RE: [PATCH RESEND v2 1/3] usb: chipidea: msm: Add device tree binding information

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



 
> 
> On Mon, 2014-02-24 at 08:15 +0000, Peter Chen wrote:
> > > +CI13xxx (Chipidea) USB controllers
> > > +
> > > +Required properties:
> > > +- compatible:   should contain "qcom,ci-hdrc"
> > > +- reg:          offset and length of the register set in the memory
> map
> > > +- interrupts:   interrupt-specifier for the controller interrupt.
> > > +- usb-phy:      phandle for the PHY device
> > > +- dr_mode:      Sould be "peripheral"
> > > +
> > > +	gadget@f9a55000 {
> > > +		compatible = "qcom,ci-hdrc";
> > > +		reg = <0xf9a55000 0x400>;
> > > +		dr_mode = "peripheral";
> > > +		interrupts = <0 134 0>;
> > > +		usb-phy = <&usb_otg>;
> > > +	};
> > > +
> >
> > usb_otg is not a good name for the node of usb phy.
> 
> Well, this is just an example. Is this better <&phy0>?
> 

<&usbphy0> is better since we have ethernet, sata, pcie phy.

Peter

--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux