * cm3218x_interrupt_config() - Enable/Disable CM3218X interrupt
+ * @chip: pointer of struct cm3218x.
+ * @enable: 0 to disable; otherwise to enable
+ *
+ * Config CM3218X interrupt control bit.
+ *
+ * Return: 0 for success; otherwise for error code.
+ */
+static int cm3218x_interrupt_config(struct cm3218x_chip *chip, int enable)
+{
+ struct i2c_client *client = chip->client;
+ struct cm3218x_als_info *als_info = chip->als_info;
+ int status;
+
+ if (!als_info)
+ return -ENODEV;
+
+ /* Force to clean interrupt */
+ if (als_info->int_type == CM3218X_INT_TYPE_I2C) {
+ status = i2c_smbus_read_word_data(client,
+ CM3218X_REG_ADDR_STATUS);
+ if (status < 0)
+ als_info->int_type = CM3218X_INT_TYPE_SMBUS;
+ }
+ if (als_info->int_type == CM3218X_INT_TYPE_SMBUS)
+ cm3218x_read_ara(chip);
+
+ if (enable)
+ chip->conf_regs[CM3218X_REG_ADDR_CMD] |=
+ CM3218X_CMD_ALS_INT_EN;
+ else
+ chip->conf_regs[CM3218X_REG_ADDR_CMD] &=
+ ~CM3218X_CMD_ALS_INT_EN;
+
+ status = i2c_smbus_write_word_data(client, CM3218X_REG_ADDR_CMD,
+ chip->conf_regs[CM3218X_REG_ADDR_CMD]);
+
+ if (status < 0)
+ return -ENODEV;
+
+ return status;
+}
+
+/**
+ * cm3218x_acpi_get_cpm_info() - Get CPM object from ACPI
+ * @client pointer of struct i2c_client.
+ * @obj_name pointer of ACPI object name.
+ * @count maximum size of return array.
+ * @vals pointer of array for return elements.
+ *
+ * Convert ACPI CPM table to array. Special thanks Srinivas Pandruvada's
+ * help to implement this routine.
+ *
+ * Return: -ENODEV for fail. Otherwise is number of elements.
+ */
+static int cm3218x_acpi_get_cpm_info(struct i2c_client *client, char *obj_name,
+ int count, u64 *vals)
+{
+ acpi_handle handle;
+ struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL};
+ int i;
+ acpi_status status;
+ union acpi_object *cpm;
+
+ handle = ACPI_HANDLE(&client->dev);
+ if (!handle)
+ return -ENODEV;
+
+ status = acpi_evaluate_object(handle, obj_name, NULL, &buffer);
+ if (ACPI_FAILURE(status)) {
+ dev_err(&client->dev, "object %s not found\n", obj_name);
+ return -ENODEV;
+ }
+
+ cpm = buffer.pointer;
+ for (i = 0; i < cpm->package.count && i < count; ++i) {
+ union acpi_object *elem;
+ elem = &(cpm->package.elements[i]);
+ vals[i] = elem->integer.value;
+ }
+
+ kfree(buffer.pointer);
+
+ return cpm->package.count;
+}
+
+/**
+ * cm3218x_reg_init() - Initialize CM3218X registers
+ * @chip: pointer of struct cm3218x.
+ *
+ * Initialize CM3218X ambient light sensor register to default values.
+ *
+ Return: 0 for success; otherwise for error code.
+ */
+static int cm3218x_reg_init(struct cm3218x_chip *chip)
+{
+ struct i2c_client *client = chip->client;
+ int i;
+ s32 ret;
+ int cpm_elem_count;
+ u64 cpm_elems[20];
+ struct cm3218x_als_info *als_info;
+
+ /* Default device */
+ chip->als_info = &cm3218_info;
+ chip->conf_regs[CM3218X_REG_ADDR_CMD] = CM3218X_CMD_DEFAULT;
+ chip->conf_regs[CM3218X_REG_ADDR_WH] = CM3218X_WH_DEFAULT;
+ chip->conf_regs[CM3218X_REG_ADDR_WL] = CM3218X_WL_DEFAULT;
+
+ /* Disable interrupt */
+ cm3218x_interrupt_config(chip, 0);
+
+ /* Disable Test Mode */
+ i2c_smbus_write_word_data(client, CM3218X_REG_ADDR_TEST, 0x0000);
+
+ /* Disable device */
+ i2c_smbus_write_word_data(client, CM3218X_REG_ADDR_CMD,
+ CM3218X_CMD_ALS_DISABLE);
+
+ /* Identify device */
+ ret = i2c_smbus_read_word_data(client, CM3218X_REG_ADDR_ID);
+ if (ret < 0)
+ return ret;
+ switch (ret & 0xFF) {
+ case 0x18:
+ als_info = chip->als_info = &cm3218_info;
+ if (ret & 0x0800)
+ als_info->int_type = CM3218X_INT_TYPE_I2C;
+ else
+ als_info->int_type = CM3218X_INT_TYPE_SMBUS;
+ break;
+ case 0x81:
+ als_info = chip->als_info = &cm32181_info;
+ break;
+ case 0x82:
+ als_info = chip->als_info = &cm32182_info;
+ break;
+ default:
+ return -ENODEV;
+ }
+
+ if (ACPI_HANDLE(&client->dev)) {
+ /* Load from ACPI */
+ cpm_elem_count = cm3218x_acpi_get_cpm_info(client, "CPM0",
+ ARRAY_SIZE(cpm_elems),
+ cpm_elems);
+ if (cpm_elem_count > 0) {
+ int header_num = 3;
+ int reg_num = cpm_elem_count - header_num;
+
+ als_info->regs_bmp = cpm_elems[2];
+ for (i = 0; i < reg_num; i++)
+ if (als_info->regs_bmp & (1<<i))
+ chip->conf_regs[i] =
+ cpm_elems[header_num+i];
+ }
+
+ cpm_elem_count = cm3218x_acpi_get_cpm_info(client, "CPM1",
+ ARRAY_SIZE(cpm_elems),
+ cpm_elems);
+ if (cpm_elem_count > 0) {
+ als_info->mlux_per_bit = (int)cpm_elems[0] / 100;
+ als_info->calibscale = (int)cpm_elems[1];
+ }
+ }
+
+ /* Force to disable interrupt */
+ chip->conf_regs[CM3218X_REG_ADDR_CMD] &= ~CM3218X_CMD_ALS_INT_EN;
+
+ /* Initialize registers */
+ for (i = 0; i < CM3218X_CONF_REG_NUM; i++) {
+ if (als_info->regs_bmp & (1<<i)) {
+ ret = i2c_smbus_write_word_data(client, i,
+ chip->conf_regs[i]);
+ if (ret < 0)
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+/**
+ * cm3218x_read_als_it() - Get sensor integration time (ms)
+ * @chip: pointer of struct cm3218x
+ * @val2: pointer of int to load the als_it value.
+ *
+ * Report the current integartion time in milliseconds.
+ *
+ * Return: IIO_VAL_INT_PLUS_MICRO for success, otherwise -EINVAL.
+ */
+static int cm3218x_read_als_it(struct cm3218x_chip *chip, int *val2)
+{
+ struct cm3218x_als_info *als_info = chip->als_info;
+ u16 als_it;
+ int i;
+
+ als_it = chip->conf_regs[CM3218X_REG_ADDR_CMD];
+ als_it &= CM3218X_CMD_ALS_IT_MASK;
+ als_it >>= CM3218X_CMD_ALS_IT_SHIFT;
+ for (i = 0; i < als_info->num_als_it; i++) {
+ if (als_it == als_info->als_it_bits[i]) {
+ *val2 = als_info->als_it_values[i];
+ return IIO_VAL_INT_PLUS_MICRO;
+ }
+ }
+
+ return -EINVAL;
+}
+
+/**
+ * cm3218x_write_als_it() - Write sensor integration time
+ * @chip: pointer of struct cm3218x.
+ * @val: integration time in milliseconds.
+ *
+ * Convert integration time (ms) to sensor value.
+ *
+ * Return: i2c_smbus_write_word_data command return value.
+ */
+static int cm3218x_write_als_it(struct cm3218x_chip *chip, int val)
+{
+ struct i2c_client *client = chip->client;
+ struct cm3218x_als_info *als_info = chip->als_info;
+ u16 als_it;
+ int ret, i;
+
+ for (i = 0; i < als_info->num_als_it; i++)
+ if (val <= als_info->als_it_values[i])
+ break;
+ if (i >= als_info->num_als_it)
+ i = als_info->num_als_it - 1;
+
+ als_it = als_info->als_it_bits[i];
+ als_it <<= CM3218X_CMD_ALS_IT_SHIFT;
+
+ mutex_lock(&chip->lock);
+ chip->conf_regs[CM3218X_REG_ADDR_CMD] &=
+ ~CM3218X_CMD_ALS_IT_MASK;
+ chip->conf_regs[CM3218X_REG_ADDR_CMD] |=
+ als_it;
+ ret = i2c_smbus_write_word_data(client, CM3218X_REG_ADDR_CMD,
+ chip->conf_regs[CM3218X_REG_ADDR_CMD]);
+ mutex_unlock(&chip->lock);
+
+ return ret;
+}
+
+/**
+ * cm3218x_get_lux() - report current lux value
+ * @chip: pointer of struct cm3218x.
+ *
+ * Convert sensor raw data to lux. It depends on integration
+ * time and calibscale variable.
+ *
+ * Return: Positive value is lux, otherwise is error code.
+ */
+static int cm3218x_get_lux(struct cm3218x_chip *chip)
+{
+ struct i2c_client *client = chip->client;
+ struct cm3218x_als_info *als_info = chip->als_info;
+ int ret;
+ int als_it;
+ u64 tmp;
+
+ /* Calculate mlux per bit based on als_it */
+ ret = cm3218x_read_als_it(chip, &als_it);
+ if (ret < 0)
+ return -EINVAL;
+ tmp = (__force u64)als_info->mlux_per_bit;
+ tmp *= als_info->mlux_per_bit_base_it;
+ tmp = div_u64(tmp, als_it);
+
+ /* Get als_raw */
+ if (!(chip->conf_regs[CM3218X_REG_ADDR_CMD] & CM3218X_CMD_ALS_INT_EN))
+ als_info->als_raw = i2c_smbus_read_word_data(
+ client,
+ CM3218X_REG_ADDR_ALS);
+ if (als_info->als_raw < 0)
+ return als_info->als_raw;
+
+ tmp *= als_info->als_raw;
+ tmp *= als_info->calibscale;
+ tmp = div_u64(tmp, CM3218X_CALIBSCALE_RESOLUTION);
+ tmp = div_u64(tmp, CM3218X_MLUX_PER_LUX);
+
+ if (tmp > 0xFFFF)
+ tmp = 0xFFFF;
+
+ return (int)tmp;
+}
+
+static int cm3218x_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int *val, int *val2, long mask)
+{
+ struct cm3218x_chip *chip = iio_priv(indio_dev);
+ struct cm3218x_als_info *als_info = chip->als_info;
+ int ret;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_PROCESSED:
+ ret = cm3218x_get_lux(chip);
+ if (ret < 0)
+ return ret;
+ *val = ret;
+ return IIO_VAL_INT;
+ case IIO_CHAN_INFO_CALIBSCALE:
+ *val = als_info->calibscale;
+ return IIO_VAL_INT;
+ case IIO_CHAN_INFO_INT_TIME:
+ *val = 0;
+ ret = cm3218x_read_als_it(chip, val2);
+ return ret;
+ }
+
+ return -EINVAL;
+}
+
+static int cm3218x_write_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int val, int val2, long mask)
+{
+ struct cm3218x_chip *chip = iio_priv(indio_dev);
+ struct cm3218x_als_info *als_info = chip->als_info;
+ long ms;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_CALIBSCALE:
+ als_info->calibscale = val;
+ return val;
+ case IIO_CHAN_INFO_INT_TIME:
+ ms = val * 1000000 + val2;
+ return cm3218x_write_als_it(chip, (int)ms);
+ }
+
+ return -EINVAL;
+}
+
+/**
+ * cm3218x_get_it_available() - Get available ALS IT value
+ * @dev: pointer of struct device.
+ * @attr: pointer of struct device_attribute.
+ * @buf: pointer of return string buffer.
+ *
+ * Display the available integration time in milliseconds.
+ *
+ * Return: string length.
+ */
+static ssize_t cm3218x_get_it_available(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct cm3218x_chip *chip = iio_priv(dev_to_iio_dev(dev));
+ struct cm3218x_als_info *als_info = chip->als_info;
+ int i, len;
+
+ for (i = 0, len = 0; i < als_info->num_als_it; i++)
+ len += scnprintf(buf + len, PAGE_SIZE - len, "%u.%06u ",
+ als_info->als_it_values[i]/1000000,
+ als_info->als_it_values[i]%1000000);
+ return len + scnprintf(buf + len, PAGE_SIZE - len, "\n");
+}
+
+/**
+ * cm3218x_threshold_update() - Update the threshold registers.
+ * @chip: pointer of struct cm3218x_chip.
+ * @percent: +/- percent.
+ *
+ * Based on the current ALS value, tupdate the hi and low threshold registers.
+ *
+ * Return: 0 for success; otherwise for error code.
+ */
+static int cm3218x_threshold_update(struct cm3218x_chip *chip, int percent)
+{
+ struct i2c_client *client = chip->client;
+ struct cm3218x_als_info *als_info = chip->als_info;
+ int ret;
+ int wh, wl;
+
+ ret = als_info->als_raw = i2c_smbus_read_word_data(client,
+ CM3218X_REG_ADDR_ALS);
+ if (ret < 0)
+ return ret;
+
+ wh = wl = ret;
+ ret *= percent;
+ ret /= 100;
+ if (ret < 1)
+ ret = 1;
+ wh += ret;
+ wl -= ret;
+ if (wh > 65535)
+ wh = 65535;
+ if (wl < 0)
+ wl = 0;
+
+ chip->conf_regs[CM3218X_REG_ADDR_WH] = wh;
+ ret = i2c_smbus_write_word_data(
+ client,
+ CM3218X_REG_ADDR_WH,
+ chip->conf_regs[CM3218X_REG_ADDR_WH]);
+ if (ret < 0)
+ return ret;
+
+ chip->conf_regs[CM3218X_REG_ADDR_WL] = wl;
+ ret = i2c_smbus_write_word_data(
+ client,
+ CM3218X_REG_ADDR_WL,
+ chip->conf_regs[CM3218X_REG_ADDR_WL]);
+
+ return ret;
+}
+
+/**
+ * cm3218x_event_handler() - Interrupt handling routine.
+ * @irq: irq number.
+ * @private: pointer of void.
+ *
+ * Clean interrupt and reset threshold registers.
+ *
+ * Return: IRQ_HANDLED.
+ */
+static irqreturn_t cm3218x_event_handler(int irq, void *private)
+{
+ struct iio_dev *dev_info = private;
+ struct cm3218x_chip *chip = iio_priv(dev_info);
+ int ret;
+
+ mutex_lock(&chip->lock);
+
+ /* Disable interrupt */
+ ret = cm3218x_interrupt_config(chip, 0);
+ if (ret < 0)
+ goto error_handler_unlock;
+
+ /* Update Hi/Lo windows */
+ ret = cm3218x_threshold_update(chip, CM3218X_THRESHOLD_PERCENT);
+ if (ret < 0)
+ goto error_handler_unlock;
+
+ /* Enable interrupt */
+ ret = cm3218x_interrupt_config(chip, 1);
+ if (ret < 0)
+ goto error_handler_unlock;
+
+error_handler_unlock:
+ mutex_unlock(&chip->lock);
+ return IRQ_HANDLED;
+}
+
+static const struct iio_chan_spec cm3218x_channels[] = {
+ {
+ .type = IIO_LIGHT,
+ .info_mask_separate =
+ BIT(IIO_CHAN_INFO_PROCESSED) |
+ BIT(IIO_CHAN_INFO_CALIBSCALE) |
+ BIT(IIO_CHAN_INFO_INT_TIME),
+ }
+};
+
+static IIO_DEVICE_ATTR(in_illuminance_integration_time_available,
+ S_IRUGO, cm3218x_get_it_available, NULL, 0);
+
+static struct attribute *cm3218x_attributes[] = {
+ &iio_dev_attr_in_illuminance_integration_time_available.dev_attr.attr,
+ NULL,
+};
+
+static const struct attribute_group cm3218x_attribute_group = {
+ .attrs = cm3218x_attributes
+};
+
+static const struct iio_info cm3218x_info = {
+ .driver_module = THIS_MODULE,
+ .read_raw = &cm3218x_read_raw,
+ .write_raw = &cm3218x_write_raw,
+ .attrs = &cm3218x_attribute_group,
+};
+
+static int cm3218x_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct cm3218x_chip *chip;
+ struct iio_dev *indio_dev;
+ int ret;
+
+ indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*chip));
+ if (!indio_dev) {
+ dev_err(&client->dev, "devm_iio_device_alloc failed\n");
+ return -ENOMEM;
+ }
+
+ chip = iio_priv(indio_dev);
+ i2c_set_clientdata(client, indio_dev);
+ chip->client = client;
+
+ mutex_init(&chip->lock);
+ indio_dev->dev.parent = &client->dev;
+ indio_dev->channels = cm3218x_channels;
+ indio_dev->num_channels = ARRAY_SIZE(cm3218x_channels);
+ indio_dev->info = &cm3218x_info;
+ if (id && id->name)
+ indio_dev->name = id->name;
+ else
+ indio_dev->name = (char *)dev_name(&client->dev);
+ indio_dev->modes = INDIO_DIRECT_MODE;
+
+ ret = cm3218x_reg_init(chip);
+ if (ret) {
+ dev_err(&client->dev,
+ "%s: register init failed\n",
+ __func__);
+ return ret;
+ }
+
+ if (client->irq) {
+ ret = request_threaded_irq(client->irq,
+ NULL,
+ cm3218x_event_handler,
+ IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+ "cm3218x_event",
+ indio_dev);
+
+ if (ret < 0) {
+ dev_err(&client->dev, "irq request error %d\n",
+ -ret);
+ goto error_disable_int;
+ }
+ }
+
+ ret = iio_device_register(indio_dev);
+ if (ret < 0) {
+ dev_err(&client->dev,
+ "%s: regist device failed\n",
+ __func__);
+ goto error_free_irq;
+ }
+
+ if (client->irq) {
+ ret = cm3218x_threshold_update(chip, CM3218X_THRESHOLD_PERCENT);
+ if (ret < 0)
+ goto error_free_irq;
+
+ ret = cm3218x_interrupt_config(chip, 1);
+ if (ret < 0)
+ goto error_free_irq;
+ }
+
+ return 0;
+
+error_free_irq:
+ free_irq(client->irq, indio_dev);
+error_disable_int:
+ cm3218x_interrupt_config(chip, 0);
+ return ret;
+}
+
+static int cm3218x_remove(struct i2c_client *client)
+{
+ struct iio_dev *indio_dev = i2c_get_clientdata(client);
+ struct cm3218x_chip *chip = iio_priv(indio_dev);
+
+ cm3218x_interrupt_config(chip, 0);
+ if (client->irq)
+ free_irq(client->irq, indio_dev);
+ iio_device_unregister(indio_dev);
+ return 0;
+}
+
+static const struct i2c_device_id cm3218x_id[] = {
+ { "cm3218", cm3218},
+ { "cm32181", cm32181},
+ { "cm32182", cm32182},
+ { }
+};
+
+MODULE_DEVICE_TABLE(i2c, cm3218x_id);
+
+static const struct of_device_id cm3218x_of_match[] = {
+ { .compatible = "capella,cm3218" },
+ { }
+};
+
+static const struct acpi_device_id cm3218x_acpi_match[] = {
+ { "CPLM3218", 0},
+ {},
+};
+
+MODULE_DEVICE_TABLE(acpi, cm3218x_acpi_match);
+
+static struct i2c_driver cm3218x_driver = {
+ .driver = {
+ .name = "cm3218x",
+ .acpi_match_table = ACPI_PTR(cm3218x_acpi_match),
+ .of_match_table = of_match_ptr(cm3218x_of_match),
+ .owner = THIS_MODULE,
+ },
+ .id_table = cm3218x_id,
+ .probe = cm3218x_probe,
+ .remove = cm3218x_remove,
+};
+
+module_i2c_driver(cm3218x_driver);
+
+MODULE_AUTHOR("Kevin Tsai <ktsai@xxxxxxxxxxxxxxxx>");
+MODULE_DESCRIPTION("CM3218X ambient light sensor driver");
+MODULE_LICENSE("GPL");
--
1.8.3.1
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
