On Monday, December 23, 2013 5:02 PM, Tanmay Inamdar wrote:
>
> This patch adds the AppliedMicro X-gene SOC PCIe controller driver.
> APM X-Gene PCIe controller supports maximum upto 8 lanes and
> GEN3 speed. X-Gene has maximum 5 PCIe ports supported.
(+cc Jason Gunthorpe, Arnd Bergmann)
Hi Tanmay Inamdar,
I added some minor comments. :-)
>
> Signed-off-by: Tanmay Inamdar <tinamdar@xxxxxxx>
> ---
> drivers/pci/host/Kconfig | 5 +
> drivers/pci/host/Makefile | 1 +
> drivers/pci/host/pcie-xgene.c | 1017 +++++++++++++++++++++++++++++++++++++++++
Would you change the file name to 'pci-xgene.c'?
Now, all PCI host drivers are using the prefix 'pci-', not 'pcie-'.
[.....]
> +#include <linux/module.h>
> +#include <linux/delay.h>
> +#include <linux/pci.h>
> +#include <linux/slab.h>
> +#include <linux/memblock.h>
> +#include <linux/io.h>
> +#include <linux/platform_device.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/of_irq.h>
> +#include <linux/of_pci.h>
> +#include <linux/jiffies.h>
> +#include <linux/clk-private.h>
Would you re-order these headers alphabetically?
It enhances the readability.
[.....]
> +static int xgene_pcie_parse_map_ranges(struct xgene_pcie_port *port)
> +{
> + struct device_node *np = port->node;
> + struct of_pci_range range;
> + struct of_pci_range_parser parser;
> + struct device *dev = port->dev;
> + u32 cfg_map_done = 0;
> + int ret;
> +
> + if (of_pci_range_parser_init(&parser, np)) {
> + dev_err(dev, "missing ranges property\n");
> + return -EINVAL;
> + }
> +
> + /* Get the I/O, memory, config ranges from DT */
> + for_each_of_pci_range(&parser, &range) {
> + struct resource *res = NULL;
> + u64 restype = range.flags & IORESOURCE_TYPE_BITS;
> + u64 end = range.cpu_addr + range.size - 1;
> + dev_dbg(port->dev, "0x%08x 0x%016llx..0x%016llx -> 0x%016llx\n",
> + range.flags, range.cpu_addr, end, range.pci_addr);
> +
> + switch (restype) {
> + case IORESOURCE_IO:
> + res = &port->res[XGENE_IO];
> + of_pci_range_to_resource(&range, np, res);
> + xgene_pcie_setup_ob_reg(port->csr_base, OMR1BARL,
> + XGENE_IO, res);
> + break;
> + case IORESOURCE_MEM:
> + res = &port->res[XGENE_MEM];
> + of_pci_range_to_resource(&range, np, res);
> + xgene_pcie_setup_ob_reg(port->csr_base, OMR2BARL,
> + XGENE_MEM, res);
> + break;
> + case 0:
> + if (!cfg_map_done) {
> + /* config region */
> + if (port->type == PTYPE_ROOT_PORT) {
> + ret = xgene_pcie_map_cfg(port, &range);
> + if (ret)
> + return ret;
> + }
> + cfg_map_done = 1;
> + } else {
> + /* msi region */
> + res = &port->res[XGENE_MSI];
> + of_pci_range_to_resource(&range, np, res);
As Jason Gunthorpe said, the DT 'range' property should not
handle MSI. Please refer to other PCI host drivers such as
pci-mvebu.c, pci-tegra.c and pcie-designware.c.
Currently, 'struct msi_chip', ' struct irq_domain' are used
for implementing MSI feature.
Best regards,
Jingoo Han
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
