Re: [PATCH v3 3/7] mtd: spi-nor: add the framework for SPI NOR

[Sourav Poddar <sourav.poddar@xxxxxx>]

On Monday 16 December 2013 02:28 PM, Huang Shijie wrote:
> This patch cloned most of the m25p80.c. In theory, it adds a new spi-nor layer.
>
> Before this patch, the layer is like:
>
>                     MTD
>           ------------------------
>                    m25p80
>           ------------------------
> 	       spi bus driver
>           ------------------------
> 	        SPI NOR chip
>
> After this patch, the layer is like:
>                     MTD
>           ------------------------
>                    spi-nor
>           ------------------------
>                    m25p80
>           ------------------------
> 	       spi bus driver
>           ------------------------
> 	       SPI NOR chip
>
> With the spi-nor controller driver(Freescale Quadspi), it looks like:
>                     MTD
>           ------------------------
>                    spi-nor
>           ------------------------
>                  fsl-quadspi
>           ------------------------
> 	       SPI NOR chip
>
> New APIs:
>     spi_nor_scan: used to scan a spi-nor flash.
>
> Signed-off-by: Huang Shijie<b32955@xxxxxxxxxxxxx>
> ---
>   drivers/mtd/Kconfig           |    2 +
>   drivers/mtd/Makefile          |    1 +
>   drivers/mtd/spi-nor/Kconfig   |    6 +
>   drivers/mtd/spi-nor/Makefile  |    1 +
>   drivers/mtd/spi-nor/spi-nor.c | 1086 +++++++++++++++++++++++++++++++++++++++++
>   include/linux/mtd/spi-nor.h   |    5 +
>   6 files changed, 1101 insertions(+), 0 deletions(-)
>   create mode 100644 drivers/mtd/spi-nor/Kconfig
>   create mode 100644 drivers/mtd/spi-nor/Makefile
>   create mode 100644 drivers/mtd/spi-nor/spi-nor.c
>
> diff --git a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig
> index 5fab4e6e..8adb5af 100644
> --- a/drivers/mtd/Kconfig
> +++ b/drivers/mtd/Kconfig
> @@ -320,6 +320,8 @@ source "drivers/mtd/onenand/Kconfig"
>
>   source "drivers/mtd/lpddr/Kconfig"
>
> +source "drivers/mtd/spi-nor/Kconfig"
> +
>   source "drivers/mtd/ubi/Kconfig"
>
>   endif # MTD
> diff --git a/drivers/mtd/Makefile b/drivers/mtd/Makefile
> index 4cfb31e..40fd153 100644
> --- a/drivers/mtd/Makefile
> +++ b/drivers/mtd/Makefile
> @@ -32,4 +32,5 @@ inftl-objs		:= inftlcore.o inftlmount.o
>
>   obj-y		+= chips/ lpddr/ maps/ devices/ nand/ onenand/ tests/
>
> +obj-$(CONFIG_MTD_SPI_NOR_BASE)	+= spi-nor/
>   obj-$(CONFIG_MTD_UBI)		+= ubi/
> diff --git a/drivers/mtd/spi-nor/Kconfig b/drivers/mtd/spi-nor/Kconfig
> new file mode 100644
> index 0000000..41591af
> --- /dev/null
> +++ b/drivers/mtd/spi-nor/Kconfig
> @@ -0,0 +1,6 @@
> +config MTD_SPI_NOR_BASE
> +	bool "the framework for SPI-NOR support"
> +	depends on MTD
> +	help
> +	  This is the framework for the SPI NOR which can be used by the SPI
> +	  device drivers and the SPI-NOR device driver.
> diff --git a/drivers/mtd/spi-nor/Makefile b/drivers/mtd/spi-nor/Makefile
> new file mode 100644
> index 0000000..7dfe1f9
> --- /dev/null
> +++ b/drivers/mtd/spi-nor/Makefile
> @@ -0,0 +1 @@
> +obj-$(CONFIG_MTD_SPI_NOR_BASE)	+= spi-nor.o
> diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
> new file mode 100644
> index 0000000..eb72bce
> --- /dev/null
> +++ b/drivers/mtd/spi-nor/spi-nor.c
> @@ -0,0 +1,1086 @@
> +/*
> + * Cloned most of the code from the m25p80.c
> + *
> + * This code is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include<linux/init.h>
> +#include<linux/err.h>
> +#include<linux/errno.h>
> +#include<linux/module.h>
> +#include<linux/device.h>
> +#include<linux/interrupt.h>
> +#include<linux/mutex.h>
> +#include<linux/math64.h>
> +#include<linux/slab.h>
> +#include<linux/sched.h>
> +#include<linux/mod_devicetable.h>
> +
> +#include<linux/mtd/cfi.h>
> +#include<linux/mtd/mtd.h>
> +#include<linux/mtd/partitions.h>
> +#include<linux/of_platform.h>
> +#include<linux/spi/flash.h>
> +#include<linux/mtd/spi-nor.h>
> +
> +/* Define max times to check status register before we give up. */
> +#define	MAX_READY_WAIT_JIFFIES	(40 * HZ)	/* M25P16 specs 40s max chip erase */
> +
> +#define JEDEC_MFR(_jedec_id)	((_jedec_id)>>  16)
> +
> +/*
> + * Read the status register, returning its value in the location
> + * Return the status register value.
> + * Returns negative if error occurred.
> + */
> +static int read_sr(struct spi_nor *nor)
> +{
> +	int ret;
> +	u8 val;
> +
> +	ret = nor->read_reg(nor, OPCODE_RDSR,&val, 1);
> +	if (ret<  0) {
> +		pr_err("error %d reading SR\n", (int) ret);
> +		return ret;
> +	}
> +
> +	return val;
> +}
> +
> +/*
> + * Read configuration register, returning its value in the
> + * location. Return the configuration register value.
> + * Returns negative if error occured.
> + */
> +static int read_cr(struct spi_nor *nor)
> +{
> +	int ret;
> +	u8 val;
> +
> +	ret = nor->read_reg(nor, OPCODE_RDCR,&val, 1);
> +	if (ret<  0) {
> +		dev_err(nor->dev, "error %d reading CR\n", ret);
> +		return ret;
> +	}
> +
> +	return val;
> +}
> +
> +/*
> + * Dummy Cycle calculation for different type of read.
> + * It can be used to support more commands with
> + * different dummy cycle requirements.
> + */
> +static inline int spi_nor_read_dummy_cycles(struct spi_nor *nor)
> +{
> +	switch (nor->flash_read) {
> +	case SPI_NOR_FAST:
> +	case SPI_NOR_QUAD:
> +		return 1;
> +	case SPI_NOR_NORMAL:
> +		return 0;
> +	}
> +	return 0;
> +}
> +
> +/*
> + * Write status register 1 byte
> + * Returns negative if error occurred.
> + */
> +static inline int write_sr(struct spi_nor *nor, u8 val)
> +{
> +	nor->cmd_buf[0] = val;
> +	return nor->write_reg(nor, OPCODE_WRSR, nor->cmd_buf, 1, 0);
> +}
> +
> +/*
> + * Set write enable latch with Write Enable command.
> + * Returns negative if error occurred.
> + */
> +static inline int write_enable(struct spi_nor *nor)
> +{
> +	return nor->write_reg(nor, OPCODE_WREN, NULL, 0, 0);
> +}
> +
> +/*
> + * Write status Register and configuration register with 2 bytes
> + * The first byte will be written to the status register, while the
> + * second byte will be written to the configuration register.
> + * Return negative if error occured.
> + */
> +static int write_sr_cr(struct spi_nor *nor, u16 val)
> +{
> +	nor->cmd_buf[0] = val&  0xff;
> +	nor->cmd_buf[1] = (val>>  8);
> +
> +	return nor->write_reg(nor, OPCODE_WRSR, nor->cmd_buf, 2, 0);
> +}
> +
> +/*
> + * Send write disble instruction to the chip.
> + */
> +static inline int write_disable(struct spi_nor *nor)
> +{
> +	return nor->write_reg(nor, OPCODE_WRDI, NULL, 0, 0);
> +}
> +
> +static inline struct spi_nor *mtd_to_spi_nor(struct mtd_info *mtd)
> +{
> +	return mtd->priv;
> +}
> +
> +/* Enable/disable 4-byte addressing mode. */
> +static inline int set_4byte(struct spi_nor *nor, u32 jedec_id, int enable)
> +{
> +	int status;
> +	bool need_wren = false;
> +	u8 cmd;
> +
> +	switch (JEDEC_MFR(jedec_id)) {
> +	case CFI_MFR_ST: /* Micron, actually */
> +		/* Some Micron need WREN command; all will accept it */
> +		need_wren = true;
> +	case CFI_MFR_MACRONIX:
> +	case 0xEF /* winbond */:
> +		if (need_wren)
> +			write_enable(nor);
> +
> +		cmd = enable ? OPCODE_EN4B : OPCODE_EX4B;
> +		status = nor->write_reg(nor, cmd, NULL, 0, 0);
> +		if (need_wren)
> +			write_disable(nor);
> +
> +		return status;
> +	default:
> +		/* Spansion style */
> +		nor->cmd_buf[0] = enable<<  7;
> +		return nor->write_reg(nor, OPCODE_BRWR, nor->cmd_buf, 1, 0);
> +	}
> +}
> +
> +static int spi_nor_wait_till_ready(struct spi_nor *nor)
> +{
> +	unsigned long deadline;
> +	int sr;
> +
> +	deadline = jiffies + MAX_READY_WAIT_JIFFIES;
> +
> +	do {
> +		cond_resched();
> +
> +		if ((sr = read_sr(nor))<  0)
> +			break;
> +		else if (!(sr&  SR_WIP))
> +			return 0;
> +	} while (!time_after_eq(jiffies, deadline));
> +
> +	return -ETIMEDOUT;
> +}
> +
> +/*
> + * Service routine to read status register until ready, or timeout occurs.
> + * Returns non-zero if error.
> + */
> +static int wait_till_ready(struct spi_nor *nor)
> +{
> +	return nor->wait_till_ready(nor);
> +}
> +
> +/*
> + * Erase the whole flash memory
> + *
> + * Returns 0 if successful, non-zero otherwise.
> + */
> +static int erase_chip(struct spi_nor *nor)
> +{
> +	int ret;
> +
> +	dev_dbg(nor->dev, " %lldKiB\n", (long long)(nor->mtd->size>>  10));
> +
> +	/* Wait until finished previous write command. */
> +	ret = wait_till_ready(nor);
> +	if (ret)
> +		return ret;
> +
> +	/* Send write enable, then erase commands. */
> +	write_enable(nor);
> +
> +	return nor->write_reg(nor, OPCODE_CHIP_ERASE, NULL, 0, 0);
> +}
> +
> +static int spi_nor_lock_and_prep(struct spi_nor *nor, enum spi_nor_ops ops)
> +{
> +	int ret = 0;
> +
> +	mutex_lock(&nor->lock);
> +
> +	if (nor->prepare) {
> +		ret = nor->prepare(nor, ops);
> +		if (ret) {
> +			dev_err(nor->dev, "failed in the preparation.\n");
> +			mutex_unlock(&nor->lock);
> +			return ret;
> +		}
> +	}
> +	return ret;
> +}
> +
> +static void spi_nor_unlock_and_unprep(struct spi_nor *nor, enum spi_nor_ops ops)
> +{
> +	if (nor->unprepare)
> +		nor->unprepare(nor, ops);
> +	mutex_unlock(&nor->lock);
> +}
> +
> +/*
> + * Erase an address range on the nor chip.  The address range may extend
> + * one or more erase sectors.  Return an error is there is a problem erasing.
> + */
> +static int spi_nor_erase(struct mtd_info *mtd, struct erase_info *instr)
> +{
> +	struct spi_nor *nor = mtd_to_spi_nor(mtd);
> +	u32 addr,len;
> +	uint32_t rem;
> +	int ret;
> +
> +	dev_dbg(nor->dev, "at 0x%llx, len %lld\n", (long long)instr->addr,
> +			(long long)instr->len);
> +
> +	div_u64_rem(instr->len, mtd->erasesize,&rem);
> +	if (rem)
> +		return -EINVAL;
> +
> +	addr = instr->addr;
> +	len = instr->len;
> +
> +	ret = spi_nor_lock_and_prep(nor, SPI_NOR_OPS_ERASE);
> +	if (ret)
> +		return ret;
> +
> +	/* whole-chip erase? */
> +	if (len == mtd->size) {
> +		if (erase_chip(nor)) {
> +			ret = -EIO;
> +			goto erase_err;
> +		}
> +
> +	/* REVISIT in some cases we could speed up erasing large regions
> +	 * by using OPCODE_SE instead of OPCODE_BE_4K.  We may have set up
> +	 * to use "small sector erase", but that's not always optimal.
> +	 */
> +
> +	/* "sector"-at-a-time erase */
> +	} else {
> +		while (len) {
> +			if (nor->erase(nor, addr)) {
> +				ret = -EIO;
> +				goto erase_err;
> +			}
> +
> +			addr += mtd->erasesize;
> +			len -= mtd->erasesize;
> +		}
> +	}
> +
> +	spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_ERASE);
> +
> +	instr->state = MTD_ERASE_DONE;
> +	mtd_erase_callback(instr);
> +
> +	return ret;
> +
> +erase_err:
> +	spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_ERASE);
> +	instr->state = MTD_ERASE_FAILED;
> +	return ret;
> +}
> +
> +static int spi_nor_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
> +{
> +	struct spi_nor *nor = mtd_to_spi_nor(mtd);
> +	uint32_t offset = ofs;
> +	uint8_t status_old, status_new;
> +	int ret = 0;
> +
> +	ret = spi_nor_lock_and_prep(nor, SPI_NOR_OPS_LOCK);
> +	if (ret)
> +		return ret;
> +
> +	/* Wait until finished previous command */
> +	ret = wait_till_ready(nor);
> +	if (ret)
> +		goto err;
> +
> +	status_old = read_sr(nor);
> +
> +	if (offset<  mtd->size - (mtd->size / 2))
> +		status_new = status_old | SR_BP2 | SR_BP1 | SR_BP0;
> +	else if (offset<  mtd->size - (mtd->size / 4))
> +		status_new = (status_old&  ~SR_BP0) | SR_BP2 | SR_BP1;
> +	else if (offset<  mtd->size - (mtd->size / 8))
> +		status_new = (status_old&  ~SR_BP1) | SR_BP2 | SR_BP0;
> +	else if (offset<  mtd->size - (mtd->size / 16))
> +		status_new = (status_old&  ~(SR_BP0 | SR_BP1)) | SR_BP2;
> +	else if (offset<  mtd->size - (mtd->size / 32))
> +		status_new = (status_old&  ~SR_BP2) | SR_BP1 | SR_BP0;
> +	else if (offset<  mtd->size - (mtd->size / 64))
> +		status_new = (status_old&  ~(SR_BP2 | SR_BP0)) | SR_BP1;
> +	else
> +		status_new = (status_old&  ~(SR_BP2 | SR_BP1)) | SR_BP0;
> +
> +	/* Only modify protection if it will not unlock other areas */
> +	if ((status_new&  (SR_BP2 | SR_BP1 | SR_BP0))>
> +				(status_old&  (SR_BP2 | SR_BP1 | SR_BP0))) {
> +		write_enable(nor);
> +		ret = write_sr(nor, status_new);
> +		if (ret)
> +			goto err;
> +	}
> +
> +err:
> +	spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_LOCK);
> +	return ret;
> +}
> +
> +static int spi_nor_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
> +{
> +	struct spi_nor *nor = mtd_to_spi_nor(mtd);
> +	uint32_t offset = ofs;
> +	uint8_t status_old, status_new;
> +	int ret = 0;
> +
> +	ret = spi_nor_lock_and_prep(nor, SPI_NOR_OPS_UNLOCK);
> +	if (ret)
> +		return ret;
> +
> +	/* Wait until finished previous command */
> +	ret = wait_till_ready(nor);
> +	if (ret)
> +		goto err;
> +
> +	status_old = read_sr(nor);
> +
> +	if (offset+len>  mtd->size - (mtd->size / 64))
> +		status_new = status_old&  ~(SR_BP2 | SR_BP1 | SR_BP0);
> +	else if (offset+len>  mtd->size - (mtd->size / 32))
> +		status_new = (status_old&  ~(SR_BP2 | SR_BP1)) | SR_BP0;
> +	else if (offset+len>  mtd->size - (mtd->size / 16))
> +		status_new = (status_old&  ~(SR_BP2 | SR_BP0)) | SR_BP1;
> +	else if (offset+len>  mtd->size - (mtd->size / 8))
> +		status_new = (status_old&  ~SR_BP2) | SR_BP1 | SR_BP0;
> +	else if (offset+len>  mtd->size - (mtd->size / 4))
> +		status_new = (status_old&  ~(SR_BP0 | SR_BP1)) | SR_BP2;
> +	else if (offset+len>  mtd->size - (mtd->size / 2))
> +		status_new = (status_old&  ~SR_BP1) | SR_BP2 | SR_BP0;
> +	else
> +		status_new = (status_old&  ~SR_BP0) | SR_BP2 | SR_BP1;
> +
> +	/* Only modify protection if it will not lock other areas */
> +	if ((status_new&  (SR_BP2 | SR_BP1 | SR_BP0))<
> +				(status_old&  (SR_BP2 | SR_BP1 | SR_BP0))) {
> +		write_enable(nor);
> +		ret = write_sr(nor, status_new);
> +		if (ret)
> +			goto err;
> +	}
> +
> +err:
> +	spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_UNLOCK);
> +	return ret;
> +}
> +
> +struct flash_info {
> +	/* JEDEC id zero means "no ID" (most older chips); otherwise it has
> +	 * a high byte of zero plus three data bytes: the manufacturer id,
> +	 * then a two byte device id.
> +	 */
> +	u32		jedec_id;
> +	u16             ext_id;
> +
> +	/* The size listed here is what works with OPCODE_SE, which isn't
> +	 * necessarily called a "sector" by the vendor.
> +	 */
> +	unsigned	sector_size;
> +	u16		n_sectors;
> +
> +	u16		page_size;
> +	u16		addr_width;
> +
> +	u16		flags;
> +#define	SECT_4K			0x01	/* OPCODE_BE_4K works uniformly */
> +#define	SPI_NOR_NO_ERASE	0x02	/* No erase command needed */
> +#define	SST_WRITE		0x04	/* use SST byte programming */
> +#define	SPI_NOR_NO_FR		0x08	/* Can't do fastread */
> +#define	SECT_4K_PMC		0x10	/* OPCODE_BE_4K_PMC works uniformly */
> +#define	SPI_NOR_QUAD_READ	0x20    /* Flash supports Quad Read */
> +};
> +
> +#define INFO(_jedec_id, _ext_id, _sector_size, _n_sectors, _flags)	\
> +	((kernel_ulong_t)&(struct flash_info) {				\
> +		.jedec_id = (_jedec_id),				\
> +		.ext_id = (_ext_id),					\
> +		.sector_size = (_sector_size),				\
> +		.n_sectors = (_n_sectors),				\
> +		.page_size = 256,					\
> +		.flags = (_flags),					\
> +	})
> +
> +#define CAT25_INFO(_sector_size, _n_sectors, _page_size, _addr_width, _flags)	\
> +	((kernel_ulong_t)&(struct flash_info) {				\
> +		.sector_size = (_sector_size),				\
> +		.n_sectors = (_n_sectors),				\
> +		.page_size = (_page_size),				\
> +		.addr_width = (_addr_width),				\
> +		.flags = (_flags),					\
> +	})
> +
> +/* NOTE: double check command sets and memory organization when you add
> + * more nor chips.  This current list focusses on newer chips, which
> + * have been converging on command sets which including JEDEC ID.
> + */
> +const struct spi_device_id spi_nor_ids[] = {
> +	/* Atmel -- some are (confusingly) marketed as "DataFlash" */
> +	{ "at25fs010",  INFO(0x1f6601, 0, 32 * 1024,   4, SECT_4K) },
> +	{ "at25fs040",  INFO(0x1f6604, 0, 64 * 1024,   8, SECT_4K) },
> +
> +	{ "at25df041a", INFO(0x1f4401, 0, 64 * 1024,   8, SECT_4K) },
> +	{ "at25df321a", INFO(0x1f4701, 0, 64 * 1024,  64, SECT_4K) },
> +	{ "at25df641",  INFO(0x1f4800, 0, 64 * 1024, 128, SECT_4K) },
> +
> +	{ "at26f004",   INFO(0x1f0400, 0, 64 * 1024,  8, SECT_4K) },
> +	{ "at26df081a", INFO(0x1f4501, 0, 64 * 1024, 16, SECT_4K) },
> +	{ "at26df161a", INFO(0x1f4601, 0, 64 * 1024, 32, SECT_4K) },
> +	{ "at26df321",  INFO(0x1f4700, 0, 64 * 1024, 64, SECT_4K) },
> +
> +	{ "at45db081d", INFO(0x1f2500, 0, 64 * 1024, 16, SECT_4K) },
> +
> +	/* EON -- en25xxx */
> +	{ "en25f32",    INFO(0x1c3116, 0, 64 * 1024,   64, SECT_4K) },
> +	{ "en25p32",    INFO(0x1c2016, 0, 64 * 1024,   64, 0) },
> +	{ "en25q32b",   INFO(0x1c3016, 0, 64 * 1024,   64, 0) },
> +	{ "en25p64",    INFO(0x1c2017, 0, 64 * 1024,  128, 0) },
> +	{ "en25q64",    INFO(0x1c3017, 0, 64 * 1024,  128, SECT_4K) },
> +	{ "en25qh256",  INFO(0x1c7019, 0, 64 * 1024,  512, 0) },
> +
> +	/* ESMT */
> +	{ "f25l32pa", INFO(0x8c2016, 0, 64 * 1024, 64, SECT_4K) },
> +
> +	/* Everspin */
> +	{ "mr25h256", CAT25_INFO( 32 * 1024, 1, 256, 2, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
> +	{ "mr25h10",  CAT25_INFO(128 * 1024, 1, 256, 3, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
> +
> +	/* GigaDevice */
> +	{ "gd25q32", INFO(0xc84016, 0, 64 * 1024,  64, SECT_4K) },
> +	{ "gd25q64", INFO(0xc84017, 0, 64 * 1024, 128, SECT_4K) },
> +
> +	/* Intel/Numonyx -- xxxs33b */
> +	{ "160s33b",  INFO(0x898911, 0, 64 * 1024,  32, 0) },
> +	{ "320s33b",  INFO(0x898912, 0, 64 * 1024,  64, 0) },
> +	{ "640s33b",  INFO(0x898913, 0, 64 * 1024, 128, 0) },
> +
> +	/* Macronix */
> +	{ "mx25l2005a",  INFO(0xc22012, 0, 64 * 1024,   4, SECT_4K) },
> +	{ "mx25l4005a",  INFO(0xc22013, 0, 64 * 1024,   8, SECT_4K) },
> +	{ "mx25l8005",   INFO(0xc22014, 0, 64 * 1024,  16, 0) },
> +	{ "mx25l1606e",  INFO(0xc22015, 0, 64 * 1024,  32, SECT_4K) },
> +	{ "mx25l3205d",  INFO(0xc22016, 0, 64 * 1024,  64, 0) },
> +	{ "mx25l3255e",  INFO(0xc29e16, 0, 64 * 1024,  64, SECT_4K) },
> +	{ "mx25l6405d",  INFO(0xc22017, 0, 64 * 1024, 128, 0) },
> +	{ "mx25l12805d", INFO(0xc22018, 0, 64 * 1024, 256, 0) },
> +	{ "mx25l12855e", INFO(0xc22618, 0, 64 * 1024, 256, 0) },
> +	{ "mx25l25635e", INFO(0xc22019, 0, 64 * 1024, 512, 0) },
> +	{ "mx25l25655e", INFO(0xc22619, 0, 64 * 1024, 512, 0) },
> +	{ "mx66l51235l", INFO(0xc2201a, 0, 64 * 1024, 1024, SPI_NOR_QUAD_READ) },
> +
> +	/* Micron */
> +	{ "n25q064",     INFO(0x20ba17, 0, 64 * 1024,  128, 0) },
> +	{ "n25q128a11",  INFO(0x20bb18, 0, 64 * 1024,  256, 0) },
> +	{ "n25q128a13",  INFO(0x20ba18, 0, 64 * 1024,  256, 0) },
> +	{ "n25q256a",    INFO(0x20ba19, 0, 64 * 1024,  512, SECT_4K) },
> +	{ "n25q512a",    INFO(0x20bb20, 0, 64 * 1024, 1024, SECT_4K) },
> +
> +	/* PMC */
> +	{ "pm25lv512",   INFO(0,        0, 32 * 1024,    2, SECT_4K_PMC) },
> +	{ "pm25lv010",   INFO(0,        0, 32 * 1024,    4, SECT_4K_PMC) },
> +	{ "pm25lq032",   INFO(0x7f9d46, 0, 64 * 1024,   64, SECT_4K) },
> +
> +	/* Spansion -- single (large) sector size only, at least
> +	 * for the chips listed here (without boot sectors).
> +	 */
> +	{ "s25sl032p",  INFO(0x010215, 0x4d00,  64 * 1024,  64, 0) },
> +	{ "s25sl064p",  INFO(0x010216, 0x4d00,  64 * 1024, 128, 0) },
> +	{ "s25fl256s0", INFO(0x010219, 0x4d00, 256 * 1024, 128, 0) },
> +	{ "s25fl256s1", INFO(0x010219, 0x4d01,  64 * 1024, 512, SPI_NOR_QUAD_READ) },
> +	{ "s25fl512s",  INFO(0x010220, 0x4d00, 256 * 1024, 256, 0) },
> +	{ "s70fl01gs",  INFO(0x010221, 0x4d00, 256 * 1024, 256, 0) },
> +	{ "s25sl12800", INFO(0x012018, 0x0300, 256 * 1024,  64, 0) },
> +	{ "s25sl12801", INFO(0x012018, 0x0301,  64 * 1024, 256, 0) },
> +	{ "s25fl129p0", INFO(0x012018, 0x4d00, 256 * 1024,  64, 0) },
> +	{ "s25fl129p1", INFO(0x012018, 0x4d01,  64 * 1024, 256, 0) },
> +	{ "s25sl004a",  INFO(0x010212,      0,  64 * 1024,   8, 0) },
> +	{ "s25sl008a",  INFO(0x010213,      0,  64 * 1024,  16, 0) },
> +	{ "s25sl016a",  INFO(0x010214,      0,  64 * 1024,  32, 0) },
> +	{ "s25sl032a",  INFO(0x010215,      0,  64 * 1024,  64, 0) },
> +	{ "s25sl064a",  INFO(0x010216,      0,  64 * 1024, 128, 0) },
> +	{ "s25fl016k",  INFO(0xef4015,      0,  64 * 1024,  32, SECT_4K) },
> +	{ "s25fl064k",  INFO(0xef4017,      0,  64 * 1024, 128, SECT_4K) },
> +
> +	/* SST -- large erase sizes are "overlays", "sectors" are 4K */
> +	{ "sst25vf040b", INFO(0xbf258d, 0, 64 * 1024,  8, SECT_4K | SST_WRITE) },
> +	{ "sst25vf080b", INFO(0xbf258e, 0, 64 * 1024, 16, SECT_4K | SST_WRITE) },
> +	{ "sst25vf016b", INFO(0xbf2541, 0, 64 * 1024, 32, SECT_4K | SST_WRITE) },
> +	{ "sst25vf032b", INFO(0xbf254a, 0, 64 * 1024, 64, SECT_4K | SST_WRITE) },
> +	{ "sst25vf064c", INFO(0xbf254b, 0, 64 * 1024, 128, SECT_4K) },
> +	{ "sst25wf512",  INFO(0xbf2501, 0, 64 * 1024,  1, SECT_4K | SST_WRITE) },
> +	{ "sst25wf010",  INFO(0xbf2502, 0, 64 * 1024,  2, SECT_4K | SST_WRITE) },
> +	{ "sst25wf020",  INFO(0xbf2503, 0, 64 * 1024,  4, SECT_4K | SST_WRITE) },
> +	{ "sst25wf040",  INFO(0xbf2504, 0, 64 * 1024,  8, SECT_4K | SST_WRITE) },
> +
> +	/* ST Microelectronics -- newer production may have feature updates */
> +	{ "m25p05",  INFO(0x202010,  0,  32 * 1024,   2, 0) },
> +	{ "m25p10",  INFO(0x202011,  0,  32 * 1024,   4, 0) },
> +	{ "m25p20",  INFO(0x202012,  0,  64 * 1024,   4, 0) },
> +	{ "m25p40",  INFO(0x202013,  0,  64 * 1024,   8, 0) },
> +	{ "m25p80",  INFO(0x202014,  0,  64 * 1024,  16, 0) },
> +	{ "m25p16",  INFO(0x202015,  0,  64 * 1024,  32, 0) },
> +	{ "m25p32",  INFO(0x202016,  0,  64 * 1024,  64, 0) },
> +	{ "m25p64",  INFO(0x202017,  0,  64 * 1024, 128, 0) },
> +	{ "m25p128", INFO(0x202018,  0, 256 * 1024,  64, 0) },
> +	{ "n25q032", INFO(0x20ba16,  0,  64 * 1024,  64, 0) },
> +
> +	{ "m25p05-nonjedec",  INFO(0, 0,  32 * 1024,   2, 0) },
> +	{ "m25p10-nonjedec",  INFO(0, 0,  32 * 1024,   4, 0) },
> +	{ "m25p20-nonjedec",  INFO(0, 0,  64 * 1024,   4, 0) },
> +	{ "m25p40-nonjedec",  INFO(0, 0,  64 * 1024,   8, 0) },
> +	{ "m25p80-nonjedec",  INFO(0, 0,  64 * 1024,  16, 0) },
> +	{ "m25p16-nonjedec",  INFO(0, 0,  64 * 1024,  32, 0) },
> +	{ "m25p32-nonjedec",  INFO(0, 0,  64 * 1024,  64, 0) },
> +	{ "m25p64-nonjedec",  INFO(0, 0,  64 * 1024, 128, 0) },
> +	{ "m25p128-nonjedec", INFO(0, 0, 256 * 1024,  64, 0) },
> +
> +	{ "m45pe10", INFO(0x204011,  0, 64 * 1024,    2, 0) },
> +	{ "m45pe80", INFO(0x204014,  0, 64 * 1024,   16, 0) },
> +	{ "m45pe16", INFO(0x204015,  0, 64 * 1024,   32, 0) },
> +
> +	{ "m25pe20", INFO(0x208012,  0, 64 * 1024,  4,       0) },
> +	{ "m25pe80", INFO(0x208014,  0, 64 * 1024, 16,       0) },
> +	{ "m25pe16", INFO(0x208015,  0, 64 * 1024, 32, SECT_4K) },
> +
> +	{ "m25px16",    INFO(0x207115,  0, 64 * 1024, 32, SECT_4K) },
> +	{ "m25px32",    INFO(0x207116,  0, 64 * 1024, 64, SECT_4K) },
> +	{ "m25px32-s0", INFO(0x207316,  0, 64 * 1024, 64, SECT_4K) },
> +	{ "m25px32-s1", INFO(0x206316,  0, 64 * 1024, 64, SECT_4K) },
> +	{ "m25px64",    INFO(0x207117,  0, 64 * 1024, 128, 0) },
> +
> +	/* Winbond -- w25x "blocks" are 64K, "sectors" are 4KiB */
> +	{ "w25x10", INFO(0xef3011, 0, 64 * 1024,  2,  SECT_4K) },
> +	{ "w25x20", INFO(0xef3012, 0, 64 * 1024,  4,  SECT_4K) },
> +	{ "w25x40", INFO(0xef3013, 0, 64 * 1024,  8,  SECT_4K) },
> +	{ "w25x80", INFO(0xef3014, 0, 64 * 1024,  16, SECT_4K) },
> +	{ "w25x16", INFO(0xef3015, 0, 64 * 1024,  32, SECT_4K) },
> +	{ "w25x32", INFO(0xef3016, 0, 64 * 1024,  64, SECT_4K) },
> +	{ "w25q32", INFO(0xef4016, 0, 64 * 1024,  64, SECT_4K) },
> +	{ "w25q32dw", INFO(0xef6016, 0, 64 * 1024,  64, SECT_4K) },
> +	{ "w25x64", INFO(0xef3017, 0, 64 * 1024, 128, SECT_4K) },
> +	{ "w25q64", INFO(0xef4017, 0, 64 * 1024, 128, SECT_4K) },
> +	{ "w25q128", INFO(0xef4018, 0, 64 * 1024, 256, SECT_4K) },
> +	{ "w25q80", INFO(0xef5014, 0, 64 * 1024,  16, SECT_4K) },
> +	{ "w25q80bl", INFO(0xef4014, 0, 64 * 1024,  16, SECT_4K) },
> +	{ "w25q128", INFO(0xef4018, 0, 64 * 1024, 256, SECT_4K) },
> +	{ "w25q256", INFO(0xef4019, 0, 64 * 1024, 512, SECT_4K) },
> +
> +	/* Catalyst / On Semiconductor -- non-JEDEC */
> +	{ "cat25c11", CAT25_INFO(  16, 8, 16, 1, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
> +	{ "cat25c03", CAT25_INFO(  32, 8, 16, 2, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
> +	{ "cat25c09", CAT25_INFO( 128, 8, 32, 2, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
> +	{ "cat25c17", CAT25_INFO( 256, 8, 32, 2, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
> +	{ "cat25128", CAT25_INFO(2048, 8, 64, 2, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
> +	{ },
> +};
> +
> +static const struct spi_device_id *spi_nor_read_id(struct spi_nor *nor)
> +{
> +	int			tmp;
> +	u8			id[5];
> +	u32			jedec;
> +	u16                     ext_jedec;
> +	struct flash_info	*info;
> +
> +	tmp = nor->read_reg(nor, OPCODE_RDID, id, 5);
> +	if (tmp<  0) {
> +		dev_dbg(nor->dev, " error %d reading JEDEC ID\n", tmp);
> +		return ERR_PTR(tmp);
> +	}
> +	jedec = id[0];
> +	jedec = jedec<<  8;
> +	jedec |= id[1];
> +	jedec = jedec<<  8;
> +	jedec |= id[2];
> +
> +	ext_jedec = id[3]<<  8 | id[4];
> +
> +	for (tmp = 0; tmp<  ARRAY_SIZE(spi_nor_ids) - 1; tmp++) {
> +		info = (void *)spi_nor_ids[tmp].driver_data;
> +		if (info->jedec_id == jedec) {
> +			if (info->ext_id != 0&&  info->ext_id != ext_jedec)
> +				continue;
> +			return&spi_nor_ids[tmp];
> +		}
> +	}
> +	pr_err("unrecognized JEDEC id %06x\n", jedec);
> +	return ERR_PTR(-ENODEV);
> +}
> +
> +static const struct spi_device_id *jedec_probe(struct spi_nor *nor)
> +{
> +	return nor->read_id(nor);
> +}
> +
> +static int spi_nor_read(struct mtd_info *mtd, loff_t from, size_t len,
> +			size_t *retlen, u_char *buf)
> +{
> +	struct spi_nor *nor = mtd_to_spi_nor(mtd);
> +	int ret;
> +
> +	dev_dbg(nor->dev, "from 0x%08x, len %zd\n", (u32)from, len);
> +
> +	ret = spi_nor_lock_and_prep(nor, SPI_NOR_OPS_READ);
> +	if (ret)
> +		return ret;
> +
> +	/* Wait till previous write/erase is done. */
> +	ret = wait_till_ready(nor);
> +	if (ret)
> +		goto read_err;
> +

Can you shift "wait_till_ready" above spi_nor_lock_and_prep?
One usecase for asking for above change is that I am planning to
use this _prep api for switching to memory mapped mode for read and once
I am switched to mmap mode, read_sr calls in wait_till_ready will not
work for me.

> +	ret = nor->read(nor, from, len, retlen, buf);
> +
> +read_err:
> +	spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_READ);
> +	return ret;
> +}
> +
> +static int sst_write(struct mtd_info *mtd, loff_t to, size_t len,
> +		size_t *retlen, const u_char *buf)
> +{
> +	struct spi_nor *nor = mtd_to_spi_nor(mtd);
> +	size_t actual;
> +	int ret;
> +
> +	dev_dbg(nor->dev, "to 0x%08x, len %zd\n", (u32)to, len);
> +
> +	ret = spi_nor_lock_and_prep(nor, SPI_NOR_OPS_WRITE);
> +	if (ret)
> +		return ret;
> +
> +	/* Wait until finished previous write command. */
> +	ret = wait_till_ready(nor);
> +	if (ret)
> +		goto time_out;
> +
> +	write_enable(nor);
> +
> +	nor->sst_write_second = false;
> +
> +	actual = to % 2;
> +	/* Start write from odd address. */
> +	if (actual) {
> +		nor->program_opcode = OPCODE_BP;
> +
> +		/* write one byte. */
> +		nor->write(nor, to, 1, retlen, buf);
> +		ret = wait_till_ready(nor);
> +		if (ret)
> +			goto time_out;
> +	}
> +	to += actual;
> +
> +	/* Write out most of the data here. */
> +	for (; actual<  len - 1; actual += 2) {
> +		nor->program_opcode = OPCODE_AAI_WP;
> +
> +		/* write two bytes. */
> +		nor->write(nor, to, 2, retlen, buf + actual);
> +		ret = wait_till_ready(nor);
> +		if (ret)
> +			goto time_out;
> +		to += 2;
> +		nor->sst_write_second = true;
> +	}
> +	nor->sst_write_second = false;
> +
> +	write_disable(nor);
> +	ret = wait_till_ready(nor);
> +	if (ret)
> +		goto time_out;
> +
> +	/* Write out trailing byte if it exists. */
> +	if (actual != len) {
> +		write_enable(nor);
> +
> +		nor->program_opcode = OPCODE_BP;
> +		nor->write(nor, to, 1, retlen, buf + actual);
> +
> +		ret = wait_till_ready(nor);
> +		if (ret)
> +			goto time_out;
> +		write_disable(nor);
> +	}
> +time_out:
> +	spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_WRITE);
> +	return ret;
> +}
> +
> +/*
> + * Write an address range to the nor chip.  Data must be written in
> + * FLASH_PAGESIZE chunks.  The address range may be any size provided
> + * it is within the physical boundaries.
> + */
> +static int spi_nor_write(struct mtd_info *mtd, loff_t to, size_t len,
> +	size_t *retlen, const u_char *buf)
> +{
> +	struct spi_nor *nor = mtd_to_spi_nor(mtd);
> +	u32 page_offset, page_size, i;
> +	int ret;
> +
> +	dev_dbg(nor->dev, "to 0x%08x, len %zd\n", (u32)to, len);
> +
> +	ret = spi_nor_lock_and_prep(nor, SPI_NOR_OPS_WRITE);
> +	if (ret)
> +		return ret;
> +
> +	/* Wait until finished previous write command. */
> +	ret = wait_till_ready(nor);
> +	if (ret)
> +		goto write_err;
> +
> +	write_enable(nor);
> +
> +	page_offset = to&  (nor->page_size - 1);
> +
> +	/* do all the bytes fit onto one page? */
> +	if (page_offset + len<= nor->page_size) {
> +		nor->write(nor, to, len, retlen, buf);
> +	} else {
> +		/* the size of data remaining on the first page */
> +		page_size = nor->page_size - page_offset;
> +		nor->write(nor, to, page_size, retlen, buf);
> +
> +		/* write everything in nor->page_size chunks */
> +		for (i = page_size; i<  len; i += page_size) {
> +			page_size = len - i;
> +			if (page_size>  nor->page_size)
> +				page_size = nor->page_size;
> +
> +			wait_till_ready(nor);
> +			write_enable(nor);
> +
> +			nor->write(nor, to + i, page_size, retlen, buf + i);
> +		}
> +	}
> +
> +write_err:
> +	spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_WRITE);
> +	return 0;
> +}
> +
> +static int macronix_quad_enable(struct spi_nor *nor)
> +{
> +	int ret, val;
> +
> +	val = read_sr(nor);
> +	write_enable(nor);
> +
> +	nor->cmd_buf[0] = val | SR_QUAD_EN_MX;
> +	nor->write_reg(nor, OPCODE_WRSR, nor->cmd_buf, 1, 0);
> +
> +	if (wait_till_ready(nor))
> +		return 1;
> +
> +	ret = read_sr(nor);
> +	if (!(ret>  0&&  (ret&  SR_QUAD_EN_MX))) {
> +		dev_err(nor->dev, "Macronix Quad bit not set\n");
> +		return -EINVAL;
> +	}
> +
> +	return 0;
> +}
> +
> +static int spansion_quad_enable(struct spi_nor *nor)
> +{
> +	int ret;
> +	int quad_en = CR_QUAD_EN_SPAN<<  8;
> +
> +	write_enable(nor);
> +
> +	ret = write_sr_cr(nor, quad_en);
> +	if (ret<  0) {
> +		dev_err(nor->dev,
> +			"error while writing configuration register\n");
> +		return -EINVAL;
> +	}
> +
> +	/* read back and check it */
> +	ret = read_cr(nor);
> +	if (!(ret>  0&&  (ret&  CR_QUAD_EN_SPAN))) {
> +		dev_err(nor->dev, "Spansion Quad bit not set\n");
> +		return -EINVAL;
> +	}
> +
> +	return 0;
> +}
> +
> +static int set_quad_mode(struct spi_nor *nor, u32 jedec_id)
> +{
> +	int status;
> +
> +	switch (JEDEC_MFR(jedec_id)) {
> +	case CFI_MFR_MACRONIX:
> +		status = macronix_quad_enable(nor);
> +		if (status) {
> +			dev_err(nor->dev, "Macronix quad-read not enabled\n");
> +			return -EINVAL;
> +		}
> +		return status;
> +	default:
> +		status = spansion_quad_enable(nor);
> +		if (status) {
> +			dev_err(nor->dev, "Spansion quad-read not enabled\n");
> +			return -EINVAL;
> +		}
> +		return status;
> +	}
> +}
> +
> +static int spi_nor_check(struct spi_nor *nor)
> +{
> +	if (!nor->dev || !nor->read || !nor->write ||
> +		!nor->read_reg || !nor->write_reg || !nor->erase) {
> +		pr_err("spi-nor: please fill all the necessary fields!\n");
> +		return -EINVAL;
> +	}
> +
> +	if (!nor->read_id)
> +		nor->read_id = spi_nor_read_id;
> +	if (!nor->wait_till_ready)
> +		nor->wait_till_ready = spi_nor_wait_till_ready;
> +
> +	return 0;
> +}
> +
> +int spi_nor_scan(struct spi_nor *nor, const struct spi_device_id *id,
> +			enum read_mode mode)
> +{
> +	struct flash_info		*info;
> +	struct flash_platform_data	*data;
> +	struct device *dev = nor->dev;
> +	struct mtd_info *mtd = nor->mtd;
> +	struct device_node *np = dev->of_node;
> +	int ret;
> +	int i;
> +
> +	ret = spi_nor_check(nor);
> +	if (ret)
> +		return ret;
> +
> +	/* Platform data helps sort out which chip type we have, as
> +	 * well as how this board partitions it.  If we don't have
> +	 * a chip ID, try the JEDEC id commands; they'll work for most
> +	 * newer chips, even if we don't recognize the particular chip.
> +	 */
> +	data = dev_get_platdata(dev);
> +	if (data&&  data->type) {
> +		const struct spi_device_id *plat_id;
> +
> +		for (i = 0; i<  ARRAY_SIZE(spi_nor_ids) - 1; i++) {
> +			plat_id =&spi_nor_ids[i];
> +			if (strcmp(data->type, plat_id->name))
> +				continue;
> +			break;
> +		}
> +
> +		if (i<  ARRAY_SIZE(spi_nor_ids) - 1)
> +			id = plat_id;
> +		else
> +			dev_warn(dev, "unrecognized id %s\n", data->type);
> +	}
> +
> +	info = (void *)id->driver_data;
> +
> +	if (info->jedec_id) {
> +		const struct spi_device_id *jid;
> +
> +		jid = jedec_probe(nor);
> +		if (IS_ERR(jid)) {
> +			return PTR_ERR(jid);
> +		} else if (jid != id) {
> +			/*
> +			 * JEDEC knows better, so overwrite platform ID. We
> +			 * can't trust partitions any longer, but we'll let
> +			 * mtd apply them anyway, since some partitions may be
> +			 * marked read-only, and we don't want to lose that
> +			 * information, even if it's not 100% accurate.
> +			 */
> +			dev_warn(dev, "found %s, expected %s\n",
> +				 jid->name, id->name);
> +			id = jid;
> +			info = (void *)jid->driver_data;
> +		}
> +	}
> +
> +	mutex_init(&nor->lock);
> +
> +	/*
> +	 * Atmel, SST and Intel/Numonyx serial nor tend to power
> +	 * up with the software protection bits set
> +	 */
> +
> +	if (JEDEC_MFR(info->jedec_id) == CFI_MFR_ATMEL ||
> +	    JEDEC_MFR(info->jedec_id) == CFI_MFR_INTEL ||
> +	    JEDEC_MFR(info->jedec_id) == CFI_MFR_SST) {
> +		write_enable(nor);
> +		write_sr(nor, 0);
> +	}
> +
> +	if (data&&  data->name)
> +		mtd->name = data->name;
> +	else
> +		mtd->name = dev_name(dev);
> +
> +	mtd->type = MTD_NORFLASH;
> +	mtd->writesize = 1;
> +	mtd->flags = MTD_CAP_NORFLASH;
> +	mtd->size = info->sector_size * info->n_sectors;
> +	mtd->_erase = spi_nor_erase;
> +	mtd->_read = spi_nor_read;
> +
> +	/* nor protection support for STmicro chips */
> +	if (JEDEC_MFR(info->jedec_id) == CFI_MFR_ST) {
> +		mtd->_lock = spi_nor_lock;
> +		mtd->_unlock = spi_nor_unlock;
> +	}
> +
> +	/* sst nor chips use AAI word program */
> +	if (info->flags&  SST_WRITE)
> +		mtd->_write = sst_write;
> +	else
> +		mtd->_write = spi_nor_write;
> +
> +	/* prefer "small sector" erase if possible */
> +	if (info->flags&  SECT_4K) {
> +		nor->erase_opcode = OPCODE_BE_4K;
> +		mtd->erasesize = 4096;
> +	} else if (info->flags&  SECT_4K_PMC) {
> +		nor->erase_opcode = OPCODE_BE_4K_PMC;
> +		mtd->erasesize = 4096;
> +	} else {
> +		nor->erase_opcode = OPCODE_SE;
> +		mtd->erasesize = info->sector_size;
> +	}
> +
> +	if (info->flags&  SPI_NOR_NO_ERASE)
> +		mtd->flags |= MTD_NO_ERASE;
> +
> +	mtd->dev.parent = dev;
> +	nor->page_size = info->page_size;
> +	mtd->writebufsize = nor->page_size;
> +
> +	if (np) {
> +		/* If we were instantiated by DT, use it */
> +		if (of_property_read_bool(np, "m25p,fast-read"))
> +			nor->flash_read = SPI_NOR_FAST;
> +	} else {
> +		/* If we weren't instantiated by DT, default to fast-read */
> +		nor->flash_read = SPI_NOR_FAST;
> +	}
> +
> +	/* Some devices cannot do fast-read, no matter what DT tells us */
> +	if (info->flags&  SPI_NOR_NO_FR)
> +		nor->flash_read = SPI_NOR_NORMAL;
> +
> +	/* Quad-read mode takes precedence over fast/normal */
> +	if (mode == SPI_NOR_QUAD&&  info->flags&  SPI_NOR_QUAD_READ) {
> +		ret = set_quad_mode(nor, info->jedec_id);
> +		if (ret) {
> +			dev_err(dev, "quad mode not supported\n");
> +			return ret;
> +		}
> +		nor->flash_read = SPI_NOR_QUAD;
> +	}
> +
> +	/* Default commands */
> +	switch (nor->flash_read) {
> +	case SPI_NOR_QUAD:
> +		nor->read_opcode = OPCODE_QUAD_READ;
> +		break;
> +	case SPI_NOR_FAST:
> +		nor->read_opcode = OPCODE_FAST_READ;
> +		break;
> +	case SPI_NOR_NORMAL:
> +		nor->read_opcode = OPCODE_NORM_READ;
> +		break;
> +	default:
> +		dev_err(dev, "No Read opcode defined\n");
> +		return -EINVAL;
> +	}
> +
> +	nor->program_opcode = OPCODE_PP;
> +
> +	if (info->addr_width)
> +		nor->addr_width = info->addr_width;
> +	else if (mtd->size>  0x1000000) {
> +		/* enable 4-byte addressing if the device exceeds 16MiB */
> +		nor->addr_width = 4;
> +		if (JEDEC_MFR(info->jedec_id) == CFI_MFR_AMD) {
> +			/* Dedicated 4-byte command set */
> +			switch (nor->flash_read) {
> +			case SPI_NOR_QUAD:
> +				nor->read_opcode = OPCODE_QUAD_READ;
> +				break;
> +			case SPI_NOR_FAST:
> +				nor->read_opcode = OPCODE_FAST_READ_4B;
> +				break;
> +			case SPI_NOR_NORMAL:
> +				nor->read_opcode = OPCODE_NORM_READ_4B;
> +				break;
> +			}
> +			nor->program_opcode = OPCODE_PP_4B;
> +			/* No small sector erase for 4-byte command set */
> +			nor->erase_opcode = OPCODE_SE_4B;
> +			mtd->erasesize = info->sector_size;
> +		} else
> +			set_4byte(nor, info->jedec_id, 1);
> +	} else {
> +		nor->addr_width = 3;
> +	}
> +
> +	nor->read_dummy = spi_nor_read_dummy_cycles(nor);
> +
> +	dev_info(dev, "%s (%lld Kbytes)\n", id->name,
> +			(long long)mtd->size>>  10);
> +
> +	dev_dbg(dev, "mtd .name = %s, .size = 0x%llx (%lldMiB) "
> +			".erasesize = 0x%.8x (%uKiB) .numeraseregions = %d\n",
> +		mtd->name,
> +		(long long)mtd->size, (long long)(mtd->size>>  20),
> +		mtd->erasesize, mtd->erasesize / 1024,
> +		mtd->numeraseregions);
> +
> +	if (mtd->numeraseregions)
> +		for (i = 0; i<  mtd->numeraseregions; i++)
> +			dev_dbg(dev,
> +				"mtd.eraseregions[%d] = { .offset = 0x%llx, "
> +				".erasesize = 0x%.8x (%uKiB), "
> +				".numblocks = %d }\n",
> +				i, (long long)mtd->eraseregions[i].offset,
> +				mtd->eraseregions[i].erasesize,
> +				mtd->eraseregions[i].erasesize / 1024,
> +				mtd->eraseregions[i].numblocks);
> +	return 0;
> +}
> +
> +MODULE_LICENSE("GPL");
> +MODULE_AUTHOR("Freescale Semiconductor Inc.");
> +MODULE_DESCRIPTION("framework for SPI NOR nor");
> diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h
> index 83ca63d..a0c2a8b 100644
> --- a/include/linux/mtd/spi-nor.h
> +++ b/include/linux/mtd/spi-nor.h
> @@ -158,4 +158,9 @@ struct spi_nor {
>
>   	void *priv;
>   };
> +
> +int spi_nor_scan(struct spi_nor *nor, const struct spi_device_id *id,
> +			enum read_mode mode);
> +extern const struct spi_device_id spi_nor_ids[];
> +
>   #endif

--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html