Re: [PATCH v3 0/7] virtio-mem: s390 support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Oct 25, 2024 at 04:14:45PM +0200, David Hildenbrand wrote:
> Let's finally add s390 support for virtio-mem; my last RFC was sent
> 4 years ago, and a lot changed in the meantime.
> 
> The latest QEMU series is available at [1], which contains some more
> details and a usage example on s390 (last patch).
> 
> There is not too much in here: The biggest part is querying a new diag(500)
> STORAGE_LIMIT hypercall to obtain the proper "max_physmem_end".
> 
> The last three patches are not strictly required but certainly nice-to-have.
> 
> Note that -- in contrast to standby memory -- virtio-mem memory must be
> configured to be automatically onlined as soon as hotplugged. The easiest
> approach is using the "memhp_default_state=" kernel parameter or by using
> proper udev rules. More details can be found at [2].
> 
> I have reviving+upstreaming a systemd service to handle configuring
> that on my todo list, but for some reason I keep getting distracted ...
> 
> I tested various things, including:
>  * Various memory hotplug/hotunplug combinations
>  * Device hotplug/hotunplug
>  * /proc/iomem output
>  * reboot
>  * kexec
>  * kdump: make sure we properly enter the "kdump mode" in the virtio-mem
>    driver
> 
> kdump support for virtio-mem memory on s390 will be sent out separately.
> 
> v2 -> v3
> * "s390/kdump: make is_kdump_kernel() consistently return "true" in kdump
>    environments only"
>  -> Sent out separately [3]
> * "s390/physmem_info: query diag500(STORAGE LIMIT) to support QEMU/KVM memory
>    devices"
>  -> No query function for diag500 for now.
>  -> Update comment above setup_ident_map_size().
>  -> Optimize/rewrite diag500_storage_limit() [Heiko]
>  -> Change handling in detect_physmem_online_ranges [Alexander]
>  -> Improve documentation.
> * "s390/sparsemem: provide memory_add_physaddr_to_nid() with CONFIG_NUMA"
>  -> Added after testing on systems with CONFIG_NUMA=y
> 
> v1 -> v2:
> * Document the new diag500 subfunction
> * Use "s390" instead of "s390x" consistently
> 
> [1] https://lkml.kernel.org/r/20241008105455.2302628-1-david@xxxxxxxxxx
> [2] https://virtio-mem.gitlab.io/user-guide/user-guide-linux.html
> [3] https://lkml.kernel.org/r/20241023090651.1115507-1-david@xxxxxxxxxx
> 
> Cc: Heiko Carstens <hca@xxxxxxxxxxxxx>
> Cc: Vasily Gorbik <gor@xxxxxxxxxxxxx>
> Cc: Alexander Gordeev <agordeev@xxxxxxxxxxxxx>
> Cc: Christian Borntraeger <borntraeger@xxxxxxxxxxxxx>
> Cc: Sven Schnelle <svens@xxxxxxxxxxxxx>
> Cc: Thomas Huth <thuth@xxxxxxxxxx>
> Cc: Cornelia Huck <cohuck@xxxxxxxxxx>
> Cc: Janosch Frank <frankja@xxxxxxxxxxxxx>
> Cc: Claudio Imbrenda <imbrenda@xxxxxxxxxxxxx>
> Cc: "Michael S. Tsirkin" <mst@xxxxxxxxxx>
> Cc: Jason Wang <jasowang@xxxxxxxxxx>
> Cc: Xuan Zhuo <xuanzhuo@xxxxxxxxxxxxxxxxx>
> Cc: "Eugenio P?rez" <eperezma@xxxxxxxxxx>
> Cc: Eric Farman <farman@xxxxxxxxxxxxx>
> Cc: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
> Cc: Jonathan Corbet <corbet@xxxxxxx>
> 
> David Hildenbrand (7):
>   Documentation: s390-diag.rst: make diag500 a generic KVM hypercall
>   Documentation: s390-diag.rst: document diag500(STORAGE LIMIT)
>     subfunction
>   s390/physmem_info: query diag500(STORAGE LIMIT) to support QEMU/KVM
>     memory devices
>   virtio-mem: s390 support
>   lib/Kconfig.debug: default STRICT_DEVMEM to "y" on s390
>   s390/sparsemem: reduce section size to 128 MiB
>   s390/sparsemem: provide memory_add_physaddr_to_nid() with CONFIG_NUMA
> 
>  Documentation/virt/kvm/s390/s390-diag.rst | 35 +++++++++++++----
>  arch/s390/boot/physmem_info.c             | 47 ++++++++++++++++++++++-
>  arch/s390/boot/startup.c                  |  7 +++-
>  arch/s390/include/asm/physmem_info.h      |  3 ++
>  arch/s390/include/asm/sparsemem.h         | 10 ++++-
>  drivers/virtio/Kconfig                    | 12 +++---
>  lib/Kconfig.debug                         |  2 +-
>  7 files changed, 98 insertions(+), 18 deletions(-)
> 
> 
> base-commit: ae90f6a6170d7a7a1aa4fddf664fbd093e3023bc
> -- 
> 2.46.1
> 

Tested successfully various memory hotplug operations on lpar.

Tested-by: Sumanth Korikkar <sumanthk@xxxxxxxxxxxxx>




[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux FS]     [Yosemite Forum]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux