Hi, Are there any more comments on the last two patches 4/5 & 5/5? Thanks. Regards Pankaj -----Original Message----- From: Pankaj Gupta Sent: Monday, November 4, 2024 8:53 PM To: Jonathan Corbet <corbet@xxxxxxx>; Rob Herring <robh@xxxxxxxxxx>; Krzysztof Kozlowski <krzk+dt@xxxxxxxxxx>; Conor Dooley <conor+dt@xxxxxxxxxx>; Shawn Guo <shawnguo@xxxxxxxxxx>; Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>; Pengutronix Kernel Team <kernel@xxxxxxxxxxxxxx>; Fabio Estevam <festevam@xxxxxxxxx>; Pankaj Gupta <pankaj.gupta@xxxxxxx> Cc: linux-doc@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx; imx@xxxxxxxxxxxxxxx; linux-arm-kernel@xxxxxxxxxxxxxxxxxxx; Conor Dooley <conor@xxxxxxxxxx> Subject: [PATCH v10 0/5] v10: firmware: imx: driver for NXP secure-enclave Changes in v10: 5/5 - replaced the u8, u16, u32, u64, with __u8, __u16, __u32, __u64 in 'include/uapi/linux/se_ioctl.h'. 4/5 - No change 3/5 - No change 2/5 - No change 1/5 - No change Reference: - Link to v9: https://lore.kernel.org/r/20241016-imx-se-if-v9-0-fd8fa0c04eab@xxxxxxx Changes in v9: 4/5 - change se_if_remove function signature, required after rebase to v6.12-rc1. - move the info->macros to a structure "struct se_if_defines if_defs". - Removed "info" from "struct se_if_defines if_defs". - Moved "mem_pool" from "struct se_if_defines if_defs" to "priv". - Fetching "info" using container-of. 5/5 - Fetching "info" using container-of. - Fixed issue reported by sparse. Reference: - Link to v8: https://lore.kernel.org/r/20241015-imx-se-if-v8-0-915438e267d3@xxxxxxx Changes in v8: 5/5 - Remove the check for SE_IF_CTX_OPENED. - replaced dev_ctx->priv-dev, priv->dev, whereever possible. - func "if_misc_deregister" moved before func "init_device_context". - func "init_device_context" before func "se_ioctl_cmd_snd_rcv_rsp_handler". - func "se_if_fops_write" and "se_if_fops_read", are moved after func "se_ioctl_get_mu_info". - non static functions "se_dev_ctx_cpy_out_data, se_dev_ctx_shared_mem_cleanup & init_device_context" are moved static and local scope. - Removed back & forth between the two structs "struct se_if_device_ctx *dev_ctx" and "struct se_shared_mem_mgmt_info *se_shared_mem_mgmt" - removed the NULL check for bdesc. - fops_open, is corrected for acquiring the fops_lock. - Fops_close, mutex unlock is removed. Infact check for waiting_rsp_clbk_hdl.dev_ctx, is removed. - sema_init(&dev_ctx->fops_lock, 1);, replaced with Mutex. - structure member se_notify, is removed. 4/5 - removed initializing err to zero in func ele_fetch_soc_info(), - replaced 'return 0', with 'goto exit', if the condition (!priv->mem_pool) is true. - replaced "struct *dev" with "struct se_if_priv *priv", in base_message API(s) and others. - Created a separate structure "struct se_if_defines" to maintain interface's fixed values like cmd_tag, rsp_tag, success_tag etc. - removed the macros "WORD_SZ", "SOC_VER_MASK", "DEFAULT_IMX_SOC_VER", "RESERVED_DMA_POOL". - Added handling for "ctrl+c", by postponing the interrupt, till the response to the "command in flight" is received. - Removed the mutext lock "se_if_lock". - furnction prototype for "se_save_imem_state" and "se_restore_imem_state", is changed to pass "imem" by reference. - Added a new structure "struct se_fw_load_info", dedicated to contain FW loading relevant info. It is a member of struct info_list. - split "imem_mgmt_file_in_rfs" into two "prim_fw_nm_in_rfs" and "seco_fw_nm_in_rfs", to be part of "struct se_fw_load_info". - moved the function "se_load_firmware" prior to func "if_mbox_free_channel". - function "se_load_firmware" is updated to use "request_firmware", instead of "request_firmware_no_wait". - function "se_load_firmware" is updated to load "primary" fw image, if the imem_state is not BAD. Then load the "secondary FW" image. - Added a new mutex_lock in the function "se_load_firmware", for ensuring FW loading done once, when there are multiple application are in play. - instead of "wait_queue_head_t wq", used "sruct completion". - add devm_add_action with action as se_if_probe_cleanup. Reference: - Link to v7: https://lore.kernel.org/r/20240904-imx-se-if-v7-0-5afd2ab74264@xxxxxxx Changes in v7: 5/5 - struct se_clbk_handle, is added with a member struct se_if_device_ctx *dev_ctx. - func call to ele_miscdev_msg_rcv() & ele_miscdev_msg_send(), are removed. - func se_ioctl_cmd_snd_rcv_rsp_handler(), is modified to remove the func call to ele_miscdev_msg_rcv() & ele_miscdev_msg_send() - func se_ioctl_cmd_snd_rcv_rsp_handler is callig func ele_msg_send_rcv(), instead. - Mutext "se_cmd_if_lock", handling is removed from this patch. - func ele_miscdev_msg_send() is replaced with func ele_msg_send(), in fops_write. - func ele_miscdev_msg_rcv() is replaced with func ele_msg_rcv(), in fops_read. - fops_open is modified to create the new dev_ctx instance (using func init_device_context()), which is not registered as miscdev. - Only one dev_ctx is registered as miscdev and its reference is stored in the struct se_if_priv, as priv_dev_ctx. - Separate func cleanup_se_shared_mem() & func init_se_shared_mem(), for shared memory handling part of struct dev_ctx. - Input param for func(s) ele_msg_rcv(), ele_msg_send() & ele_msg_send_rcv(), is replaced from struct se_if_priv to struct se_if_device_ctx. 4/5 - A new structure is defined name struct "se_clbk_handle", to contain members processed in mailbox call-back function. - "struct se_if_priv" is modified to contain the two structures of "se_clbk_handle" - waiting_rsp_clbk_hdl & cmd_receiver_clbk_hdl. - func ele_msg_rcv() is modified to take a new additional input reference param "struct se_clbk_handle *se_clbk_hdl". - func ele_msg_send() is modified to take a new additional input tx_msg_sz. - func ele_msg_send_rcv(), is modified to take 2 more inputs - tx_msg_sz & exp_rx_msg_sz. - func se_val_rsp_hdr_n_status(), is modified to take input of rx_msg buffer, instead of header value, as input param. - each caller of the func ele_msg_send_rcv(), is sending these two additional input params. - func se_if_callback(), is modified to work on two structures of "se_clbk_handle" - waiting_rsp_clbk_hdl & cmd_receiver_clbk_hdl. - Variable "max_dev_ctx", is removed from info & priv struture, as well its usage. - New member variable "se_img_file_to_load", is added to structure "priv". - Other member variables - rx_msg(ptr), rx_msg_sz, completion done & list of dev_ctxs, is removed from priv struture, along with their usage. - func se_resume(), updated to wakeup the two "wq", part of "struct se_clbk_handle": priv->waiting_rsp_clbk_hdl & priv->cmd_receiver_clbk_hdl. 3/5 - Node name is changed from senclave-firmware@0 to "secure-enclave" 2/5 - Node name is changed to "secure-enclave". Reference: - Link to v6: https://lore.kernel.org/r/20240722-imx-se-if-v6-0-ee26a87b824a@xxxxxxx Changes in v6: 5/5 - replaced scope_gaurd with gaurd. 4/5 - replaced scope_gaurd with gaurd. - remove reading the regs property from dtb. - Added NULL check for priv data fetched from device, as a sanity check, for ele_base_msg apis) 3/5 - replace firmware with senclave-firmware. 2/5 - replace firmware with senclave-firmware. - drop description for mbox - Replaced "items:" with maxItems:1 for "memory-region" - Replaced "items:" with maxItems:1 for "sram" - remove regs property. - remove "$nodename" Reference: - Link to v5: https://lore.kernel.org/r/20240712-imx-se-if-v5-0-66a79903a872@xxxxxxx Changes in v5: 2/5 - updated the description of mboxes - updated the description & items for mbox-names. - updated the description of memory-region - move "additional properties: false" after allOf block. - removed other example except one. 4/5 - Corrected the indentation in Kconfig. - info members:mbox_tx_name & mbox_rx_name, are replaced with macros. 5/5 - Replaced "for secure enclaves", with "for secure enclaves" - Replaced "user space" with "userspace". - End the line "[include]<linux/firmware/imx/ele_mu_ioctl.h>" with a period. Reference: - Link to v4: https://lore.kernel.org/r/20240705-imx-se-if-v4-0-52d000e18a1d@xxxxxxx Changes in v4: 1/5 a. Removed - from EdgeLock Enclave. b. Removed , after "Each of the above feature," c. replace "can exists" with "can exist". d. -messaging units(MU) per SE. Each co-existing 'se' can have one or multiple exclusive -MU(s), dedicated to itself. None of the MU is shared between two SEs. +messaging units(MU) per SE. Each co-existing SE can have one or +multiple exclusive MUs, dedicated to itself. None of the MU is shared between two SEs. Communication of the MU is realized using the Linux mailbox driver. e. -All those SE interfaces 'se-if' that is/are dedicated to a particular SE, will be -enumerated and provisioned under the very single 'SE' node. +Although MU(s) is/are not shared between SE(s). But for SoC like i.MX95 +which has multiple SE(s) like HSM, V2X-HSM, V2X-SHE; all the SE(s) and their interfaces 'se-if' +that is/are dedicated to a particular SE will be enumerated and +provisioned using the single compatible node("fsl,imx95-se"). f. Removed ",". Replaced for "Each 'se-if'," with "Each se-if'. g. removed "," - This layer is responsible for ensuring the communication protocol, that is defined + This layer is responsible for ensuring the communication protocol + that is defined h. removed "-" - - FW can handle one command-message at a time. + - FW can handle one command message at a time. i. - Using these multiple device contexts, that are getting multiplexed over a single MU, - user-space application(s) can call fops like write/read to send the command-message, - and read back the command-response-message to/from Firmware. - fops like read & write uses the above defined service layer API(s) to communicate with + Using these multiple device contexts that are getting multiplexed + over a single MU, userspace application(s) can call fops like + write/read to send the command message, and read back the command response message to/from Firmware. + fops like read & write use the above defined service layer API(s) to + communicate with Firmware. j. Uppercase for word "Linux". 2/5 a. Rephrased the description to remove list of phandles. b. Moved required before allOf: +required: + - compatible + - reg + - mboxes + - mbox-names + +additionalProperties: false + allOf: c. replaced not: required: with properties: <property-name>: false. # memory-region - not: - required: - - memory-region + properties: + memory-region: false # sram - else: - not: - required: - - sram d. Reduced examples. keeping example of i.MX95. e. node-name is changed to "firmware@<hex>" 3/5 - node name changed to "firmware@<hex>". 4/5 - used sizeof(*s_info) - return early, rather than doing goto exit, in ele_get_info(). - Use upper_32_bits() and lower_32_bits() - use rx_msg here instead of priv->rx_msg - Moved the status check to validate_rsp_hdr. Rename the function to "se_val_rsp_hdr_n_status" - typecasting removed header = (struct se_msg_hdr *) msg; - Converted the API name with prefix imx_ele_* or imx_se_*, to ele_* and se_*, respectively. - Removed the functions definition & declaration for: free_phybuf_mem_pool() & get_phybuf_mem_pool() - removed the mbox_free_channel() calls from clean-up. - Flag "priv->flags" is removed. - Converted the int se_if_probe_cleanup() to void se_if_probe_cleanup(). - Replaced NULL initialization of structure members: priv->cmd_receiver_dev & priv->waiting_rsp_dev , with comments. - Removed the function's declaration get_phy_buf_mem_pool1 5/5 Changes to Documentation/ABI/testing/se-cdev. a. Removed "-" from "secure-enclave" and "file-descriptor". b. Removed "-" from "shared-library" c. Replaced "get" with "getting". d. Added description for the new IOCTL "send command and receive command response" e. Replaced "wakeup_intruptible" with "wait_event_interruptible" f. Removed ";" g. Removd "," from "mailbox_lock," h. Replaced "free" with "frees" i. In mailbox callback function, checking the buffer size before copying. Reference: - Link to v3: https://lore.kernel.org/r/20240617-imx-se-if-v3-0-a7d28dea5c4a@xxxxxxx Changes in v3: 5/5: - Initialize tx_msg with NULL. - memdup_user() returns an error pointer, not NULL. correct it by adding check for err_ptr. - new IOCTL is added to send & recieve the message. - replaced the while loop till list is empty, with list_for_each_entry. - replaced __list_del_entry, with list_del. - Removed the dev_err message from copy to user. - Removed the casting of void *. - corrected the typcasting in copy to user. - removed un-necessary goto statement. - Removed dead code for clean-up of memory. - Removed un-mapping of secured memory - Passing se_if_priv structure to init_device_context. - Updated the below check to replace io.length with round_up(io.length). if (shared_mem->size < shared_mem->pos|| io.length >= shared_mem->size - shared_mem->pos) - Created a function to cleanup the list of shared memory buffers. - Used list_for_each_entry_safe(). created a separate functions: se_dev_ctx_cpy_out_data() & se_dev_ctx_shared_mem_cleanup() 4/5 - Changed the compatible string to replace "-ele", to "-se". - Declaration of imx_se_node_info, is done as const in the whole file - Remove the unused macros from ele_base_msg.h - Remove the function declaration get_phy_buf_mem_pool1, from the header file. - Replace the use of dmam_alloc_coherent to dma_alloc_coherent - Check for function pointer, before calling the fucntion pointer in imx_fetch_se_soc_info - Removed the unused flag for SE_MU_IO_FLAGS_USE_SEC_MEM. - Removed the unused macros WORD_SZ - instead of struct device *dev, struct se_if_priv *priv, is used as argument to the funtions:se_save_imem_state, se_restore_imem_state, imx_fetch_se_soc_info - Removed ret from validate_rsp_hdr. - changed the prefix of the funtion: plat_add_msg_crc and plat_fill_cmd_msg_hdr. - indentation correction for info structures. - remove the check for priv not null from se_if_probe_cleanup - Removed the casting of void *. - se_load_firmware function is corrected for not freeing the buffer when allocation fails. - Checking if get_imx_se_node_info() can return NULL, in se_if_probe() - imem.size has type u32. return value from se_save_imem_state() will be assigned to imem.size in case of success only. - removed the flag un-setting in case of failure. priv->flags &= (~RESERVED_DMA_POOL); - removed the function call for devm_of_platform_populate(dev); - Checking for not-NULL, before calling the funtion pointer se_fetch_soc_info. - Removed the checking for reserved memory flag, before freeing up the reserved memory, in se_probe_if_cleanup. 3/5 - Changed the compatible string to replace "-ele", to "-se". 2/5 - to fix the warning error, replaced the "-ele" & "-v2x" in compatible string, to "-se". - Added an example for ele@0 for compatible string "fsl,imx95-se" Reference - Link to v2: https://lore.kernel.org/r/20240523-imx-se-if-v2-0-5a6fd189a539@xxxxxxx Changes in v2: 4/4 - Split this patch into two: 1. base driver & 2. Miscdev - Initialize the return variable "err" as 0, before calling 'return err', in the file ele_common.c - Fix the usage of un-iniitialized pointer variable, by initializing them with NULL, in ele_base_msg.c. - Fix initializing the ret variable, to return the correct error code in case of issue. - replaced dmam_alloc_coherent with dma_alloc_coherent. - Replace the use of ELE_GET_INFO_READ_SZ, with sizeof(soc_info). - Replaced -1 with -EPERM - Removed the safety check on func-input param, in ele_get_info(). - fix the assigning data[1] with lower 32 address, rather than zero, for ele_fw_authenticate API. - Correctly initializing the function's return error code, for file ele_base_msg.c. - replaced 'return' with 'goto'. - Use length in bytes. - Corrected the structure se_msg_hdr. - Moved setting of rx_msg to priv, into the function imx_ele_msg_send_rcv - Will add lockdep_assert_held, to receive path, in v2. - corrected the spacing at "ret = validate_rsp_hdr" - FIELD_GET() used for RES_STATUS - Re-write the structure soc_info, matching the information provided in response to this api. - The "|" goes to the end of the previous line. - Moved the locking and unlocking of the command lock to the caller of the function. - removed the safety check for device private data. - Structure memory reference, used to read message header. - In the interrupt call back function, remove assigning waiting_rsp_dev to NULL, in case of response message rcv from FW. - do while removed. - replaced BIT(1) for RESERVED_DMA_POOL, to BIT(0) - The backslash is removed while assigning the file name with absolute path to structure variable.fw_name_in_rfs =. - Update the 'if' condition by removing "idx < 0". - mbox_request_channel_byname() uses a "char" for the name not a u8. Corrected. - devm managed resources, are not cleaned now, in function se_probe_if_cleanup - Used dev_err_probe(). - Used %pe to print error string. - remove "__maybe_unused" for "struct platform_device *enum_plat_dev __maybe_unused;" - used FIELD_GET(), for RES_STATUS. Removed the use of MSG_TAG, MSG_COMMAND, MSG_SIZE, MSG_VER. - Depricated the used of member of struct se_if_priv, bool no_dev_ctx_used; - Moved the text explaing the synchronization logic via mutexes, from patch 1/4 to se_ctrl.h. - removed the type casting of info_list = (struct imx_se_node_info_list *) device_get_match_data(dev->parent); - Used static variable priv->soc_rev in the se_ctrl.c, replaced the following condition: if (info_list->soc_rev) to if (priv->soc_rev) for checking if this flow is already executed or not. - imx_fetch_soc_info will return failure if the get_info function fails. - Removed devm_free from imx_fetch_soc_info too. 3/3 - Made changes to move all the properties to parent node, without any child node. 2/4 - Use Hex pattern string. - Move the properties to parent node, with no child node. - Add i.MX95-ele to compatible nodes to fix the warning "/example-2/v2x: failed to match any schema with compatible: ['fsl,imx95-v2x']" 1/1 - Corrected the spelling from creats to creates. - drop the braces around the plural 's' for interfaces - written se in upper case SE. - Replace "multiple message(s)" with messages. - Removed too much details about locks. Testing - make CHECK_DTBS=y freescale/imx8ulp-evk.dtb; - make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- -j8 dt_binding_check DT_SCHEMA_FILES=fsl,imx-se.yaml - make C=1 CHECK=scripts/coccicheck drivers/firmware/imx/*.* W=1 > r.txt - ./scripts/checkpatch.pl --git <>..HEAD - Tested the Image and .dtb, on the i.MX8ULP. Reference - Link to v1: https://lore.kernel.org/r/20240510-imx-se-if-v1-0-27c5a674916d@xxxxxxx --- Pankaj Gupta (5): Documentation/firmware: add imx/se to other_interfaces dt-bindings: arm: fsl: add imx-se-fw binding doc arm64: dts: imx8ulp-evk: add nxp secure enclave firmware firmware: imx: add driver for NXP EdgeLock Enclave firmware: imx: adds miscdev Documentation/ABI/testing/se-cdev | 43 + .../devicetree/bindings/firmware/fsl,imx-se.yaml | 91 ++ .../driver-api/firmware/other_interfaces.rst | 121 ++ arch/arm64/boot/dts/freescale/imx8ulp-evk.dts | 17 +- arch/arm64/boot/dts/freescale/imx8ulp.dtsi | 13 +- drivers/firmware/imx/Kconfig | 13 + drivers/firmware/imx/Makefile | 2 + drivers/firmware/imx/ele_base_msg.c | 279 ++++ drivers/firmware/imx/ele_base_msg.h | 94 ++ drivers/firmware/imx/ele_common.c | 333 +++++ drivers/firmware/imx/ele_common.h | 51 + drivers/firmware/imx/se_ctrl.c | 1331 ++++++++++++++++++++ drivers/firmware/imx/se_ctrl.h | 134 ++ include/linux/firmware/imx/se_api.h | 14 + include/uapi/linux/se_ioctl.h | 96 ++ 15 files changed, 2629 insertions(+), 3 deletions(-) --- base-commit: 607c67544a955d27a91698aaa00a5f7fd0d7d14c change-id: 20240507-imx-se-if-a40055093dc6 Best regards, -- Pankaj Gupta <pankaj.gupta@xxxxxxx>
Attachment:
smime.p7s
Description: S/MIME cryptographic signature
