On Thu, 31 Oct 2024 02:25:04 -0700 Li Li wrote:
> +===========================================================
> +Generic Netlink for the Android Binder Driver (Binder Genl)
> +===========================================================
> +
> +The Generic Netlink subsystem in the Linux kernel provides a generic way for
> +the Linux kernel to communicate to the user space applications via binder
> +driver. It is used to report various kinds of binder transactions to user
> +space administration process. The driver allows multiple binder devices and
> +their corresponding binder contexts. Each context has an independent Generic
> +Netlink for security reason. To prevent untrusted user applications from
> +accessing the netlink data, the kernel driver uses unicast mode instead of
> +multicast.
> +
> +Basically, the user space code uses the "set" command to request what kind
> +of binder transactions reported by the kernel binder driver. The driver then
Something is missing here. s/reported/should be reported/ ?
> +uses "reply" command to acknowledge the request. The "set" command also
> +registers the current user space process to receive the reports. When the
> +user space process exits, the previous request will be reset to prevent any
> +potential leaks.
> +
> +Currently the driver can report binder transactions that "failed" to reach
> +the target process, or that are "delayed" due to the target process being
> +frozen by cgroup freezer, or that are considered "spam" according to existing
> +logic in binder_alloc.c.
> +
> +When the specified binder transactions happen, the driver uses the "report"
> +command to send a generic netlink message to the registered process,
> +containing the payload struct binder_report.
> +
> +More details about the flags, attributes and operations can be found at the
> +the doc sections in Documentations/netlink/specs/binder_genl.yaml and the
> +kernel-doc comments of the new source code in binder.{h|c}.
> +
> +Using Binder Genl
> +-----------------
> +
> +The Binder Genl can be used in the same way as any other generic netlink
> +drivers. Userspace application uses a raw netlink socket to send commands
> +to and receive packets from the kernel driver.
> +
> +.. note::
> + If the userspace application that talks to the driver exits, the kernel
> + driver will automatically reset the configuration to the default and
> + stop sending more reports to prevent leaking memory.
> +
> +Usage example (user space pseudo code):
> +
> +::
> +
> + // open netlink socket
> + int fd = socket(AF_NETLINK, SOCK_RAW, NETLINK_GENERIC);
> +
> + // bind netlink socket
> + bind(fd, struct socketaddr);
> +
> + // get the family id of the binder genl
> + send(fd, CTRL_CMD_GETFAMILY, CTRL_ATTR_FAMILY_NAME, "binder");
> + void *data = recv(CTRL_CMD_NEWFAMILY);
> + __u16 id = nla(data)[CTRL_ATTR_FAMILY_ID];
> +
> + // enable per-context binder report
> + send(fd, id, BINDER_GENL_CMD_SET, 0, BINDER_GENL_FLAG_FAILED |
> + BINDER_GENL_FLAG_DELAYED);
> +
> + // confirm the per-context configuration
> + void *data = recv(fd, BINDER_GENL_CMD_REPLY);
> + __u32 pid = nla(data)[BINDER_GENL_A_CMD_PID];
> + __u32 flags = nla(data)[BINDER_GENL_A_CMD_FLAGS];
> +
> + // set optional per-process report, overriding the per-context one
> + send(fd, id, BINDER_GENL_CMD_SET, getpid(),
> + BINDER_GENL_FLAG_SPAM | BINDER_REPORT_OVERRIDE);
> +
> + // confirm the optional per-process configuration
> + void *data = recv(fd, BINDER_GENL_CMD_REPLY);
> + __u32 pid = nla(data)[BINDER_GENL_A_CMD_PID];
> + __u32 flags = nla(data)[BINDER_GENL_A_CMD_FLAGS];
> +
> + // wait and read all binder reports
> + while (running) {
> + void *data = recv(fd, BINDER_GENL_CMD_REPORT);
> + u32 *attr = nla(data)[BINDER_GENL_A_REPORT_XXX];
> +
> + // process binder report
> + do_something(*attr);
> + }
> +
> + // clean up
> + send(fd, id, BINDER_GENL_CMD_SET, 0, 0);
> + send(fd, id, BINDER_GENL_CMD_SET, getpid(), 0);
> + close(fd);
> diff --git a/Documentation/admin-guide/index.rst b/Documentation/admin-guide/index.rst
> index e85b1adf5908..b3b5cfadffe5 100644
> --- a/Documentation/admin-guide/index.rst
> +++ b/Documentation/admin-guide/index.rst
> @@ -79,6 +79,7 @@ configure specific aspects of kernel behavior to your liking.
> aoe/index
> auxdisplay/index
> bcache
> + binder_genl
> binderfs
> binfmt-misc
> blockdev/index
> diff --git a/Documentation/netlink/specs/binder_genl.yaml b/Documentation/netlink/specs/binder_genl.yaml
> new file mode 100644
> index 000000000000..35e5f0120fc7
> --- /dev/null
> +++ b/Documentation/netlink/specs/binder_genl.yaml
> @@ -0,0 +1,114 @@
> +# SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)
> +
> +name: binder_genl
> +protocol: genetlink
> +uapi-header: linux/android/binder_genl.h
> +doc: Netlink protocol to report binder transaction errors and warnings.
> +
> +definitions:
> + -
> + type: flags
> + name: flag
> + doc: |
> + Used with "set" and "reply" command below, defining what kind of binder
> + transactions reported to the user space administration process.
Please the references to which commands use given enum and attr.
The YAML specs are automatically rendered as HTML:
https://docs.kernel.org/next/networking/netlink_spec/net_shaper.html
so hopefully it's clear which attrs are used where.
> + value-start: 0
I thought flags default to starting from 0 (or rather (1<<0))
Please delete this if it's not needed.
> + entries: [ failed, delayed, spam, override ]
> +
> +attribute-sets:
> + -
> + name: cmd
> + doc: The supported attributes of "set" and "reply" commands
> + attributes:
> + -
> + name: pid
> + type: u32
> + doc: |
> + What binder proc or context to enable binder genl report,
> + used by "set" and "reply" command below.
> + -
> + name: flags
> + type: u32
> + doc: |
> + What kind of binder transactions reported via binder genl,
> + used by "set" and "reply" command below.
> + -
> + name: report
> + doc: The supported attributes of "report" command
> + attributes:
> + -
> + name: err
> + type: u32
> + doc: |
> + Copy of binder_driver_return_protocol returned to the sender,
> + used by "report" command below.
> + -
> + name: from_pid
> + type: u32
> + doc: |
> + Sender pid of the corresponding binder transaction
> + used by "report" command below.
> + -
> + name: from_tid
> + type: u32
> + doc: |
> + Sender tid of the corresponding binder transaction
> + used by "report" command below.
> + -
> + name: to_pid
> + type: u32
> + doc: |
> + Target pid of the corresponding binder transaction
> + used by "report" command below.
> + -
> + name: to_tid
> + type: u32
> + doc: |
> + Target tid of the corresponding binder transaction
> + used by "report" command below.
> + -
> + name: reply
> + type: u32
> + doc: |
> + 1 means the transaction is a reply, 0 otherwise
> + used by "report" command below.
> + -
> + name: flags
> + type: u32
> + doc: |
> + Copy of binder_transaction_data->flags
> + used by "report" command below.
> + -
> + name: code
> + type: u32
> + doc: |
> + Copy of binder_transaction_data->code
> + used by "report" command below.
> + -
> + name: data_size
> + type: u32
> + doc: |
> + Copy of binder_transaction_data->data_size
> + used by "report" command below.
> +
> +operations:
> + list:
> + -
> + name: set
> + doc: |
> + Set flags from user space, requesting what kinds of binder
> + transactions to report.
> + attribute-set: cmd
> +
> + do:
> + request: ¶ms
> + attributes:
> + - pid
> + - flags
> + reply: *params
> + -
> + name: reply
> + doc: Acknowledge the above "set" request, echoing the same params.
Hm, this looks strange. We shouldn't need a separate op entry for reply.
Operations are request + response.
> + -
> + name: report
> + doc: Send the requested binder transaction reports to user space.
This is probably an event and contain the list of fields carried:
https://docs.kernel.org/next/userspace-api/netlink/specs.html
The list of fields is needed for user space C and C++ code gen.
> +/**
> + * binder_genl_set_report() - set binder report flags
> + * @context: the binder context to set the flags
> + * @pid: the target process
> + * @flags: the flags to set
> + *
> + * If pid is 0, the flags are applied to the whole binder context.
> + * Otherwise, the flags are applied to the specific process only.
> + */
> +static int binder_genl_set_report(struct binder_context *context, u32 pid,
> + u32 flags)
> +{
> + struct binder_proc *proc;
> +
> + if (flags != (flags & (BINDER_GENL_FLAG_OVERRIDE
> + | BINDER_GENL_FLAG_FAILED
> + | BINDER_GENL_FLAG_DELAYED
> + | BINDER_GENL_FLAG_SPAM))) {
please add
enum: flag
to the definition of the flags field in YAML.
Netlink will auto-generate a policy checking that only values defined
in the enum are allowed.
> + pr_err("Invalid binder report flags: %u\n", flags);
> + return -EINVAL;
> + }
> +
> + if (!pid) {
> + /* Set the global flags for the whole binder context */
> + context->report_flags = flags;
> + } else {
> + /* Set the per-process flags */
> + proc = binder_find_proc(pid);
> + if (!proc) {
> + pr_err("Invalid binder report pid %u\n", pid);
> + return -EINVAL;
> + }
> +
> + proc->report_flags = flags;
> + }
> +
> + return 0;
> +}
> @@ -6311,6 +6500,83 @@ binder_defer_work(struct binder_proc *proc, enum binder_deferred_state defer)
> mutex_unlock(&binder_deferred_lock);
> }
>
> +/**
> + * binder_genl_nl_set_doit() - .doit handler for BINDER_GENL_CMD_SET
> + * @skb: the metadata struct passed from netlink driver
> + * @info: the generic netlink struct passed from netlink driver
> + *
> + * Implements the .doit function to process binder genl commands.
> + */
> +int binder_genl_nl_set_doit(struct sk_buff *skb, struct genl_info *info)
> +{
> + int payload;
> + int portid;
> + u32 pid;
> + u32 flags;
> + void *hdr;
> + struct binder_context *context;
> +
> + /* Both attributes are required for BINDER_GENL_CMD_SET */
> + if (!info->attrs[BINDER_GENL_A_CMD_PID] || !info->attrs[BINDER_GENL_A_CMD_FLAGS]) {
Use GENL_REQ_ATTR_CHECK, it will set metadata to let user space know
which attrs are missing
> + pr_err("Attributes not set\n");
and then you can delete this
> + return -EINVAL;
> + }
> +
> + portid = nlmsg_hdr(skb)->nlmsg_pid;
> + pid = nla_get_u32(info->attrs[BINDER_GENL_A_CMD_PID]);
> + flags = nla_get_u32(info->attrs[BINDER_GENL_A_CMD_FLAGS]);
> + context = container_of(info->family, struct binder_context,
> + genl_family);
> +
> + if (context->report_portid && context->report_portid != portid) {
> + pr_err("No permission to set report flags from %u\n", portid);
It's better to communicate the errors to application using extack
(inside the netlink reply) using NL_SET_ERR_MSG(info->extack, "yourmsg")
> + return -EPERM;
> + }
> +
> + if (binder_genl_set_report(context, pid, flags) < 0) {
> + pr_err("Failed to set report flags %u for %u\n", flags, pid);
> + return -EINVAL;
> + }
> +
> + payload = nla_total_size(sizeof(pid)) + nla_total_size(sizeof(flags));
> + skb = genlmsg_new(payload + GENL_HDRLEN, GFP_KERNEL);
> + if (!skb) {
> + pr_err("Failed to alloc binder genl reply message\n");
> + return -ENOMEM;
> + }
> +
> + hdr = genlmsg_put_reply(skb, info, info->family, 0,
> + BINDER_GENL_CMD_REPLY);
Use the same ID as the request, the BINDER_GENL_CMD_REPLY
shouldn't exist. And then you can use genlmsg_iput().
> + if (!hdr)
> + goto free_skb;
> +
> + if (nla_put_u32(skb, BINDER_GENL_A_CMD_PID, pid))
> + goto cancel_skb;
> +
> + if (nla_put_u32(skb, BINDER_GENL_A_CMD_FLAGS, flags))
it's typical to chain all the nla_puts..
if (nla_put_u32(skb, BINDER_GENL_A_CMD_PID, pid) ||
nla_put_u32(skb, BINDER_GENL_A_CMD_FLAGS, flags))
to avoid repeating the goto's for every field.
> + goto cancel_skb;
> +
> + genlmsg_end(skb, hdr);
> +
> + if (genlmsg_reply(skb, info)) {
> + pr_err("Failed to send binder genl reply message\n");
> + return -EFAULT;
> + }
> +
> + if (!context->report_portid)
> + context->report_portid = portid;
> +
> + return 0;
> +
> +cancel_skb:
> + pr_err("Failed to add reply attributes to binder genl message\n");
> + genlmsg_cancel(skb, hdr);
> +free_skb:
> + pr_err("Free binder genl reply message on error\n");
> + nlmsg_free(skb);
> + return -EMSGSIZE;
> +}
> +
> static void print_binder_transaction_ilocked(struct seq_file *m,
> struct binder_proc *proc,
> const char *prefix,
> @@ -6894,6 +7160,28 @@ const struct binder_debugfs_entry binder_debugfs_entries[] = {
> {} /* terminator */
> };
>
> +/**
> + * binder_genl_init() - initialize binder generic netlink
> + * @family: the generic netlink family
> + * @name: the binder device name
> + *
> + * Registers the binder generic netlink family.
> + */
> +int binder_genl_init(struct genl_family *family, const char *name)
> +{
> + int ret;
> +
> + memcpy(family, &binder_genl_nl_family, sizeof(*family));
> + strscpy(family->name, name, GENL_NAMSIZ);
You're trying to register multiple families with different names?
The family defines the language / protocol. If you have multiple
entities to multiplex you should do that based on attributes inside
the messages.
> + ret = genl_register_family(family);
> + if (ret) {
> + pr_err("Failed to register binder genl: %s\n", name);
> + return ret;
> + }
> +
> + return 0;
> +}
