Use mipi_dsi_dcs_write_seq_multi() instead of
mipi_dsi_dcs_write_seq()
Used Coccinelle to make the change. SmPl patch:
@rule_1@
identifier dsi_var;
expression dsi_device;
expression list es;
@@
struct mipi_dsi_device *dsi_var = dsi_device;
+struct mipi_dsi_multi_context dsi_ctx = { .dsi = dsi_var };
<+...
-mipi_dsi_dcs_write_seq(dsi_var,es);
+mipi_dsi_dcs_write_seq_multi(&dsi_ctx,es);
...+>
Signed-off-by: Anusha Srivatsa <asrivats@xxxxxxxxxx>
---
drivers/gpu/drm/panel/panel-sharp-ls060t1sx01.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/panel/panel-sharp-ls060t1sx01.c b/drivers/gpu/drm/panel/panel-sharp-ls060t1sx01.c
index 74c760ee0c2d1c4f1e857872e6ad38de08ab8b2a..387466460f554a9da80d184fc1f93c3b998f6351 100644
--- a/drivers/gpu/drm/panel/panel-sharp-ls060t1sx01.c
+++ b/drivers/gpu/drm/panel/panel-sharp-ls060t1sx01.c
@@ -44,13 +44,14 @@ static void sharp_ls060_reset(struct sharp_ls060 *ctx)
static int sharp_ls060_on(struct sharp_ls060 *ctx)
{
struct mipi_dsi_device *dsi = ctx->dsi;
+ struct mipi_dsi_multi_context dsi_ctx = { .dsi = dsi };
struct device *dev = &dsi->dev;
int ret;
dsi->mode_flags |= MIPI_DSI_MODE_LPM;
- mipi_dsi_dcs_write_seq(dsi, 0xbb, 0x13);
- mipi_dsi_dcs_write_seq(dsi, MIPI_DCS_WRITE_MEMORY_START);
+ mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xbb, 0x13);
+ mipi_dsi_dcs_write_seq_multi(&dsi_ctx, MIPI_DCS_WRITE_MEMORY_START);
ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
if (ret < 0) {
--
2.47.0
