Re: [PATCHv2 3/8] devfreq: exynos4: Add ppmu's clock control and code clean about regulator control

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Chanwoo,

On 17.03.2014 06:59, Chanwoo Choi wrote:
Hi Tomasz,

On 03/17/2014 11:51 AM, Chanwoo Choi wrote:
Hi Tomasz,

On 03/15/2014 02:42 AM, Tomasz Figa wrote:
Hi Chanwoo,

On 13.03.2014 09:17, Chanwoo Choi wrote:
There are not the clock controller of ppmudmc0/1. This patch control the clock
of ppmudmc0/1 which is used for monitoring memory bus utilization.

Also, this patch code clean about regulator control and free resource
when calling exit/remove function.

For example,
busfreq@106A0000 {
     compatible = "samsung,exynos4x12-busfreq";

     /* Clock for PPMUDMC0/1 */
     clocks = <&clock CLK_PPMUDMC0>, <&clock CLK_PPMUDMC1>;
     clock-names = "ppmudmc0", "ppmudmc1";

     /* Regulator for MIF/INT block */
     vdd_mif-supply = <&buck1_reg>;
     vdd_int-supply = <&buck3_reg>;
};

Signed-off-by: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>

I modify this patch according your comment as following:

Best Regards,
Chanwoo Choi

From c8f2fbc4c1166ec02fb2ad46164bc7ed9118721b Mon Sep 17 00:00:00 2001
From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
Date: Fri, 14 Mar 2014 12:05:54 +0900
Subject: [PATCH] devfreq: exynos4: Add ppmu's clock control and code clean
  about regulator control

There are not the clock controller of ppmudmc0/1. This patch control the clock
of ppmudmc0/1 which is used for monitoring memory bus utilization.

Also, this patch code clean about regulator control and free resource
when calling exit/remove function.

For example,
busfreq@106A0000 {
	compatible = "samsung,exynos4x12-busfreq";

	/* Clock for PPMUDMC0/1 */
	clocks = <&clock CLK_PPMUDMC0>, <&clock CLK_PPMUDMC1>;
	clock-names = "ppmudmc0", "ppmudmc1";

	/* Regulator for MIF/INT block */
	vdd_mif-supply = <&buck1_reg>;
	vdd_int-supply = <&buck3_reg>;
};

Signed-off-by: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
---
  drivers/devfreq/exynos/exynos4_bus.c | 97 +++++++++++++++++++++++++++++++-----
  1 file changed, 84 insertions(+), 13 deletions(-)

diff --git a/drivers/devfreq/exynos/exynos4_bus.c b/drivers/devfreq/exynos/exynos4_bus.c
index 4c630fb..3956bcc 100644
--- a/drivers/devfreq/exynos/exynos4_bus.c
+++ b/drivers/devfreq/exynos/exynos4_bus.c
@@ -62,6 +62,11 @@ enum exynos_ppmu_idx {
  	PPMU_END,
  };

+static const char *exynos_ppmu_clk_name[] = {
+	[PPMU_DMC0]	= "ppmudmc0",
+	[PPMU_DMC1]	= "ppmudmc1",
+};
+
  #define EX4210_LV_MAX	LV_2
  #define EX4x12_LV_MAX	LV_4
  #define EX4210_LV_NUM	(LV_2 + 1)
@@ -86,6 +91,7 @@ struct busfreq_data {
  	struct regulator *vdd_mif; /* Exynos4412/4212 only */
  	struct busfreq_opp_info curr_oppinfo;
  	struct exynos_ppmu ppmu[PPMU_END];
+	struct clk *clk_ppmu[PPMU_END];

  	struct notifier_block pm_notifier;
  	struct mutex lock;
@@ -724,6 +730,17 @@ static void exynos4_bus_exit(struct device *dev)
  	struct busfreq_data *data = dev_get_drvdata(dev);
  	int i;

+	/*
+	 * Un-map memory map and disable regulator/clocks
+	 * to prevent power leakage.
+	 */
+	regulator_disable(data->vdd_int);
+	if (data->type == TYPE_BUSF_EXYNOS4x12)
+		regulator_disable(data->vdd_mif);
+
+	for (i = 0; i < PPMU_END; i++)
+		clk_disable_unprepare(data->clk_ppmu[i]);
+
  	for (i = 0; i < PPMU_END; i++)
  		iounmap(data->ppmu[i].hw_base);
  }
@@ -989,6 +1006,7 @@ static int exynos4_busfreq_parse_dt(struct busfreq_data *data)
  {
  	struct device *dev = data->dev;
  	struct device_node *np = dev->of_node;
+	const char **clk_name = exynos_ppmu_clk_name;
  	int i, ret = 0;

  	if (!np) {
@@ -1006,8 +1024,67 @@ static int exynos4_busfreq_parse_dt(struct busfreq_data *data)
  		}
  	}

+	for (i = 0; i < PPMU_END; i++) {
+		data->clk_ppmu[i] = devm_clk_get(dev, clk_name[i]);
+		if (IS_ERR(data->clk_ppmu[i])) {
+			dev_warn(dev, "Failed to get %s clock\n", clk_name[i]);

dev_err() since this is an error.

+			goto err_clocks;
+		}
+
+		ret = clk_prepare_enable(data->clk_ppmu[i]);
+		if (ret < 0) {
+			dev_warn(dev, "Failed to enable %s clock\n", clk_name[i]);

Ditto.

+			data->clk_ppmu[i] = NULL;
+			goto err_clocks;
+		}
+	}
+
+	/* Get regulator to control voltage of int block */
+	data->vdd_int = devm_regulator_get(dev, "vdd_int");
+	if (IS_ERR(data->vdd_int)) {
+		dev_err(dev, "Failed to get the regulator of vdd_int\n");
+		ret = PTR_ERR(data->vdd_int);
+		goto err_clocks;
+	}
+	ret = regulator_enable(data->vdd_int);
+	if (ret < 0) {
+		dev_err(dev, "Failed to enable regulator of vdd_int\n");
+		goto err_clocks;
+	}
+
+	switch (data->type) {
+	case TYPE_BUSF_EXYNOS4210:
+		break;

Do you need to use switch here? Wouldn't a simple if (data->type == TYPE_BUSF_EXYNOS4x12) work as well, resulting with simpler code?

However I would expect this code to be completely removed, after defining DT bindings in a way allowing you to completely drop such SoC type enums. Please see my other reply for explanation of Exynos power plane DT bindings concept.

+	case TYPE_BUSF_EXYNOS4x12:
+		/* Get regulator to control voltage of mif blk if Exynos4x12 */
+		data->vdd_mif = devm_regulator_get(dev, "vdd_mif");
+		if (IS_ERR(data->vdd_mif)) {
+			dev_err(dev, "Failed to get the regulator vdd_mif\n");
+			ret = PTR_ERR(data->vdd_mif);
+			goto err_regulator;
+		}
+		ret = regulator_enable(data->vdd_mif);
+		if (ret < 0) {
+			dev_err(dev, "Failed to enable regulator of vdd_mif\n");
+			goto err_regulator;
+		}
+		break;
+	default:
+		dev_err(dev, "Unknown device type : %d\n", data->type);
+		return -EINVAL;
+	};
+
  	return 0;

+err_regulator:
+	regulator_disable(data->vdd_int);
+err_clocks:
+	for (i = 0; i < PPMU_END; i++) {
+		if (IS_ERR(data->clk_ppmu[i]))
+			continue;
+		else

if (!IS_ERR(...))

+			clk_disable_unprepare(data->clk_ppmu[i]);
+	}

Otherwise looks good.

Best regards,
Tomasz
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux