On Mon, 2014-03-10 at 12:58PM +0100, Michal Simek wrote: > On 03/10/2014 11:56 AM, Mark Rutland wrote: > > On Sun, Mar 09, 2014 at 02:57:16AM +0000, Punnaiah Choudary Kalluri wrote: > >> Added EDAC support for reporting the ecc errors of zynq ddr controller. > >> The ddr ecc controller corrects single bit errors and detects double bit > >> errors > >> > >> Signed-off-by: Punnaiah Choudary Kalluri <punnaia@xxxxxxxxxx> > >> --- > >> .../devicetree/bindings/edac/zynq_edac.txt | 18 + > >> drivers/edac/Kconfig | 7 + > >> drivers/edac/Makefile | 1 + > >> drivers/edac/zynq_edac.c | 613 ++++++++++++++++++++ > >> 4 files changed, 639 insertions(+), 0 deletions(-) > >> create mode 100644 Documentation/devicetree/bindings/edac/zynq_edac.txt > >> create mode 100644 drivers/edac/zynq_edac.c > >> > >> diff --git a/Documentation/devicetree/bindings/edac/zynq_edac.txt b/Documentation/devicetree/bindings/edac/zynq_edac.txt > >> new file mode 100644 > >> index 0000000..c21ff83 > >> --- /dev/null > >> +++ b/Documentation/devicetree/bindings/edac/zynq_edac.txt > >> @@ -0,0 +1,18 @@ > >> +Zynq EDAC driver, it does reports the DDR ECC single bit errors that are > >> +corrected and double bit ecc errors that are detected by the DDR ECC controller. > >> +ECC support for DDR is available in half-bus width(16 bit) configuration only. > >> + > >> +Required properties: > >> +- compatible: Should be "xlnx,ps7-ddrc" or "xlnx,ps7-ddrc-1.00.a" > > > > Is this an or or a xor? > > Compatible string should be just xlnx,zynq-ddrc-1.00.a. > Nothing with ps7. Isn't this vendor IP? IMHO, this should be something completely different. Or if you want some Zynq-specific compat string it should refer to an actual version string associated with Zynq. 1.00.a is not, AFAIK. Sören -- To unsubscribe from this list: send the line "unsubscribe linux-doc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
