On Sat, 22 Mar 2025 at 09:24, Thomas Weißschuh <linux@xxxxxxxxxxxxxx> wrote: > > On 2025-03-19 18:55:06+0100, Antheas Kapenekakis wrote: > > Currently, the driver does not adhere to the sysfs-class-hwmon > > specification: 0 is used for auto fan control and 1 is used for manual > > control. However, it is expected that 0 sets the fan to full speed, > > 1 sets the fan to manual, and then 2 is used for automatic control. > > > > Therefore, change the sysfs API to reflect this and enable pwm on 2. > > > > As we are breaking the ABI for this driver, rename oxpec to oxp_ec, > > reflecting the naming convention used by other drivers, to allow for > > a smooth migration in current userspace programs. > > Where is the renaming being done? Good catch thomas. When I did the battery rebase after v4 [1], it seems to have moved from this patch to the battery patch [2] Antheas [1] https://lore.kernel.org/all/20250311165406.331046-13-lkml@xxxxxxxxxxx/ [2] https://lore.kernel.org/all/20250319181044.392235-15-lkml@xxxxxxxxxxx/ > > Closes: https://lore.kernel.org/linux-hwmon/20241027174836.8588-1-derekjohn.clark@xxxxxxxxx/ > > Reviewed-by: Derek J. Clark <derekjohn.clark@xxxxxxxxx> > > Signed-off-by: Antheas Kapenekakis <lkml@xxxxxxxxxxx> > > --- > > drivers/platform/x86/oxpec.c | 35 ++++++++++++++++++++++++++++++++--- > > 1 file changed, 32 insertions(+), 3 deletions(-) > > > > diff --git a/drivers/platform/x86/oxpec.c b/drivers/platform/x86/oxpec.c > > index e84afc5f53379..680fa537babf6 100644 > > --- a/drivers/platform/x86/oxpec.c > > +++ b/drivers/platform/x86/oxpec.c > > @@ -731,7 +731,27 @@ static int oxp_platform_read(struct device *dev, enum hwmon_sensor_types type, > > case hwmon_pwm_input: > > return oxp_pwm_input_read(val); > > case hwmon_pwm_enable: > > - return oxp_pwm_read(val); > > + ret = oxp_pwm_read(val); > > + if (ret) > > + return ret; > > + > > + /* Check for auto and return 2 */ > > + if (!*val) { > > + *val = 2; > > + return 0; > > + } > > + > > + /* Return 0 if at full fan speed, 1 otherwise */ > > + ret = oxp_pwm_fan_speed(val); > > + if (ret) > > + return ret; > > + > > + if (*val == 255) > > + *val = 0; > > + else > > + *val = 1; > > + > > + return 0; > > default: > > break; > > } > > @@ -745,15 +765,24 @@ static int oxp_platform_read(struct device *dev, enum hwmon_sensor_types type, > > static int oxp_platform_write(struct device *dev, enum hwmon_sensor_types type, > > u32 attr, int channel, long val) > > { > > + int ret; > > + > > switch (type) { > > case hwmon_pwm: > > switch (attr) { > > case hwmon_pwm_enable: > > if (val == 1) > > return oxp_pwm_enable(); > > - else if (val == 0) > > + else if (val == 2) > > return oxp_pwm_disable(); > > - return -EINVAL; > > + else if (val != 0) > > + return -EINVAL; > > + > > + /* Enable PWM and set to max speed */ > > + ret = oxp_pwm_enable(); > > + if (ret) > > + return ret; > > + return oxp_pwm_input_write(255); > > case hwmon_pwm_input: > > return oxp_pwm_input_write(val); > > default: > > -- > > 2.48.1 > >
