Add debugfs file for the PMBUS_REVISION command. This command provides
information about PMBus protocol revision number.
Signed-off-by: Ninad Palsule <ninad@xxxxxxxxxxxxx>
---
drivers/hwmon/pmbus/pmbus_core.c | 13 +++++++++++--
1 file changed, 11 insertions(+), 2 deletions(-)
diff --git a/drivers/hwmon/pmbus/pmbus_core.c b/drivers/hwmon/pmbus/pmbus_core.c
index a7000314e5ad..787683e83db6 100644
--- a/drivers/hwmon/pmbus/pmbus_core.c
+++ b/drivers/hwmon/pmbus/pmbus_core.c
@@ -3534,11 +3534,11 @@ static int pmbus_init_debugfs(struct i2c_client *client,
/*
* Allocate the max possible entries we need.
- * 6 entries device-specific
+ * 7 entries device-specific
* 10 entries page-specific
*/
entries = devm_kcalloc(data->dev,
- 6 + data->info->pages * 10, sizeof(*entries),
+ 7 + data->info->pages * 10, sizeof(*entries),
GFP_KERNEL);
if (!entries)
return -ENOMEM;
@@ -3551,6 +3551,15 @@ static int pmbus_init_debugfs(struct i2c_client *client,
* assume that values of the following registers are the same for all
* pages and report values only for page 0.
*/
+ if (pmbus_check_byte_register(client, 0, PMBUS_REVISION)) {
+ entries[idx].client = client;
+ entries[idx].page = 0;
+ entries[idx].reg = PMBUS_REVISION;
+ debugfs_create_file("revision", 0444, data->debugfs,
+ &entries[idx++],
+ &pmbus_debugfs_ops);
+ }
+
if (pmbus_check_block_register(client, 0, PMBUS_MFR_ID)) {
entries[idx].client = client;
entries[idx].page = 0;
--
2.43.0
