RE: [PATCH v4 09/17] usb: phy-mxs: Enable IC fixes for related SoCs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




 
> On 12/03/2013 09:38 AM, Peter Chen wrote:
> >
> >>
> >> On 12/03/2013 08:37 AM, Peter Chen wrote:
> >>> Some PHY bugs are fixed by IC logic, but these bits are not
> >>> enabled by default, so we enable them at driver.
> >>>
> >>> Signed-off-by: Peter Chen <peter.chen@xxxxxxxxxxxxx>
> >>> ---
> >>>  drivers/usb/phy/phy-mxs-usb.c |   20 ++++++++++++++++++++
> >>>  1 files changed, 20 insertions(+), 0 deletions(-)
> >>>
> >>> diff --git a/drivers/usb/phy/phy-mxs-usb.c b/drivers/usb/phy/phy-mxs-
> >> usb.c
> >>> index 8738890..0908d74 100644
> >>> --- a/drivers/usb/phy/phy-mxs-usb.c
> >>> +++ b/drivers/usb/phy/phy-mxs-usb.c
> >>> @@ -31,6 +31,10 @@
> >>>  #define HW_USBPHY_CTRL_SET			0x34
> >>>  #define HW_USBPHY_CTRL_CLR			0x38
> >>>
> >>> +#define HW_USBPHY_IP				0x90
> >>> +#define HW_USBPHY_IP_SET			0x94
> >>> +#define HW_USBPHY_IP_CLR			0x98
> >>> +
> >>>  #define BM_USBPHY_CTRL_SFTRST			BIT(31)
> >>>  #define BM_USBPHY_CTRL_CLKGATE			BIT(30)
> >>>  #define BM_USBPHY_CTRL_ENAUTOSET_USBCLKS	BIT(26)
> >>> @@ -42,6 +46,8 @@
> >>>  #define BM_USBPHY_CTRL_ENUTMILEVEL2		BIT(14)
> >>>  #define BM_USBPHY_CTRL_ENHOSTDISCONDETECT	BIT(1)
> >>>
> >>> +#define BM_USBPHY_IP_FIX                       (BIT(17) | BIT(18))
> >>> +
> >>>  #define to_mxs_phy(p) container_of((p), struct mxs_phy, phy)
> >>>
> >>>  /* Do disconnection between PHY and controller without vbus */
> >>> @@ -97,6 +103,16 @@ struct mxs_phy {
> >>>  	struct regmap *regmap_anatop;
> >>>  };
> >>>
> >>> +static inline bool is_imx6q_phy(struct mxs_phy *mxs_phy)
> >>> +{
> >>> +	return mxs_phy->data == &imx6q_phy_data;
> >>> +}
> >>> +
> >>> +static inline bool is_imx6sl_phy(struct mxs_phy *mxs_phy)
> >>> +{
> >>> +	return mxs_phy->data == &imx6sl_phy_data;
> >>> +}
> >>
> >> Why don't you use a a BIT() here as in Patch 2/17, too?
> >>
> >
> > Thanks, I will define the two PHY problems as the register bit
> > position at 2/17, and use those two MACROs at this patch.
> > Is it your point?
> 
> I was wondering if the driver looks more uniform if you use something
> like this:
> 
> #define MXS_PHY_NEED_IP_FIX		BIT(3)
> 

OK, will change like below:

if (mxs_phy->data->flags & MXS_PHY_NEED_IP_FIX)
	writel(BM_USBPHY_IP_FIX, base + HW_USBPHY_IP_SET);

Peter

��.n��������+%������w��{.n�����{����*jg��������ݢj����G�������j:+v���w�m������w�������h�����٥





[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux