On Thu, 09 Jan 2025 13:47:23 -0500 Trevor Gamblin <tgamblin@xxxxxxxxxxxx> wrote: > Add support for the ad4695's oversampling feature when SPI offload is > available. This allows the ad4695 to set oversampling ratios on a > per-channel basis, raising the effective-number-of-bits from 16 > (OSR == 1) to 17 (4), 18 (16), or 19 (64) for a given sample (i.e. one > full cycle through the auto-sequencer). The logic for reading and > writing sampling frequency for a given channel is also adjusted based on > the current oversampling ratio. > > The non-offload case isn't supported as there isn't a good way to > trigger the CNV pin in this mode. Support could be added in the future > if a use-case arises. > > Signed-off-by: Trevor Gamblin <tgamblin@xxxxxxxxxxxx> LGTM Assuming no requests for changes otherwise feel free to poke me when the dependency is available upstream. I'll keep it live in patchwork but I tend only to loop back over outstanding stuff once or twice a cycle and maybe that will be long after needed for this one! Jonathan
