On Friday 24 January 2014, Tanmay Inamdar wrote: > +static void xgene_pcie_fixup_bridge(struct pci_dev *dev) > +{ > + int i; > + > + /* Hide the PCI host BARs from the kernel as their content doesn't > + * fit well in the resource management > + */ > + for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) { > + dev->resource[i].start = dev->resource[i].end = 0; > + dev->resource[i].flags = 0; > + } > + dev_info(&dev->dev, "Hiding X-Gene pci host bridge resources %s\n", > + pci_name(dev)); > +} > +DECLARE_PCI_FIXUP_HEADER(XGENE_PCIE_VENDORID, XGENE_PCIE_DEVICEID, > + xgene_pcie_fixup_bridge); Shouldn't this be gone now that the host bridge is correctly shown at the domain root? > +static int xgene_pcie_setup(int nr, struct pci_sys_data *sys) > +{ > + struct xgene_pcie_port *pp = sys->private_data; > + struct resource *io = &pp->realio; > + > + io->start = sys->domain * SZ_64K; > + io->end = io->start + SZ_64K; > + io->flags = pp->io.res.flags; > + io->name = "PCI IO"; > + pci_ioremap_io(io->start, pp->io.res.start); > + > + pci_add_resource_offset(&sys->resources, io, sys->io_offset); > + sys->mem_offset = pp->mem.res.start - pp->mem.pci_addr; > + pci_add_resource_offset(&sys->resources, &pp->mem.res, > + sys->mem_offset); > + return 1; > +} Thanks for bringing back the I/O space handling. You don't seem to set sys->io_offset anywhere, but each of the ports listed in your DT starts a local bus I/O register range at port 0. AFAICT, you need to add (somewhere) sys->io_offset = pp->realio.start - pp->io.pci_addr; but there could be something else missing. You clearly haven't tested if the I/O space actually works. If you want to try out the I/O space, I'd suggest using an Intel e1000 network card, which has both memory and i/o space. There is a patch at http://www.spinics.net/lists/linux-pci/msg27684.html that lets you check the I/O registers on it, or you can go through /dev/port from user space. I also haven't seen your patch that adds pci_ioremap_io() for arm64. It would be helpful to keep it in the same patch series, since it won't build without this patch. Arnd -- To unsubscribe from this list: send the line "unsubscribe linux-doc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html