ADP1051: 6 PWM for I/O Voltage, I/O Current, Temperature
ADP1055: 6 PWM for I/O Voltage, I/O Current, Power, Temperature
Signed-off-by: Alexis Cezar Torreno <alexisczezar.torreno@xxxxxxxxxx>
---
Documentation/hwmon/adp1050.rst | 52 ++++++++++++++++++++++++++++++---
drivers/hwmon/pmbus/adp1050.c | 44 +++++++++++++++++++++++++---
2 files changed, 88 insertions(+), 8 deletions(-)
diff --git a/Documentation/hwmon/adp1050.rst b/Documentation/hwmon/adp1050.rst
index 8fa937064886..5e2edcbe0c59 100644
--- a/Documentation/hwmon/adp1050.rst
+++ b/Documentation/hwmon/adp1050.rst
@@ -13,18 +13,33 @@ Supported chips:
Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ADP1050.pdf
+ * Analog Devices ADP1051
+
+ Prefix: 'adp1051'
+
+ Addresses scanned: I2C 0x70 - 0x77
+
+ Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ADP1051.pdf
+
+ * Analog Devices ADP1055
+
+ Prefix: 'adp1055'
+
+ Addresses scanned: I2C 0x4B - 0x77
+
+ Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ADP1055.pdf
+
Authors:
- Radu Sabau <radu.sabau@xxxxxxxxxx>
-
Description
-----------
-This driver supprts hardware monitoring for Analog Devices ADP1050 Digital
-Controller for Isolated Power Supply with PMBus interface.
+This driver supports hardware monitoring for Analog Devices ADP1050, ADP1051, and
+ADP1055 Digital Controller for Isolated Power Supply with PMBus interface.
-The ADP1050 is an advanced digital controller with a PMBus™
+The ADP105X is an advanced digital controller with a PMBus™
interface targeting high density, high efficiency dc-to-dc power
conversion used to monitor system temperatures, voltages and currents.
Through the PMBus interface, the device can monitor input/output voltages,
@@ -49,16 +64,45 @@ Sysfs Attributes
in1_label "vin"
in1_input Measured input voltage
in1_alarm Input voltage alarm
+in1_crit Critical maximum input voltage
+in1_crit_alarm Input voltage high alarm
+in1_lcrit Critical minimum input voltage
+in1_lcrit_alarm Input voltage critical low alarm
in2_label "vout1"
in2_input Measured output voltage
in2_crit Critical maximum output voltage
in2_crit_alarm Output voltage high alarm
in2_lcrit Critical minimum output voltage
in2_lcrit_alarm Output voltage critical low alarm
+in2_max Critical maximum output voltage
+in2_max_alarm Output voltage critical max alarm
+in2_min Critical minimum output voltage
+in2_min_alarm Output voltage critical min alarm
curr1_label "iin"
curr1_input Measured input current.
curr1_alarm Input current alarm
+curr1_crit Critical maximum input current
+curr1_crit_alarm Input current high alarm
+curr2_label "iout1"
+curr2_input Measured output current
+curr2_crit Critical maximum output current
+curr2_crit_alarm Output current high alarm
+curr2_lcrit Critical minimum output current
+curr2_lcrit_alarm Output current critical low alarm
+curr2_max Critical maximum output current
+curr2_max_alarm Output current critical max alarm
+power1_label "pout1"
+power1_input Measured output power
+power1_crit Critical maximum output power
+power1_crit_alarm Output power high alarm
temp1_input Measured temperature
temp1_crit Critical high temperature
temp1_crit_alarm Chip temperature critical high alarm
+temp1_max Critical maximum temperature
+temp1_max_alarm Temperature critical max alarm
+temp2_input Measured temperature
+temp2_crit Critical high temperature
+temp2_crit_alarm Chip temperature critical high alarm
+temp2_max Critical maximum temperature
+temp2_max_alarm Temperature critical max alarm
================= ========================================
diff --git a/drivers/hwmon/pmbus/adp1050.c b/drivers/hwmon/pmbus/adp1050.c
index 20f22730fc01..db2054181d14 100644
--- a/drivers/hwmon/pmbus/adp1050.c
+++ b/drivers/hwmon/pmbus/adp1050.c
@@ -6,8 +6,8 @@
*/
#include <linux/bits.h>
#include <linux/i2c.h>
-#include <linux/mod_devicetable.h>
#include <linux/module.h>
+#include <linux/mod_devicetable.h>
#include "pmbus.h"
@@ -23,19 +23,55 @@ static struct pmbus_driver_info adp1050_info = {
| PMBUS_HAVE_STATUS_TEMP,
};
+static struct pmbus_driver_info adp1051_info = {
+ .pages = 1,
+ .format[PSC_VOLTAGE_IN] = linear,
+ .format[PSC_VOLTAGE_OUT] = linear,
+ .format[PSC_CURRENT_IN] = linear,
+ .format[PSC_TEMPERATURE] = linear,
+ .func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_IIN | PMBUS_HAVE_VOUT
+ | PMBUS_HAVE_IOUT | PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_VOUT
+ | PMBUS_HAVE_STATUS_IOUT | PMBUS_HAVE_STATUS_INPUT
+ | PMBUS_HAVE_STATUS_TEMP,
+};
+
+static struct pmbus_driver_info adp1055_info = {
+ .pages = 1,
+ .format[PSC_VOLTAGE_IN] = linear,
+ .format[PSC_VOLTAGE_OUT] = linear,
+ .format[PSC_CURRENT_IN] = linear,
+ .format[PSC_TEMPERATURE] = linear,
+ .func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_IIN | PMBUS_HAVE_VOUT
+ | PMBUS_HAVE_IOUT | PMBUS_HAVE_TEMP2 | PMBUS_HAVE_TEMP3
+ | PMBUS_HAVE_POUT | PMBUS_HAVE_STATUS_VOUT
+ | PMBUS_HAVE_STATUS_IOUT | PMBUS_HAVE_STATUS_INPUT
+ | PMBUS_HAVE_STATUS_TEMP,
+};
+
static int adp1050_probe(struct i2c_client *client)
{
- return pmbus_do_probe(client, &adp1050_info);
+ const struct pmbus_driver_info *info;
+
+ info = device_get_match_data(&client->dev);
+ if (!info)
+ return -ENODEV;
+
+ return pmbus_do_probe(client, info);
}
static const struct i2c_device_id adp1050_id[] = {
- {"adp1050"},
+ { .name = "adp1050", .driver_data = (kernel_ulong_t)&adp1050_info},
+ { .name = "adp1051", .driver_data = (kernel_ulong_t)&adp1051_info},
+ { .name = "adp1055", .driver_data = (kernel_ulong_t)&adp1055_info},
{}
};
+
MODULE_DEVICE_TABLE(i2c, adp1050_id);
static const struct of_device_id adp1050_of_match[] = {
- { .compatible = "adi,adp1050"},
+ { .compatible = "adi,adp1050", .data = &adp1050_info},
+ { .compatible = "adi,adp1051", .data = &adp1051_info},
+ { .compatible = "adi,adp1055", .data = &adp1055_info},
{}
};
MODULE_DEVICE_TABLE(of, adp1050_of_match);
--
2.34.1
