The spi_nor{} is cloned from the m25p{}. The spi_nor{} can be used by both the m25p80 and spi-nor controller. We also add the spi_nor_xfer_cfg{} which can be used by the two fundamental primitives: read_xfer/write_xfer. 1) the hooks for spi_nor{}: @prepare/unpreare: used to do some work before or after the read/write/erase/lock/unlock. @read_xfer/write_xfer: We can use these two hooks to code all the following hooks if the driver tries to implement them by itself. @read_reg: used to read the registers, such as read status register, read configure register. @write_reg: used to write the registers, such as write enable, erase sector. @read_id: read out the ID info. @wait_till_ready: wait till the NOR becomes ready. @read: read out the data from the NOR. @write: write data to the NOR. @erase: erase a sector of the NOR. 2) Add a new field sst_write_second for the SST NOR write. Signed-off-by: Huang Shijie <b32955@xxxxxxxxxxxxx> --- include/linux/mtd/spi-nor.h | 108 +++++++++++++++++++++++++++++++++++++++++++ 1 files changed, 108 insertions(+), 0 deletions(-) diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h index ab2ea1e..83ca63d 100644 --- a/include/linux/mtd/spi-nor.h +++ b/include/linux/mtd/spi-nor.h @@ -50,4 +50,112 @@ /* Configuration Register bits. */ #define CR_QUAD_EN_SPAN 0x2 /* Spansion Quad I/O */ +enum read_mode { + SPI_NOR_NORMAL = 0, + SPI_NOR_FAST, + SPI_NOR_QUAD, +}; + +/* + * struct spi_nor_xfer_cfg - Structure for defining a Serial Flash transfer + * @wren: command for "Write Enable", or 0x00 for not required + * @cmd: command for operation + * @cmd_pins: number of pins to send @cmd (1, 2, 4) + * @addr: address for operation + * @addr_pins: number of pins to send @addr (1, 2, 4) + * @addr_width: number of address bytes (3,4, or 0 for address not required) + * @mode: mode data + * @mode_pins: number of pins to send @mode (1, 2, 4) + * @mode_cycles: number of mode cycles (0 for mode not required) + * @dummy_cycles: number of dummy cycles (0 for dummy not required) + */ +struct spi_nor_xfer_cfg { + u8 wren; + u8 cmd; + u8 cmd_pins; + u32 addr; + u8 addr_pins; + u8 addr_width; + u8 mode; + u8 mode_pins; + u8 mode_cycles; + u8 dummy_cycles; +}; + +#define SPI_NOR_MAX_CMD_SIZE 8 +enum spi_nor_ops { + SPI_NOR_OPS_READ = 0, + SPI_NOR_OPS_WRITE, + SPI_NOR_OPS_ERASE, + SPI_NOR_OPS_LOCK, + SPI_NOR_OPS_UNLOCK, +}; + +struct spi_nor { + struct mtd_info *mtd; + struct mutex lock; + + /* pointer to a spi device */ + struct device *dev; + u32 page_size; + u8 addr_width; + u8 erase_opcode; + u8 read_opcode; + u8 read_dummy; + u8 program_opcode; + enum read_mode flash_read; + bool sst_write_second; + struct spi_nor_xfer_cfg cfg; + + /* for write_reg */ + u8 cmd_buf[SPI_NOR_MAX_CMD_SIZE]; + + /* + * Do some work before or after we run these operations: + * read/write/erese/lock/unlock + */ + int (*prepare)(struct spi_nor *nor, enum spi_nor_ops ops); + void (*unprepare)(struct spi_nor *nor, enum spi_nor_ops ops); + + /* + * The two fundamental primitives, you can use them to implement + * all the other hooks, except the prepare/unprepare. + */ + int (*read_xfer)(struct spi_nor *nor, struct spi_nor_xfer_cfg *cfg, + u8 *buf, size_t len); + int (*write_xfer)(struct spi_nor *nor, struct spi_nor_xfer_cfg *cfg, + u8 *buf, size_t len); + + /* + * The two hooks are used to read/write SPI NOR register, such as + * read status register, write status register. + */ + int (*read_reg)(struct spi_nor *nor, u8 opcode, u8 *buf, int len); + int (*write_reg)(struct spi_nor *nor, u8 opcode, u8 *buf, int len, + int write_enable); + + /* + * The hook for reading out the ID, the spi-nor controller drivers + * can fill it with its own implementation if the default + * could not meet its requirement. + */ + const struct spi_device_id *(*read_id)(struct spi_nor *nor); + + /* + * The hook for "Wait till ready", some spi-nor controller drivers + * may fill it with its own implementation. + */ + int (*wait_till_ready)(struct spi_nor *nor); + + /* write */ + void (*write)(struct spi_nor *nor, loff_t to, + size_t len, size_t *retlen, const u_char *buf); + /* read */ + int (*read)(struct spi_nor *nor, loff_t from, + size_t len, size_t *retlen, u_char *buf); + /* erase a sector(4K/64K, etc..) */ + int (*erase)(struct spi_nor *nor, loff_t offs); + + void *priv; +}; #endif -- 1.7.2.rc3 -- To unsubscribe from this list: send the line "unsubscribe linux-doc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html