[ added linux-ide ML to Cc: ]
On Monday, December 30, 2013 06:37:03 PM Yuvaraj Kumar C D wrote:
> This patch adds dt entry for ahci sata controller and its
> corresponding phy controller.phy node has been added w.r.t
> new generic phy framework.
>
> Signed-off-by: Yuvaraj Kumar C D <yuvaraj.cd@xxxxxxxxxxx>
> ---
>
> Changes since V3:
> 1.Moved the binding info to the /bindings/phy/
>
> Changes since V2:
> 1.Used syscon interface to PMU handling.
> 2.Changed "sata-phy-i2c" to "exynos-sataphy-i2c".
>
> Changes since V1:
> 1.Minor changes to node name convention.
> 2.Updated binding document.
>
> .../devicetree/bindings/ata/exynos-sata-phy.txt | 14 -------
> .../devicetree/bindings/ata/exynos-sata.txt | 25 +++++++-----
> .../devicetree/bindings/phy/samsung-phy.txt | 40 ++++++++++++++++++++
> arch/arm/boot/dts/exynos5250-arndale.dts | 11 ++++++
> arch/arm/boot/dts/exynos5250-smdk5250.dts | 8 +---
> arch/arm/boot/dts/exynos5250.dtsi | 16 ++++++--
> 6 files changed, 81 insertions(+), 33 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/ata/exynos-sata-phy.txt
>
> diff --git a/Documentation/devicetree/bindings/ata/exynos-sata-phy.txt b/Documentation/devicetree/bindings/ata/exynos-sata-phy.txt
> deleted file mode 100644
> index 37824fa..0000000
> --- a/Documentation/devicetree/bindings/ata/exynos-sata-phy.txt
> +++ /dev/null
> @@ -1,14 +0,0 @@
> -* Samsung SATA PHY Controller
> -
> -SATA PHY nodes are defined to describe on-chip SATA Physical layer controllers.
> -Each SATA PHY controller should have its own node.
> -
> -Required properties:
> -- compatible : compatible list, contains "samsung,exynos5-sata-phy"
> -- reg : <registers mapping>
> -
> -Example:
> - sata@ffe07000 {
> - compatible = "samsung,exynos5-sata-phy";
> - reg = <0xffe07000 0x1000>;
> - };
> diff --git a/Documentation/devicetree/bindings/ata/exynos-sata.txt b/Documentation/devicetree/bindings/ata/exynos-sata.txt
> index 0849f10..b2adb1f 100644
> --- a/Documentation/devicetree/bindings/ata/exynos-sata.txt
> +++ b/Documentation/devicetree/bindings/ata/exynos-sata.txt
> @@ -4,14 +4,21 @@ SATA nodes are defined to describe on-chip Serial ATA controllers.
> Each SATA controller should have its own node.
>
> Required properties:
> -- compatible : compatible list, contains "samsung,exynos5-sata"
> -- interrupts : <interrupt mapping for SATA IRQ>
> -- reg : <registers mapping>
> -- samsung,sata-freq : <frequency in MHz>
> +- compatible : compatible list, contains "samsung,exynos5-sata"
> +- interrupts : <interrupt mapping for SATA IRQ>
> +- reg : <registers mapping>
> +- samsung,sata-freq : <frequency in MHz>
> +- phys : as mentioned in phy-bindings.txt
> +- phy-names : as mentioned in phy-bindings.txt
>
> Example:
> - sata@ffe08000 {
> - compatible = "samsung,exynos5-sata";
> - reg = <0xffe08000 0x1000>;
> - interrupts = <115>;
> - };
> + sata@122f0000 {
> + compatible = "snps,dwc-ahci";
> + samsung,sata-freq = <66>;
> + reg = <0x122f0000 0x1ff>;
> + interrupts = <0 115 0>;
> + clocks = <&clock 277>, <&clock 143>;
> + clock-names = "sata", "sclk_sata";
> + phys = <&sata_phy>;
> + phy-names = "sata-phy";
> + };
> diff --git a/Documentation/devicetree/bindings/phy/samsung-phy.txt b/Documentation/devicetree/bindings/phy/samsung-phy.txt
> index c0fccaa..876fe9b 100644
> --- a/Documentation/devicetree/bindings/phy/samsung-phy.txt
> +++ b/Documentation/devicetree/bindings/phy/samsung-phy.txt
> @@ -20,3 +20,43 @@ Required properties:
> - compatible : should be "samsung,exynos5250-dp-video-phy";
> - reg : offset and length of the Display Port PHY register set;
> - #phy-cells : from the generic PHY bindings, must be 0;
> +
> +Samsung SATA PHY Controller
> +---------------------------
> +
> +SATA PHY nodes are defined to describe on-chip SATA Physical layer controllers.
> +Each SATA PHY controller should have its own node.
> +
> +Required properties:
> +- compatible : compatible list, contains "samsung,exynos5250-sata-phy"
> +- reg : offset and length of the SATA PHY register set;
> +- #phy-cells : from the generic phy bindings;
> +
> +Example:
> + sata_phy: sata-phy@12170000 {
> + compatible = "samsung,exynos5250-sata-phy";
> + reg = <0x12170000 0x1ff>;
> + clocks = <&clock 287>;
> + clock-names = "sata_phyctrl";
> + #phy-cells = <0>;
This example needs to be updated as the code below evolved to be just:
samsung,syscon-phandle = <&pmu_syscon>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> + sataphy-pmu {
> + reg = <0x10040724 0x4>;
> + };
Otherwise the patch looks good.
> + };
> +
> +Device-Tree bindings for sataphy i2c client driver
> +--------------------------------------------------
> +
> +Required properties:
> +compatible: Should be "samsung,exynos-sataphy-i2c"
> +- reg: I2C address of the sataphy i2c device.
> +
> +Example:
> +
> + sata-phy@38 {
> + compatible = "samsung,exynos-sataphy-i2c";
> + reg = <0x38>;
> + };
> diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
> index b42e658..25fe5a3 100644
> --- a/arch/arm/boot/dts/exynos5250-arndale.dts
> +++ b/arch/arm/boot/dts/exynos5250-arndale.dts
> @@ -370,6 +370,17 @@
> };
> };
>
> + i2c@121D0000 {
> + samsung,i2c-sda-delay = <100>;
> + samsung,i2c-max-bus-freq = <40000>;
> + samsung,i2c-slave-addr = <0x38>;
> +
> + sata-phy@38 {
> + compatible = "samsung,exynos-sataphy-i2c";
> + reg = <0x38>;
> + };
> + };
> +
> mmc_0: mmc@12200000 {
> status = "okay";
> num-slots = <1>;
> diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts
> index 3e69837..9e449e6 100644
> --- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
> +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
> @@ -96,16 +96,12 @@
> samsung,i2c-slave-addr = <0x38>;
> status = "okay";
>
> - sata-phy {
> - compatible = "samsung,sata-phy";
> + sata-phy@38 {
> + compatible = "samsung,exynos-sataphy-i2c";
> reg = <0x38>;
> };
> };
>
> - sata@122F0000 {
> - samsung,sata-freq = <66>;
> - };
> -
> i2c@12C80000 {
> samsung,i2c-sda-delay = <100>;
> samsung,i2c-max-bus-freq = <66000>;
> diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
> index dbb4a47..626a7d1 100644
> --- a/arch/arm/boot/dts/exynos5250.dtsi
> +++ b/arch/arm/boot/dts/exynos5250.dtsi
> @@ -46,6 +46,7 @@
> i2c6 = &i2c_6;
> i2c7 = &i2c_7;
> i2c8 = &i2c_8;
> + i2c9 = &i2c_9;
> pinctrl0 = &pinctrl_0;
> pinctrl1 = &pinctrl_1;
> pinctrl2 = &pinctrl_2;
> @@ -231,16 +232,23 @@
> };
>
> sata@122F0000 {
> - compatible = "samsung,exynos5-sata-ahci";
> + compatible = "snps,dwc-ahci";
> + samsung,sata-freq = <66>;
> reg = <0x122F0000 0x1ff>;
> interrupts = <0 115 0>;
> clocks = <&clock 277>, <&clock 143>;
> clock-names = "sata", "sclk_sata";
> + phys = <&sata_phy>;
> + phy-names = "sata-phy";
> };
>
> - sata-phy@12170000 {
> - compatible = "samsung,exynos5-sata-phy";
> + sata_phy: sata-phy@12170000 {
> + compatible = "samsung,exynos5250-sata-phy";
> reg = <0x12170000 0x1ff>;
> + clocks = <&clock 287>;
> + clock-names = "sata_phyctrl";
> + #phy-cells = <0>;
> + samsung,syscon-phandle = <&pmu_syscon>;
> };
>
> i2c_0: i2c@12C60000 {
> @@ -358,7 +366,7 @@
> status = "disabled";
> };
>
> - i2c@121D0000 {
> + i2c_9: i2c@121D0000 {
> compatible = "samsung,exynos5-sata-phy-i2c";
> reg = <0x121D0000 0x100>;
> #address-cells = <1>;
Best regards,
--
Bartlomiej Zolnierkiewicz
Samsung R&D Institute Poland
Samsung Electronics
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
