On Tue, Jan 28, 2014 at 01:39:12AM +0100, Sebastian Hesselbarth wrote:
> This patch set is one required step for Dove to hop into mach-mvebu.
> Until now, pinctrl-dove was hardcoding some registers that do not
> directly belong to MPP core registers. This is not compatible with
> what we want for mach-mvebu.
Hi Sebastian
I think there might be something wrong here....
/debug/pinctrl/f1010000.pinctrl/pinconf-groups used to contain:
Pin config settings per pin group
Format: group (name): configs
0 (mpp0):current: spi(cs), available = [ gpio(io) nand(io2) ]
1 (mpp1):current: spi(mosi), available = [ gpo(o) nand(io3) ]
2 (mpp2):current: spi(sck), available = [ gpo(o) nand(io4) ]
3 (mpp3):current: spi(miso), available = [ gpo(o) nand(io5) ]
4 (mpp4):current: sata1(act), available = [ gpio(io) nand(io6) uart0(rxd) lcd(hsync) ]
5 (mpp5):current: sata0(act), available = [ gpo(o) nand(io7) uart0(txd) lcd(vsync) ]
6 (mpp6):current: sysrst(out), available = [ spi(mosi) ]
...
It now has:
Pin config settings per pin group
Format: group (name): configs
0 (mpp0):current: gpio(io), available = [ nand(io2) spi(cs) ]
1 (mpp1):current: gpo(o), available = [ nand(io3) spi(mosi) ]
2 (mpp2):current: gpo(o), available = [ nand(io4) spi(sck) ]
3 (mpp3):current: gpo(o), available = [ nand(io5) spi(miso) ]
4 (mpp4):current: gpio(io), available = [ nand(io6) uart0(rxd) sata1(act) lcd(hsync) ]
5 (mpp5):current: gpo(o), available = [ nand(io7) uart0(txd) sata0(act) lcd(vsync) ]
6 (mpp6):current: UNKNOWN, available = [ sysrst(out) spi(mosi) ]
The device i'm testing on does use spi and sata, so i would say the
old contents was correct and the new is wrong.
Andrew
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
