Add initial device tree nodes for EXYNOS5410 SoC and SMDK5410 board. Signed-off-by: Tarek Dakhran <t.dakhran@xxxxxxxxxxx> Signed-off-by: Vyacheslav Tyrtov <v.tyrtov@xxxxxxxxxxx> Reviewed-by: Tomasz Figa <t.figa@xxxxxxxxxxx> --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/exynos5410-smdk5410.dts | 72 +++++++++++++++ arch/arm/boot/dts/exynos5410.dtsi | 140 +++++++++++++++++++++++++++++ 3 files changed, 213 insertions(+) create mode 100644 arch/arm/boot/dts/exynos5410-smdk5410.dts create mode 100644 arch/arm/boot/dts/exynos5410.dtsi diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index b9d6a8b..693dcdc 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -73,6 +73,7 @@ dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \ exynos5250-smdk5250.dtb \ exynos5250-snow.dtb \ exynos5420-arndale-octa.dtb \ + exynos5410-smdk5410.dtb \ exynos5420-smdk5420.dtb \ exynos5440-sd5v1.dtb \ exynos5440-ssdk5440.dtb diff --git a/arch/arm/boot/dts/exynos5410-smdk5410.dts b/arch/arm/boot/dts/exynos5410-smdk5410.dts new file mode 100644 index 0000000..7ffd351 --- /dev/null +++ b/arch/arm/boot/dts/exynos5410-smdk5410.dts @@ -0,0 +1,72 @@ +/* + * SAMSUNG SMDK5410 board device tree source + * + * Copyright (c) 2013 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/dts-v1/; +#include "exynos5410.dtsi" +/ { + model = "Samsung SMDK5410 board based on EXYNOS5410"; + compatible = "samsung,smdk5410", "samsung,exynos5410"; + + memory { + reg = <0x40000000 0x80000000>; + }; + + chosen { + bootargs = "console=ttySAC2,115200"; + }; + + clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + fin_pll: clock-fin-pll { + compatible = "fixed-clock"; + reg = <0>; + #clock-cells = <0>; + clock-frequency = <24000000>; + clock-output-names = "fin_pll"; + }; + }; + + mmc@12200000 { + status = "okay"; + num-slots = <1>; + supports-highspeed; + broken-cd; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; + + slot@0 { + reg = <0>; + bus-width = <8>; + }; + }; + + mmc@12220000 { + status = "okay"; + num-slots = <1>; + supports-highspeed; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; + + slot@0 { + reg = <0>; + bus-width = <4>; + disable-wp; + }; + }; + +}; diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi new file mode 100644 index 0000000..56b44d1 --- /dev/null +++ b/arch/arm/boot/dts/exynos5410.dtsi @@ -0,0 +1,140 @@ +/* + * SAMSUNG EXYNOS5410 SoC device tree source + * + * Copyright (c) 2013 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * SAMSUNG EXYNOS5410 SoC device nodes are listed in this file. + * EXYNOS5410 based board files can include this file and provide + * values for board specfic bindings. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <dt-bindings/clock/exynos5410.h> +#include "exynos5.dtsi" +/ { + compatible = "samsung,exynos5410"; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0>; + clock-frequency = <1600000000>; + }; + + CPU1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <1>; + clock-frequency = <1600000000>; + }; + + CPU2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <2>; + clock-frequency = <1600000000>; + }; + + CPU3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <3>; + clock-frequency = <1600000000>; + }; + }; + + clock: clock-controller@10010000 { + compatible = "samsung,exynos5410-clock"; + reg = <0x10010000 0x30000>; + #clock-cells = <1>; + }; + + timer@101C0000 { + compatible = "samsung,exynos4210-mct"; + reg = <0x101C0000 0xB00>; + interrupt-parent = <&interrupt_map>; + interrupts = <0>, <1>, <2>, <3>, + <4>, <5>, <6>, <7>, + <8>, <9>, <10>, <11>; + clocks = <&fin_pll>, <&clock CLK_MCT>; + clock-names = "fin_pll", "mct"; + + interrupt_map: interrupt-map { + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = <0 &combiner 23 3>, + <1 &combiner 23 4>, + <2 &combiner 25 2>, + <3 &combiner 25 3>, + <4 &gic 0 120 0>, + <5 &gic 0 121 0>, + <6 &gic 0 122 0>, + <7 &gic 0 123 0>, + <8 &gic 0 128 0>, + <9 &gic 0 129 0>, + <10 &gic 0 130 0>, + <11 &gic 0 131 0>; + }; + }; + + mmc_0: mmc@12200000 { + compatible = "samsung,exynos5250-dw-mshc"; + interrupts = <0 75 0>; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x12200000 0x1000>; + clocks = <&clock CLK_MMC0>, <&clock CLK_SCLK_MMC0>; + clock-names = "biu", "ciu"; + fifo-depth = <0x80>; + status = "disabled"; + }; + + mmc_1: mmc@12210000 { + compatible = "samsung,exynos5250-dw-mshc"; + interrupts = <0 76 0>; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x12210000 0x1000>; + clocks = <&clock CLK_MMC1>, <&clock CLK_SCLK_MMC1>; + clock-names = "biu", "ciu"; + fifo-depth = <0x80>; + status = "disabled"; + }; + + mmc_2: mmc@12220000 { + compatible = "samsung,exynos5250-dw-mshc"; + interrupts = <0 77 0>; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x12220000 0x1000>; + clocks = <&clock CLK_MMC2>, <&clock CLK_SCLK_MMC2>; + clock-names = "biu", "ciu"; + fifo-depth = <0x80>; + status = "disabled"; + }; + + serial@12C00000 { + clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>; + clock-names = "uart", "clk_uart_baud0"; + }; + + serial@12C10000 { + clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>; + clock-names = "uart", "clk_uart_baud0"; + }; + + serial@12C20000 { + clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>; + clock-names = "uart", "clk_uart_baud0"; + }; + +}; -- 1.7.10.4 -- To unsubscribe from this list: send the line "unsubscribe linux-doc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
