Convert register read/write for skcipher via BAM/DMA. with this change all the crypto register configuration will be done via BAM/DMA. This change will prepare command descriptor for all register and write it once. Signed-off-by: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx> --- Change in [v5] * No change Change in [v4] * No change Change in [v3] * No change Change in [v2] * Added initial support to read/write crypto register via BAM for skcipher Change in [v1] * This patch was not included in [v1] drivers/crypto/qce/common.c | 42 ++++++++++++++++++++++--------------- 1 file changed, 25 insertions(+), 17 deletions(-) diff --git a/drivers/crypto/qce/common.c b/drivers/crypto/qce/common.c index 04253a8d3340..d1da6b1938f3 100644 --- a/drivers/crypto/qce/common.c +++ b/drivers/crypto/qce/common.c @@ -34,7 +34,7 @@ static inline void qce_write_array(struct qce_device *qce, u32 offset, int i; for (i = 0; i < len; i++) - qce_write(qce, offset + i * sizeof(u32), val[i]); + qce_write_reg_dma(qce, offset + i * sizeof(u32), val[i], 1); } static inline void @@ -43,7 +43,7 @@ qce_clear_array(struct qce_device *qce, u32 offset, unsigned int len) int i; for (i = 0; i < len; i++) - qce_write(qce, offset + i * sizeof(u32), 0); + qce_write_reg_dma(qce, offset + i * sizeof(u32), 0, 1); } static u32 qce_config_reg(struct qce_device *qce, int little) @@ -86,16 +86,16 @@ static void qce_setup_config(struct qce_device *qce) config = qce_config_reg(qce, 0); /* clear status */ - qce_write(qce, REG_STATUS, 0); - qce_write(qce, REG_CONFIG, config); + qce_write_reg_dma(qce, REG_STATUS, 0, 1); + qce_write_reg_dma(qce, REG_CONFIG, config, 1); } static inline void qce_crypto_go(struct qce_device *qce, bool result_dump) { if (result_dump) - qce_write(qce, REG_GOPROC, BIT(GO_SHIFT) | BIT(RESULTS_DUMP_SHIFT)); + qce_write_reg_dma(qce, REG_GOPROC, BIT(GO_SHIFT) | BIT(RESULTS_DUMP_SHIFT), 1); else - qce_write(qce, REG_GOPROC, BIT(GO_SHIFT)); + qce_write_reg_dma(qce, REG_GOPROC, BIT(GO_SHIFT), 1); } #if defined(CONFIG_CRYPTO_DEV_QCE_SHA) || defined(CONFIG_CRYPTO_DEV_QCE_AEAD) @@ -308,7 +308,7 @@ static void qce_xtskey(struct qce_device *qce, const u8 *enckey, /* Set data unit size to cryptlen. Anything else causes * crypto engine to return back incorrect results. */ - qce_write(qce, REG_ENCR_XTS_DU_SIZE, cryptlen); + qce_write_reg_dma(qce, REG_ENCR_XTS_DU_SIZE, cryptlen, 1); } static int qce_setup_regs_skcipher(struct crypto_async_request *async_req) @@ -325,7 +325,9 @@ static int qce_setup_regs_skcipher(struct crypto_async_request *async_req) u32 encr_cfg = 0, auth_cfg = 0, config; unsigned int ivsize = rctx->ivsize; unsigned long flags = rctx->flags; + int ret; + qce_clear_bam_transaction(qce); qce_setup_config(qce); if (IS_XTS(flags)) @@ -336,7 +338,7 @@ static int qce_setup_regs_skcipher(struct crypto_async_request *async_req) qce_cpu_to_be32p_array(enckey, ctx->enc_key, keylen); enckey_words = keylen / sizeof(u32); - qce_write(qce, REG_AUTH_SEG_CFG, auth_cfg); + qce_write_reg_dma(qce, REG_AUTH_SEG_CFG, auth_cfg, 1); encr_cfg = qce_encr_cfg(flags, keylen); @@ -369,25 +371,31 @@ static int qce_setup_regs_skcipher(struct crypto_async_request *async_req) if (IS_ENCRYPT(flags)) encr_cfg |= BIT(ENCODE_SHIFT); - qce_write(qce, REG_ENCR_SEG_CFG, encr_cfg); - qce_write(qce, REG_ENCR_SEG_SIZE, rctx->cryptlen); - qce_write(qce, REG_ENCR_SEG_START, 0); + qce_write_reg_dma(qce, REG_ENCR_SEG_CFG, encr_cfg, 1); + qce_write_reg_dma(qce, REG_ENCR_SEG_SIZE, rctx->cryptlen, 1); + qce_write_reg_dma(qce, REG_ENCR_SEG_START, 0, 1); if (IS_CTR(flags)) { - qce_write(qce, REG_CNTR_MASK, ~0); - qce_write(qce, REG_CNTR_MASK0, ~0); - qce_write(qce, REG_CNTR_MASK1, ~0); - qce_write(qce, REG_CNTR_MASK2, ~0); + qce_write_reg_dma(qce, REG_CNTR_MASK, ~0, 1); + qce_write_reg_dma(qce, REG_CNTR_MASK0, ~0, 1); + qce_write_reg_dma(qce, REG_CNTR_MASK1, ~0, 1); + qce_write_reg_dma(qce, REG_CNTR_MASK2, ~0, 1); } - qce_write(qce, REG_SEG_SIZE, rctx->cryptlen); + qce_write_reg_dma(qce, REG_SEG_SIZE, rctx->cryptlen, 1); /* get little endianness */ config = qce_config_reg(qce, 1); - qce_write(qce, REG_CONFIG, config); + qce_write_reg_dma(qce, REG_CONFIG, config, 1); qce_crypto_go(qce, true); + ret = qce_submit_cmd_desc(qce, 0); + if (ret) { + dev_err(qce->dev, "Error in skcipher cmd descriptor\n"); + return ret; + } + return 0; } #endif -- 2.34.1