We currently leave the decision of whether to shutdown or reboot to
protect hardware in an emergency situation to the individual drivers.
This works out in some cases, where the driver detecting the critical
failure has inside knowledge: It binds to the system management controller
for example or is guided by hardware description that defines what to do.
This is inadequate in the general case though as a driver reporting e.g.
an imminent power failure can't know whether a shutdown or a reboot would
be more appropriate for a given hardware platform.
To address this, this series adds a hw_protection kernel parameter and
sysfs toggle that can be used to change the action from the shutdown
default to reboot. A new hw_protection_trigger API then makes use of
this default action.
My particular use case is unattended embedded systems that don't
have support for shutdown and that power on automatically when power is
supplied:
- A brief power cycle gets detected by the driver
- The kernel powers down the system and SoC goes into shutdown mode
- Power is restored
- The system remains oblivious to the restored power
- System needs to be manually power cycled for a duration long enough
to drain the capacitors
With this series, such systems can configure the kernel with
hw_protection=reboot to have the boot firmware worry about critical
conditions.
---
Ahmad Fatoum (11):
reboot: replace __hw_protection_shutdown bool action parameter with an enum
reboot: reboot, not shutdown, on hw_protection_reboot timeout
docs: thermal: sync hardware protection doc with code
reboot: rename now misleading hw_protection symbols
reboot: indicate whether it is a HARDWARE PROTECTION reboot or shutdown
reboot: add support for configuring emergency hardware protection action
regulator: allow user configuration of hardware protection action
platform/chrome: cros_ec_lpc: prepare for hw_protection_shutdown removal
dt-bindings: thermal: give OS some leeway in absence of critical-action
thermal: core: allow user configuration of hardware protection action
reboot: retire hw_protection_reboot and hw_protection_shutdown helpers
Documentation/ABI/testing/sysfs-kernel-reboot | 8 ++
Documentation/admin-guide/kernel-parameters.txt | 6 +
.../devicetree/bindings/thermal/thermal-zones.yaml | 5 +-
Documentation/driver-api/thermal/sysfs-api.rst | 25 +++--
drivers/platform/chrome/cros_ec_lpc.c | 2 +-
drivers/regulator/core.c | 4 +-
drivers/regulator/irq_helpers.c | 16 +--
drivers/thermal/thermal_core.c | 17 +--
drivers/thermal/thermal_core.h | 1 +
drivers/thermal/thermal_of.c | 7 +-
include/linux/reboot.h | 25 +++--
include/uapi/linux/capability.h | 1 +
kernel/reboot.c | 122 ++++++++++++++++-----
13 files changed, 173 insertions(+), 66 deletions(-)
---
base-commit: 78d4f34e2115b517bcbfe7ec0d018bbbb6f9b0b8
change-id: 20241218-hw_protection-reboot-96953493726a
Best regards,
--
Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
