[RFC PATCH 4/6] devicetree: bindings: add documentation for voltagedomain

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add documentation for voltage domain binding format. Specific
voltage domains will have bindings corresponding to them.

Signed-off-by: Nishanth Menon <nm@xxxxxx>
---
 .../bindings/power/voltdm/voltage_domain.txt       |   65 ++++++++++++++++++++
 1 file changed, 65 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/power/voltdm/voltage_domain.txt

diff --git a/Documentation/devicetree/bindings/power/voltdm/voltage_domain.txt b/Documentation/devicetree/bindings/power/voltdm/voltage_domain.txt
new file mode 100644
index 0000000..da48a19
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/voltdm/voltage_domain.txt
@@ -0,0 +1,65 @@
+Specifying Voltage Domain information for devices
+=================================================
+
+1. Specifying a voltage domain.
+
+SoCs may have multiple voltage domains under which various clocks operate.
+
+Mandatory Properties:
+- #voltdm-cells - indicates if there are specifiers needed to reference the
+  voltage domain
+
+Optional Properties:
+- voltage-tolerance: Specify the voltage tolerance in percentage
+
+2. Voltage domain consumer
+consumer nodes can be reference using the below binding:
+- <name>-voltdm: phandle to the voltage domain node.
+
+Examples:
+
+A. Voltage Domain controlling multiple regulator
+voltage_domain_mpu: voltdm@1 {
+	compatible = "xyz";
+	#voltdm-cells = <0>;
+	vdd-supply = <&vcc>;
+	vbb-supply = <&abb_mpu>;
+	...
+};
+
+voltage_domain_gpu: voltdm@2 {
+	compatible = "xyz";
+	#voltdm-cells = <0>;
+	vdd-supply = <&dcdc2>;
+	vbb-supply = <&abb_gpu>;
+	...
+};
+...
+&cpu0 {
+	cpu0-voltdm = <&voltage_domain_mpu>;
+	voltage-tolerance = <1>;
+};
+
+&gpu {
+	gpu-voltdm = <&voltage_domain_gpu>;
+};
+
+B. Indexed voltage domain device
+
+#define SOC_XYZ_VOLTAGE_DOMAIN_MPU	0
+#define SOC_XYZ_VOLTAGE_DOMAIN_GFX	1
+
+voltage_domain_socx: voltdm@1 {
+	compatible = "abc";
+	#voltdm-cells = <1>;
+	...
+};
+...
+&cpu0 {
+	cpu0-voltdm = <&voltage_domain_socx SOC_XYZ_VOLTAGE_DOMAIN_MPU>;
+	voltage-tolerance = <1>;
+};
+
+&gpu {
+	gpu-voltdm = <&voltage_domain_socx SOC_XYZ_VOLTAGE_DOMAIN_GFX>;
+};
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux