I think I can prepare a series that puts my changes
before Tim's. Unless I have trouble doing that
I will send that out in a few hours.
-Alex
> On Dec 15, 2013, at 11:39 AM, Alex Elder <alex.elder@xxxxxxxxxx> wrote:
>
>> On 12/14/2013 05:57 PM, Mike Turquette wrote:
>> Quoting Alex Elder (2013-12-04 07:33:35)
>>> + return true;
>>> +}
>>> +
>>> +/* A bit position must be less than the number of bits in a 32-bit
>>> register. */
>>
>> Hi Alex,
>>
>> The patch is corrupt at line 634 and several other places below. Did
>> you edit it manually? I'm happy with the series after reviewing it but
>> it cannot be applied. Can you fix the issue and send me a pull request?
>>
>> Thanks,
>> Mike
>
> First, yes I sent it manually (copy from the git-generated patch
> and paste into a mail message, and I'm sorry about that. I have
> yet to set up my Linaro settings for "git-send-email" and I'll
> do that this week.
>
> I have a v3 that has been updated to apply to v3.13-rc3 (there
> is no -rc4 yet).
>
> I'm not sure how this works with the series of 8 patches from Tim
> Kryger that it depends on. But here is a pull request for the
> version (including the prerequisites) based on 3.13-rc3. (It is
> done manually again, so there are some line wraps...)
>
> Thanks a lot for the review Mike. I know you're a busy guy.
>
> -Alex
>
> The following changes since commit 374b105797c3d4f29c685f3be535c35f5689b30e:
>
> Linux 3.13-rc3 (2013-12-06 09:34:04 -0800)
>
> are available in the git repository at:
>
> ssh://git@xxxxxxxxxxxxxx/people/alex.elder/linux.git
> review/bcm-kona-clocks-v3
>
> for you to fetch changes up to cf62c29babf6068abf91588411704566812b7900:
>
> ARM: dts: bcm281xx: define real clocks (2013-12-13 10:40:21 -0600)
>
> ----------------------------------------------------------------
> Alex Elder (3):
> clk: bcm281xx: define kona clock binding
> clk: bcm281xx: add initial clock framework support
> ARM: dts: bcm281xx: define real clocks
>
> Tim Kryger (8):
> ARM: dts: Declare clocks as fixed on bcm11351
> ARM: dts: Specify clocks for UARTs on bcm11351
> Documentation: dt: kona-sdhci: Add clocks property
> ARM: dts: Specify clocks for SDHCIs on bcm11351
> mmc: sdhci-bcm-kona: Add basic use of clocks
> Documentation: dt: kona-timer: Add clocks property
> clocksource: kona: Add basic use of external clock
> ARM: dts: Specify clocks for timer on bcm11351
>
> .../devicetree/bindings/arm/bcm/kona-timer.txt | 7 +-
> .../devicetree/bindings/clock/bcm-kona-clock.txt | 93 ++
> .../devicetree/bindings/mmc/kona-sdhci.txt | 4 +
> arch/arm/boot/dts/bcm11351.dtsi | 199 +++-
> drivers/clk/Kconfig | 1 +
> drivers/clk/Makefile | 1 +
> drivers/clk/bcm/Kconfig | 8 +
> drivers/clk/bcm/Makefile | 3 +
> drivers/clk/bcm/clk-bcm281xx.c | 416 ++++++++
> drivers/clk/bcm/clk-kona-setup.c | 769 +++++++++++++++
> drivers/clk/bcm/clk-kona.c | 1033
> ++++++++++++++++++++
> drivers/clk/bcm/clk-kona.h | 414 ++++++++
> drivers/clocksource/bcm_kona_timer.c | 14 +-
> drivers/mmc/host/sdhci-bcm-kona.c | 37 +-
> include/dt-bindings/clock/bcm281xx.h | 65 ++
> 15 files changed, 3053 insertions(+), 11 deletions(-)
> create mode 100644
> Documentation/devicetree/bindings/clock/bcm-kona-clock.txt
> create mode 100644 drivers/clk/bcm/Kconfig
> create mode 100644 drivers/clk/bcm/Makefile
> create mode 100644 drivers/clk/bcm/clk-bcm281xx.c
> create mode 100644 drivers/clk/bcm/clk-kona-setup.c
> create mode 100644 drivers/clk/bcm/clk-kona.c
> create mode 100644 drivers/clk/bcm/clk-kona.h
> create mode 100644 include/dt-bindings/clock/bcm281xx.h
>
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
