Create intel-quicki2c folder and add Kconfig and Makefile for THC
QuickI2C driver. Add basic device structure, definitions and probe/remove
functions for QuickI2C driver.
Co-developed-by: Xinpeng Sun <xinpeng.sun@xxxxxxxxx>
Signed-off-by: Xinpeng Sun <xinpeng.sun@xxxxxxxxx>
Signed-off-by: Even Xu <even.xu@xxxxxxxxx>
Tested-by: Rui Zhang <rui1.zhang@xxxxxxxxx>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
---
drivers/hid/intel-thc-hid/Kconfig | 11 +
drivers/hid/intel-thc-hid/Makefile | 3 +
.../intel-quicki2c/pci-quicki2c.c | 272 ++++++++++++++++++
.../intel-quicki2c/quicki2c-dev.h | 48 ++++
4 files changed, 334 insertions(+)
create mode 100644 drivers/hid/intel-thc-hid/intel-quicki2c/pci-quicki2c.c
create mode 100644 drivers/hid/intel-thc-hid/intel-quicki2c/quicki2c-dev.h
diff --git a/drivers/hid/intel-thc-hid/Kconfig b/drivers/hid/intel-thc-hid/Kconfig
index 0d0a3877eeb0..275e42a4f7a1 100644
--- a/drivers/hid/intel-thc-hid/Kconfig
+++ b/drivers/hid/intel-thc-hid/Kconfig
@@ -28,4 +28,15 @@ config INTEL_QUICKSPI
Say Y/M here if you want to support Intel QuickSPI. If unsure, say N.
+config INTEL_QUICKI2C
+ tristate "Intel QuickI2C driver based on Intel Touch Host Controller"
+ depends on INTEL_THC_HID
+ help
+ Intel QuickI2C, uses Touch Host Controller (THC) hardware, implements
+ HIDI2C (HID over I2C) protocol. It configures THC to work at I2C
+ mode, and controls THC HW sequencer to accelerate HIDI2C transcation
+ flow.
+
+ Say Y/M here if you want to support Intel QuickI2C. If unsure, say N.
+
endmenu
diff --git a/drivers/hid/intel-thc-hid/Makefile b/drivers/hid/intel-thc-hid/Makefile
index 2dba4db70c33..4d4f02e1c415 100644
--- a/drivers/hid/intel-thc-hid/Makefile
+++ b/drivers/hid/intel-thc-hid/Makefile
@@ -14,4 +14,7 @@ intel-quickspi-objs += intel-quickspi/pci-quickspi.o
intel-quickspi-objs += intel-quickspi/quickspi-hid.o
intel-quickspi-objs += intel-quickspi/quickspi-protocol.o
+obj-$(CONFIG_INTEL_QUICKI2C) += intel-quicki2c.o
+intel-quicki2c-objs += intel-quicki2c/pci-quicki2c.o
+
ccflags-y += -I $(src)/intel-thc
diff --git a/drivers/hid/intel-thc-hid/intel-quicki2c/pci-quicki2c.c b/drivers/hid/intel-thc-hid/intel-quicki2c/pci-quicki2c.c
new file mode 100644
index 000000000000..c956591789c8
--- /dev/null
+++ b/drivers/hid/intel-thc-hid/intel-quicki2c/pci-quicki2c.c
@@ -0,0 +1,272 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright (c) 2024 Intel Corporation */
+
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/irqreturn.h>
+#include <linux/pci.h>
+
+#include "intel-thc-dev.h"
+
+#include "quicki2c-dev.h"
+
+/**
+ * quicki2c_irq_quick_handler - The ISR of the quicki2c driver
+ *
+ * @irq: The irq number
+ * @dev_id: pointer to the device structure
+ *
+ * Return: IRQ_WAKE_THREAD if further process needed.
+ */
+static irqreturn_t quicki2c_irq_quick_handler(int irq, void *dev_id)
+{
+ struct quicki2c_device *qcdev = dev_id;
+
+ if (qcdev->state == QUICKI2C_DISABLED)
+ return IRQ_HANDLED;
+
+ /* Disable THC interrupt before current interrupt be handled */
+ thc_interrupt_enable(qcdev->thc_hw, false);
+
+ return IRQ_WAKE_THREAD;
+}
+
+/**
+ * quicki2c_irq_thread_handler - IRQ thread handler of quicki2c driver
+ *
+ * @irq: The IRQ number
+ * @dev_id: pointer to the quicki2c device structure
+ *
+ * Return: IRQ_HANDLED to finish this handler.
+ */
+static irqreturn_t quicki2c_irq_thread_handler(int irq, void *dev_id)
+{
+ struct quicki2c_device *qcdev = dev_id;
+ int int_mask;
+
+ if (qcdev->state == QUICKI2C_DISABLED)
+ return IRQ_HANDLED;
+
+ int_mask = thc_interrupt_handler(qcdev->thc_hw);
+
+ thc_interrupt_enable(qcdev->thc_hw, true);
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * quicki2c_dev_init - Initialize quicki2c device
+ *
+ * @pdev: pointer to the thc pci device
+ * @mem_addr: The pointer of MMIO memory address
+ *
+ * Alloc quicki2c device structure and initialized THC device,
+ * then configure THC to HIDI2C mode.
+ *
+ * If success, enable THC hardware interrupt.
+ *
+ * Return: pointer to the quicki2c device structure if success
+ * or NULL on failed.
+ */
+static struct quicki2c_device *quicki2c_dev_init(struct pci_dev *pdev, void __iomem *mem_addr)
+{
+ struct device *dev = &pdev->dev;
+ struct quicki2c_device *qcdev;
+ int ret;
+
+ qcdev = devm_kzalloc(dev, sizeof(struct quicki2c_device), GFP_KERNEL);
+ if (!qcdev)
+ return ERR_PTR(-ENOMEM);
+
+ qcdev->pdev = pdev;
+ qcdev->dev = dev;
+ qcdev->mem_addr = mem_addr;
+
+ /* thc hw init */
+ qcdev->thc_hw = thc_dev_init(qcdev->dev, qcdev->mem_addr);
+ if (IS_ERR(qcdev->thc_hw)) {
+ ret = PTR_ERR(qcdev->thc_hw);
+ dev_err_once(dev, "Failed to initialize THC device context, ret = %d.\n", ret);
+ return ERR_PTR(ret);
+ }
+
+ ret = thc_port_select(qcdev->thc_hw, THC_PORT_TYPE_I2C);
+ if (ret) {
+ dev_err_once(dev, "Failed to select THC port, ret = %d.\n", ret);
+ return ERR_PTR(ret);
+ }
+
+ thc_interrupt_config(qcdev->thc_hw);
+
+ thc_interrupt_enable(qcdev->thc_hw, true);
+
+ return qcdev;
+}
+
+/**
+ * quicki2c_dev_deinit - De-initialize quicki2c device
+ *
+ * @qcdev: pointer to the quicki2c device structure
+ *
+ * Disable THC interrupt and deinitilize THC.
+ */
+static void quicki2c_dev_deinit(struct quicki2c_device *qcdev)
+{
+ thc_interrupt_enable(qcdev->thc_hw, false);
+}
+
+/*
+ * quicki2c_probe: Quicki2c driver probe function
+ *
+ * @pdev: point to pci device
+ * @id: point to pci_device_id structure
+ *
+ * Return 0 if success or error code on failed.
+ */
+static int quicki2c_probe(struct pci_dev *pdev,
+ const struct pci_device_id *id)
+{
+ struct quicki2c_device *qcdev;
+ void __iomem *mem_addr;
+ int ret;
+
+ ret = pcim_enable_device(pdev);
+ if (ret) {
+ dev_err_once(&pdev->dev, "Failed to enable PCI device, ret = %d.\n", ret);
+ return ret;
+ }
+
+ pci_set_master(pdev);
+
+ ret = pcim_iomap_regions(pdev, BIT(0), KBUILD_MODNAME);
+ if (ret) {
+ dev_err_once(&pdev->dev, "Failed to get PCI regions, ret = %d.\n", ret);
+ goto disable_pci_device;
+ }
+
+ mem_addr = pcim_iomap_table(pdev)[0];
+
+ ret = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
+ if (ret) {
+ ret = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
+ if (ret) {
+ dev_err_once(&pdev->dev, "No usable DMA configuration %d\n", ret);
+ goto unmap_io_region;
+ }
+ }
+
+ ret = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_ALL_TYPES);
+ if (ret < 0) {
+ dev_err_once(&pdev->dev,
+ "Failed to allocate IRQ vectors. ret = %d\n", ret);
+ goto unmap_io_region;
+ }
+
+ pdev->irq = pci_irq_vector(pdev, 0);
+
+ qcdev = quicki2c_dev_init(pdev, mem_addr);
+ if (IS_ERR(qcdev)) {
+ dev_err_once(&pdev->dev, "QuickI2C device init failed\n");
+ ret = PTR_ERR(qcdev);
+ goto unmap_io_region;
+ }
+
+ pci_set_drvdata(pdev, qcdev);
+
+ ret = devm_request_threaded_irq(&pdev->dev, pdev->irq,
+ quicki2c_irq_quick_handler,
+ quicki2c_irq_thread_handler,
+ IRQF_ONESHOT, KBUILD_MODNAME,
+ qcdev);
+ if (ret) {
+ dev_err_once(&pdev->dev,
+ "Failed to request threaded IRQ, irq = %d.\n", pdev->irq);
+ goto dev_deinit;
+ }
+
+ return 0;
+
+dev_deinit:
+ quicki2c_dev_deinit(qcdev);
+unmap_io_region:
+ pcim_iounmap_regions(pdev, BIT(0));
+disable_pci_device:
+ pci_clear_master(pdev);
+ pci_disable_device(pdev);
+
+ return ret;
+}
+
+/**
+ * quicki2c_remove - Device Removal Routine
+ *
+ * @pdev: PCI device structure
+ *
+ * This is called by the PCI subsystem to alert the driver
+ * that it should release a PCI device.
+ */
+static void quicki2c_remove(struct pci_dev *pdev)
+{
+ struct quicki2c_device *qcdev;
+
+ qcdev = pci_get_drvdata(pdev);
+ if (!qcdev)
+ return;
+
+ quicki2c_dev_deinit(qcdev);
+
+ pcim_iounmap_regions(pdev, BIT(0));
+ pci_clear_master(pdev);
+ pci_disable_device(pdev);
+}
+
+/**
+ * quicki2c_shutdown - Device Shutdown Routine
+ *
+ * @pdev: PCI device structure
+ *
+ * This is called from the reboot notifier
+ * it's a simplified version of remove so we go down
+ * faster.
+ */
+static void quicki2c_shutdown(struct pci_dev *pdev)
+{
+ struct quicki2c_device *qcdev;
+
+ qcdev = pci_get_drvdata(pdev);
+ if (!qcdev)
+ return;
+
+ quicki2c_dev_deinit(qcdev);
+}
+
+static const struct pci_device_id quicki2c_pci_tbl[] = {
+ {PCI_VDEVICE(INTEL, THC_LNL_DEVICE_ID_I2C_PORT1), },
+ {PCI_VDEVICE(INTEL, THC_LNL_DEVICE_ID_I2C_PORT2), },
+ {PCI_VDEVICE(INTEL, THC_PTL_H_DEVICE_ID_I2C_PORT1), },
+ {PCI_VDEVICE(INTEL, THC_PTL_H_DEVICE_ID_I2C_PORT2), },
+ {PCI_VDEVICE(INTEL, THC_PTL_U_DEVICE_ID_I2C_PORT1), },
+ {PCI_VDEVICE(INTEL, THC_PTL_U_DEVICE_ID_I2C_PORT2), },
+ {}
+};
+MODULE_DEVICE_TABLE(pci, quicki2c_pci_tbl);
+
+static struct pci_driver quicki2c_driver = {
+ .name = KBUILD_MODNAME,
+ .id_table = quicki2c_pci_tbl,
+ .probe = quicki2c_probe,
+ .remove = quicki2c_remove,
+ .shutdown = quicki2c_shutdown,
+ .driver.probe_type = PROBE_PREFER_ASYNCHRONOUS,
+};
+
+module_pci_driver(quicki2c_driver);
+
+MODULE_AUTHOR("Xinpeng Sun <xinpeng.sun@xxxxxxxxx>");
+MODULE_AUTHOR("Even Xu <even.xu@xxxxxxxxx>");
+
+MODULE_DESCRIPTION("Intel(R) QuickI2C Driver");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(INTEL_THC);
diff --git a/drivers/hid/intel-thc-hid/intel-quicki2c/quicki2c-dev.h b/drivers/hid/intel-thc-hid/intel-quicki2c/quicki2c-dev.h
new file mode 100644
index 000000000000..90c4ffe5ccfa
--- /dev/null
+++ b/drivers/hid/intel-thc-hid/intel-quicki2c/quicki2c-dev.h
@@ -0,0 +1,48 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright (c) 2024 Intel Corporation */
+
+#ifndef _QUICKI2C_DEV_H_
+#define _QUICKI2C_DEV_H_
+
+#define THC_LNL_DEVICE_ID_I2C_PORT1 0xA848
+#define THC_LNL_DEVICE_ID_I2C_PORT2 0xA84A
+#define THC_PTL_H_DEVICE_ID_I2C_PORT1 0xE348
+#define THC_PTL_H_DEVICE_ID_I2C_PORT2 0xE34A
+#define THC_PTL_U_DEVICE_ID_I2C_PORT1 0xE448
+#define THC_PTL_U_DEVICE_ID_I2C_PORT2 0xE44A
+
+/* Packet size value, the unit is 16 bytes */
+#define MAX_PACKET_SIZE_VALUE_LNL 256
+
+enum quicki2c_dev_state {
+ QUICKI2C_NONE,
+ QUICKI2C_RESETING,
+ QUICKI2C_RESETED,
+ QUICKI2C_INITED,
+ QUICKI2C_ENABLED,
+ QUICKI2C_DISABLED,
+};
+
+struct device;
+struct pci_dev;
+struct thc_device;
+
+/**
+ * struct quicki2c_device - THC QuickI2C device struct
+ * @dev: point to kernel device
+ * @pdev: point to PCI device
+ * @thc_hw: point to THC device
+ * @driver_data: point to quicki2c specific driver data
+ * @state: THC I2C device state
+ * @mem_addr: MMIO memory address
+ */
+struct quicki2c_device {
+ struct device *dev;
+ struct pci_dev *pdev;
+ struct thc_device *thc_hw;
+ enum quicki2c_dev_state state;
+
+ void __iomem *mem_addr;
+};
+
+#endif /* _QUICKI2C_DEV_H_ */
--
2.40.1
