On Tue, Mar 4, 2014 at 1:27 PM, Georgi Djakov <gdjakov@xxxxxxxxxx> wrote:
> This patch adds the device-tree binding documentation for
> Qualcomm SDHCI driver. It contains the differences between
> the core properties in mmc.txt and the properties used by
> the sdhci-msm driver.
>
> Signed-off-by: Georgi Djakov <gdjakov@xxxxxxxxxx>
> ---
> .../devicetree/bindings/mmc/sdhci-msm.txt | 63 ++++++++++++++++++++
> 1 file changed, 63 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/mmc/sdhci-msm.txt
>
> diff --git a/Documentation/devicetree/bindings/mmc/sdhci-msm.txt b/Documentation/devicetree/bindings/mmc/sdhci-msm.txt
> new file mode 100644
> index 0000000..c635c53
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mmc/sdhci-msm.txt
> @@ -0,0 +1,63 @@
> +* Qualcomm SDHCI controller (sdhci-msm)
> +
> +This file documents differences between the core properties in mmc.txt
> +and the properties used by the sdhci-msm driver.
> +
> +Required properties:
> +- compatible: Should contain "qcom,sdhci-msm-v4".
> +- reg: Base address and length of the register set listed in reg-names.
> +- reg-names: Should contain the following:
> + "hc_mem" - Host controller register map
> + "core_mem" - SD Core register map
reg-names should not be required and the order specified by the binding.
> +- interrupts: Should contain an interrupt-specifiers for the interrupts listed in interrupt-names.
> +- interrupt-names: Should contain the following:
> + "hc_irq" - Host controller interrupt
> + "pwr_irq" - PMIC interrupt
Same for interrupt-names.
> +- vdd-supply: Phandle to the regulator for the vdd (core voltage) supply.
> +- vdd-io-supply: Phandle to the regulator for the vdd-io (i/o voltage) supply.
> +- pinctrl-names: Should contain only one value - "default".
> +- pinctrl-0: Should specify pin control groups used for this controller.
> +- clocks: A list of phandle + clock-specifier pairs for the clocks listed in clock-names.
> +- clock-names: Should contain the following:
> + "iface" - Main peripheral bus clock (PCLK/HCLK - AHB Bus clock) (required)
> + "core" - SDC MMC clock (MCLK) (required)
> + "bus" - SDCC bus voter clock (optional)
> +
> +Example:
> +
> + sdhc_1: sdhci@f9824900 {
> + compatible = "qcom,sdhci-msm-v4";
> + reg = <0xf9824900 0x11c>, <0xf9824000 0x800>;
Are there cases where these are really in a different 4KB range? If
not, this should just be 1 range.
> + reg-names = "hc_mem", "core_mem";
> + interrupts = <0 123 0>, <0 138 0>;
> + interrupt-names = "hc_irq", "pwr_irq";
> + bus-width = <8>;
> + non-removable;
> +
> + vdd-supply = <&pm8941_l20>;
> + vdd-io-supply = <&pm8941_s3>;
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&sdc1_clk &sdc1_cmd &sdc1_data>;
> +
> + clocks = <&gcc GCC_SDCC1_APPS_CLK>, <&gcc GCC_SDCC1_AHB_CLK>;
> + clock-names = "core", "iface";
> + };
> +
> + sdhc_2: sdhci@f98a4900 {
> + compatible = "qcom,sdhci-msm-v4";
> + reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
> + reg-names = "hc_mem", "core_mem";
> + interrupts = <0 125 0>, <0 221 0>;
> + interrupt-names = "hc_irq", "pwr_irq";
> + bus-width = <4>;
> +
> + vdd-supply = <&pm8941_l21>;
> + vdd-io-supply = <&pm8941_l13>;
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&sdc2_clk &sdc2_cmd &sdc2_data>;
> +
> + clocks = <&gcc GCC_SDCC2_APPS_CLK>, <&gcc GCC_SDCC2_AHB_CLK>;
> + clock-names = "core", "iface";
> + };
> --
> 1.7.9.5
>
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
