Re: [PATCH v7 1/4] mmc: omap_hsmmc: Enable SDIO IRQ.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



* Balaji T K <balajitk@xxxxxx> [140307 07:15]:
> On Wednesday 05 March 2014 02:00 PM, Andreas Fenkart wrote:
> >2014-02-28 18:04 GMT+01:00 Balaji T K <balajitk@xxxxxx>:
> >>
> >>I tried testing this patch series on am335x, I see throughput in the
> >>range of KBs. Will give another try with Tony's version.
> >KB sounds really bad, even with polling I have > 5MBytes/s.
> >
> >Could you pls paste
> ># cat /sys/kernel/debug/mmc0/regs
> >
> Hi,
> 
> Find below debug reg dump
> 
> mmc0:
> sdio irq        enabled
> pinmux config   sdio
> ctx_loss:       1
> 
> regs:
> CON:            0x00000600
> PSTATE:         0x01f70000
> HCTL:           0x00000d06
> SYSCTL:         0x000d0087
> IE:             0x00000100
> ISE:            0x00000100
> CAPA:           0x06e10080

Is this with wl12xx? If so, wl12xx driver is missing calls to
sdio_claim_irq() and sdio_release_irq() so it probably won't
behave properly with the SDIO interrupt until those are added.

Regards,

Tony
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux